These are standard specifications for the 1972 Fiat 124, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
4 Manual
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Body / Chassis : | Steel unibody |
| Production Years for Series : | 1966 - 1985 |
| Price : | $2,300-$3,645 |
| Weight : | 1980 lbs | 898.113 kg |
Engine & Transmission
| Inline 4 | |
|---|---|
| Displacement : | 1593 cc | 97.2 cu in. | 1.6 L. |
| Power : | 78.00 SAE @ 6000 RPM |
| Torque : | 85 Ft-Lbs (115 NM) @ 3600 RPM |
| Bore : | 3.2 in | 80 mm. |
| Stroke : | 3.1 in | 79 mm. |
| Compression : | 8.0:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Aluminum |
| 1 2-barrel carburetor | |
| Inline 4 | |
|---|---|
| Displacement : | 1756 cc | 107.2 cu in. | 1.8 L. |
| Power : | 92.50 SAE @ 6200 RPM |
| Torque : | 92 Ft-Lbs (125 NM) @ 3000 RPM |
| Bore : | 3.3 in | 84 mm. |
| Stroke : | 3.1 in | 79 mm. |
| Compression : | 8.0:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Aluminum |
| 1 2-barrel carburetor | |
4 Manual
Production Figures
| Total Fiat Production for 1972 : | 1,390,251 |
| Total 1972 124 production : | 1,368,216 |
| 1972 Fiat 124 | |
Handling
Recall
| Component | TIRES |
|---|---|
| Manufacturer | FIAT MOTORS OF N.A., INC. |
| NHTSA Campaign ID | 72V142000 |
| Notes | POSSIBILITY THAT GOODYEAR TIRES, SIZE 165HR13 G800 GRAND PRIX, MAY NOT CONTAINTREADWEAR INDICATORS AS REQUIRED BY FEDERAL MOTOR VEHICLE SAFETY STANDARD NO.109.(CORRECT BY INSPECTING AND REPLACING TIRES WHERE NECESSARY.) |
| Component | STRUCTURE |
|---|---|
| Manufacturer | FIAT MOTORS OF N.A., INC. |
| NHTSA Campaign ID | 81V091000 |
| Summary | VEHICLES MAY BE SUSCEPTABLE TO HEAVY RUSTING IN STRUCTURALLY SIGNIFICANT AREAS OF THE UNDERCARRIAGE. THIS CONDITION MAY IMPAIR THE ATTACHMENT TO THE BODY OF: 1) THE FRONT UPPER CONTROL ARMS, 2) THE FRONT CROSS MEMBER TO WHICH THE FRONT LOWER CONTROL ARMS ARE ATTACHED, 3) THE STEERING BOX AND IDLER ARM MOUNTING AND 4) THE REAR TRAILING ARM WHICH IS ATTACHED TO THE INTERNAL CROSS MEMBER BELOW THE REAR SEAT AND TO THE REAR AXLE. UNDERCARRIAGE CORROSION IS ACCELERATED BY EXPOSURE TO DE-ICING SALTS. |
| Remedy | ALL OWNERS OF 1970-71 VEHICLES WILL BE SENT LETTERS ADVISING THEM OF THE PROBLEM. DUE TO THE AGE OF THESE VEHICLES OWNERS ARE NOT ENTITLED TO FREE INSPECTION OR REMEDY. 1972-74 VEHICLES WILL BE INSPECTED WITHIN 120 DAYS OF OWNER NOTIFICATION. IF DAMAGE FROM RUSTING IS DETERMINED TO IMPAIR ATTACHMENTS IN ANY OF THE FOUR CRITICAL UNDERBODY LOCATIONS, DEALER WILL OFFER TO REPURCHASE THE VEHICLE. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: STRUCTURE; FRAME CORROSION.CONSEQUENCES OF DEFECT: THE CORROSION WEAKENS THE METAL AND MAY RESULT INSEPARATION OF CRITICAL STEERING AND SUSPENSION COMPONENTS, POSSIBLY CAUSINGLOSS OF VEHICLE CONTROL AND AN ACCIDENT.NOTE: IMPENDING SEPARATION OF THESE COMPONENTS COULD BE INDICATED BY UNUSUALNOISE, TIRE WEAR, VIBRATION, OR STEERING WHEEL PLAY. |
Data updated January 2023
1972 Averages
| Avg. Household Income : | $11,800 |
| Avg. Home : | $27,550 |
| Avg. Gallon of Gas : | $0.55 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1972 Fiat 124?
