Image credits: © Ferrari.

1973 Ferrari 365 GTB/4 Daytona Competizione

History

The 365 Series were introduced in the late 1960's and stayed in production until the early 1970's. The 365's were often powered by a Columbo SOHC 4390 cc V-12 engine with three Weber carburetors capable of producing around 300 horsepower. The front and rear suspension for most of the series was independent with double wishbones and coil springs. The 365 GT4 2+2 had an independent with transverse parallelograms and coil springs suspension. The 365 California had a live axle with coil springs rear suspension. The chassis was an oval tube ladder type frame layout.

Disc brakes were standard on all the vehicles, as was the five-speed manual gearbox. Many of the series received standard options such as power steering and air conditioning, uncommon at the time. When most manufacturers such as Lamborghini and DeTomaso were creating vehicles with mid-engined design, Ferrari continued to use their tried-and-true front-engined, rear wheel design.

In 1967 Ferrari dominated the Daytona 24 Hours race with a first, second, and third place finish. At the 1968 Paris Auto Show the public and press were expecting Ferrari's new berlinetta to be dubbed 'Daytona'. They were proven wrong when Ferrari dubbed the vehicle the 365 GTB/4, however, the name Daytona is a common reference to the vehicle even to this day. Ferrari had intended on using 'Daytona' but it was revealed prematurely so the traditional Ferrari naming sequence was used.

During its production lifespan lasting from 1968 through 1974, 1383 examples of the Pinifarina designed 365 GTB/4 Daytona vehicles were created.

The famous coachbuilder Pininfarina was tasked with creating many of the designs for the 365 Series. The designs were not new, rather they borrowed many of the styling cues of the prior 330 GTC and 275 GTS models. The headlights were courtesy of the 500 Superfast. The result was a visually stunning automobile with proven Ferrari mechanics and performance.

GT represented Gran Turismo. GTB represented Berlinetta or coupe. GTS stood for open models which were either a targa roof or a full convertible. '4' represented four-cam engines. 'C' represented 'Competizione' or 'Corsa' meaning 'to race'.

365 California
In 1966 Ferrari introduced the 365 California at the Geneva Auto Show as a replacement for the Ferrari 500 Superfast. The famous coachbuilder, Pininfarina, had been tasked with creating the body for the vehicle. The result was a two door, two-seat, convertible. The 365 borrowed many of the mechanics of its predecessor including the five-speed manual gearbox, chassis, and suspension. The front of vehicle was similar in design to the 500 with the remaining portions all new. With a top speed of 240 km/h, it was the fastest convertible in the world at the time. Disc brakes provided excellent stopping power for the 1300 kg vehicle. Production continued for only a year with a total of fourteen examples being created.

365 GT2+2
In 1967 Ferrari introduced the 365 GT2+2, only its second production four-seater vehicle. The vehicle would stay in production until 1971 during which around 800 examples being created.

The rear passengers had limited headroom but there was sufficient legroom for most passengers. The purpose of the vehicle was to provided performance and comfort. As a result the vehicle was outfitted with electric windows, leather interior, power assisted brakes, full carpeting, and optional air conditioning.

365 GTC
Near the close of 1968, Ferrari introduced the 365 GTC which stayed in production until 1970. During the production lifespan, 168 examples were produced. The 365 GTC was basically a 330 GTC with a SOHC 4390 cc V-12 engine. Visually, the vehicle was very similar to its predecessor except for the air vents in the front wings had been removed. In their place were black vents placed in the back corners of the hood.

365 GTS
The 365 GTS was a replacement for the 330 GTS. It featured a 4390 cc SOHC engine and had its cooling vents removed in favor of vents in the hood. Only twenty examples were created.

365 GTC/4
In 1971 Ferrari introduced the 365 GTC/4 as a replacement for the 365 GT 2+2. It sat atop a Daytona chassis and given an independent suspension. The same Daytona ventilated disc brakes were used. The gearbox was mounted in the front and the engine was the 4390 cc V12 but with six sidedraught Weber carburetors and wet sump lubrication resulting in 340 horsepower.

The design was once again handled by Pininfarina. The two-door, 2+2 coupe had pop-up headlights and five-spoke alloy wheels. During its production lifespan lasting until 1972, around 500 examples were produced. Strict American safety and emission regulations were partly responsible for the demise of the GTC/4.