Q: What is the wheelbase size of the 1972 Fiat 124? A: The 1972 Fiat 124 has a wheelbase size of 89.76 inches.Q: What is the length of the 1972 Fiat 124? A: The 1972 Fiat 124 has lengths of 156.30 and 163.50 inches.Q: What is the width of the 1972 Fiat 124? A: The 1972 Fiat 124 has widths of 63.50-, 64.00-, 65.70-inches.Q: How much did the 1972 Fiat 124 cost when new?A: The 1972 Fiat 124 cost approximately $2,300 to $3,645 (USD) when new.Q: What were the bodystyles of the 1972 Fiat 124? A: The 1972 Fiat 124 was offered as a Abarth Spider Group IV Rally Car, Convertible, Sedan, Sport Coupe, Station Wagon.Q: How many vehicles did Fiat produce in 1972? A: Fiat produced 1,390,251 automobiles in 1972.Q: How many 1972 124s were produced? A: Fiat produced 1,368,216 examples of the 124 in 1972.Q: What engines did the 1972 Fiat 124 have? A: The 1972 Fiat 124 had the following engine options: Inline 4 (1593 cc | 97.2 cu in. | 1.6 L.) with 78.00 SAE @ 6000 RPM and 85 Ft-Lbs (115 NM) @ 3600 RPM Inline 4 (1756 cc | 107.2 cu in. | 1.8 L.) with 92.50 SAE @ 6200 RPM and 92 Ft-Lbs (125 NM) @ 3000 RPM Q: What transmission did the 1972 Fiat 124 have? A: The 1972 Fiat 124 had a 4 speed Manual gearbox.
What are the dimension and mechanical specifications of the 1972 Fiat 124?
How many 1972 Fiat 124 were produced?
How powerful was the 1972 Fiat 124? Was the 1972 Fiat 124 popular? Was the 1972 Fiat 124 expensive? What was the fuel economy of the 1972 Fiat 124?
Q: What is the wheelbase size of the 1972 Fiat 124? A: The 1972 Fiat 124 has a wheelbase size of 89.76 inches.Q: What is the length of the 1972 Fiat 124? A: The 1972 Fiat 124 has lengths of 156.30 and 163.50 inches.Q: What is the width of the 1972 Fiat 124? A: The 1972 Fiat 124 has widths of 63.50-, 64.00-, 65.70-inches.Q: How much did the 1972 Fiat 124 cost when new?A: The 1972 Fiat 124 cost approximately $2,300 to $3,645 (USD) when new.Q: What were the bodystyles of the 1972 Fiat 124? A: The 1972 Fiat 124 was offered as a Abarth Spider Group IV Rally Car, Convertible, Sedan, Sport Coupe, Station Wagon.Q: How many vehicles did Fiat produce in 1972? A: Fiat produced 1,390,251 automobiles in 1972.Q: How many 1972 124s were produced? A: Fiat produced 1,368,216 examples of the 124 in 1972.Q: What engines did the 1972 Fiat 124 have? A: The 1972 Fiat 124 had the following engine options: Inline 4 (1593 cc | 97.2 cu in. | 1.6 L.) with 78.00 SAE @ 6000 RPM and 85 Ft-Lbs (115 NM) @ 3600 RPMSimilarly Sized Vehicles
from 1972
Similarly Priced Vehicles
Fiat Monthly Sales Volume
March 2023
138