365 GT4 2+2
The 365 GT4 2+2 was debuted to the public at the 1972 Paris Auto Show as a replacement for the 365 GT 2+2 and the 365 GTC/4. It sat atop an enlarged 365 GTC/4 chassis and given the same mechanics. The larger chassis meant more interior room for the passengers, especially the rear passengers, and their luggage. The styling was once again assigned to Pininfarina. The design was different from the prior 365 models.

During its production lifespan lasting until 1976, around 470 examples were created.

365 GT4 BB
The 365 GT4 BB, meaning Berlinetta Boxer, was introduced to the public at the 1971 Turin Auto Show. Its styling was similar to the P6 show car built in 1968. The engine was a flat-12 cylinder power-plant mounted longitudinal. The gearbox was mounted under the engine. This was a great design but ultimately created an unbalanced weight distribution with most of the weight over the rear axle. The weight distribution problem and the fact that the engine was mounted high in the vehicle resulted in a car that had poor handling and never achieved successful racing status.

The 365 GT4 BB was replaced by the 512 BB in 1976. The 512 BB was similar in design but featured a five-liter engine.


By Daniel Vaughan | Dec 2006

1973 Vehicle Profiles

1973 Ferrari 365 GTB/4 Daytona Competizione vehicle information

Coupe

Chassis Num: 16407

Ferrari 365 GTB/4 Daytona Competizione with chassis number 16407 is the 14th out of fifteen constructed. It is a left-hand drive vehicle that is eligible for the Ferrari Shell Challenge. It has had an extensive racing carrier and was a N.A.R.T. tea....[continue reading]

1973 Ferrari 365 GTB/4 Daytona Competizione vehicle information

Coupe

Chassis Num: 16343

This Ferrari 365 GTB/4 is the last of the five Daytona Competiziones built. After completion, it was sent to Luigi Chinetti and raced under the N.A.R.T. colors. At Le Mans and Daytona in 1973 it failed to finish. In 1975 it was driven by Jon Woodner ....[continue reading]

Coupe
Chassis #: 16407 
Coupe
Chassis #: 16343 

Recent Vehicle Additions

Related Automotive News

Competition at the Amelia Island Concours

Competition at the Amelia Island Concours

Competition has always been a part of the Amelia Island Concours dElegance. The core group of classes includes four Race Car groups (Prewar, 1946-57, 1958-66, 1967-83). Additionally, there are four...
Alloy Ferrari LWB Competition California Spider and Jaguar C-Type Lead RM Sotheby's New York Sale

Alloy Ferrari LWB Competition California Spider and Jaguar C-Type Lead RM Sotheby's New York Sale

RM Sothebys announces featured entries for ICONS sale, set for 6 December at Sothebys Manhattan Headquarters Auction led by alloy-bodied Ferrari 250 GT LWB California Spider Competizione which c...
Remarkably Pure Ferrari 166 MM Completes RM Sotheby's Stellar Offering at Amelia Island

Remarkably Pure Ferrari 166 MM Completes RM Sotheby's Stellar Offering at Amelia Island

RM Sothebys rounds out superlative Amelia Island catalogue with an exceptionally pure 1950 Ferrari 166 MM Barchetta A two-time Mille Miglia entrant, chassis 0058 M is the latest in a series of mu...

RRDC VOTES IN 26 NEW MEMBERS FOR 2015

HILLIARD, Ohio (Oct. 23, 2015) - Twenty-six race-car drivers and motorsports professionals have been voted into the Road Racing Drivers Club in 2015. The group includes 11 Regular Members from...
TOM FRITZ CREATES 2016 AMELIA CONCOURS POSTER HONORING HANS STUCK

TOM FRITZ CREATES 2016 AMELIA CONCOURS POSTER HONORING HANS STUCK

California-based artist Tom Fritz has created the poster art for the 2016 Amelia Island Concours dElegance honoring multiple Sebring 12 Hour and Le Mans 24 Hour winner Hans Stuck. This is Fritzs second...
© 1998-2020. All rights reserved. The material may not be published, broadcast, rewritten, or redistributed.


Vehicle information, history, and specifications from concept to production.

Follow ConceptCarz on Facebook Follow ConceptCarz on Twitter RSS News Feed

Conceptcarz.com
© 1998-2020 Conceptcarz.com Reproduction or reuse prohibited without written consent.