The MG SA was introduced in 1935 and was the first all-new model introduced following the company's acquisition by Morris Motors. Compared to the previous models, the SA was considerably larger (a wheelbase size of 123 inches compared to the previous MG KN wheelbase size of 108 inches), as was its engine. While the larger footprint meant larger bodies, more seating, and consequently more luxury, it did create a certain amount of consternation amongst enthusiasts who feared the company was headed down a new path, abandoning the traditional virtues embodied by the marque's nimble legacy. The model, however, would prove capable of both duties; leaning towards the luxury car market while staying true to performance virtues worthy of the octagon badge.
Tourer by Charlesworth
Chassis #: SA 1407
Engine #: QPHG1682
View info and history
Auction entries : 2The MG SA used many standardized parts from Wolseley and Morris cars, and its overall length (stretching to 193 inches) was longer than anything being produced by the parent company. Mechanical Specification
The MA SA was based on the Wolseley Super Six and initially powered by its 2,026cc overhead valve six-cylinder Morris QPHG engine, although enlarged to 2,288cc and eventually to 2,322cc in 1937. Due to the large stature of the engine, the twin SU carburetors dashpots were mounted horizontally. The original Morris-based inline six-cylinder engine was rated at 67 brake horsepower, but with its growth to 2,322cc, output rose to 75 horsepower. Power was sent to the live rear axle via a four-speed manual gearbox with synchromesh on the top two ratios. A few of the early examples did not have synchromesh. Behind the wire wheels were drum brakes that were hydraulically operated by a Lockheed system. The four-wheel Lockheed hydraulic braking system fitted to the SA in 1935 was the first for MG, and a much-needed improvement. The solid front and live rear axle were suspended by semi-elliptic springs and lever-arm hydraulic shock absorbers, and a Jackall hydraulic jacking system was fitted as standard equipment. The chassis lubrication system was accessed via nipples grouped under the bonnet.Body Style and Design
At the car's introduction, only a saloon body was offered, built in-house by Morris. It wore the traditional MG grille with two large chrome-plated headlights flanking it on either side. At the rear was a spare wheel residing on the boot lid. The interior was more luxurious and comfortable than previous MG models, with a pair of individual front seats and a rear bench seat. Leather was used for all seating surfaced, and trim pieces and the dashboard were made of walnut. A Philco radio was offered as optional equipment. Additional Coachwork
A Tickford drophead coupe by Salmons and Sons Ltd. became available in April 1936, with the three-position hood (top) allowing owners the choice of fully open, closed, or de Ville style. A winding mechanism was used to open and close the hood, from which originated the term Tickford. (The name would later become associated with the Drophead body style or as the name for the coachbuilder.) The SA Drophead Coupe was bigger than the two-seat Midget and smaller than the four-passenger VA series.
Drop Head Coupe by Tickford
Chassis #: SA 2018
Engine #: QPHG2301
View info and history
Auction entries : 1In July, coachbuilders Charlesworth offered a four-door tourer. A small number (approximately nine) of chassis were imported to Switzerland by J.H. Keller's Sportcar of Zurich, to be bodied in a drophead coupe style by Reinbolt and Christé of Basel.Production
Approximately 2,739 MG SA models were built, with 350 examples exported. Charlesworth tailored attractive open bodies for about 90 SA chassis; Reinbolt and Christé created around nine cabriolets. The MG SA was a capable touring car fit for a demanding clientele, and its styling and large size allowed it to compete in the marketplace with Lagonda and Jaguar. The coachwork complemented the high-quality mechanical construction and matched its sporty persona.
by Daniel Vaughan | Sep 2023
Tourer by Charlesworth
Chassis #: SA 1407
Engine #: QPHG1682
View info and history
Auction entries : 2
The MA SA was based on the Wolseley Super Six and initially powered by its 2,026cc overhead valve six-cylinder Morris QPHG engine, although enlarged to 2,288cc and eventually to 2,322cc in 1937. Due to the large stature of the engine, the twin SU carburetors dashpots were mounted horizontally. The original Morris-based inline six-cylinder engine was rated at 67 brake horsepower, but with its growth to 2,322cc, output rose to 75 horsepower. Power was sent to the live rear axle via a four-speed manual gearbox with synchromesh on the top two ratios. A few of the early examples did not have synchromesh. Behind the wire wheels were drum brakes that were hydraulically operated by a Lockheed system. The four-wheel Lockheed hydraulic braking system fitted to the SA in 1935 was the first for MG, and a much-needed improvement. The solid front and live rear axle were suspended by semi-elliptic springs and lever-arm hydraulic shock absorbers, and a Jackall hydraulic jacking system was fitted as standard equipment. The chassis lubrication system was accessed via nipples grouped under the bonnet.Body Style and Design
At the car's introduction, only a saloon body was offered, built in-house by Morris. It wore the traditional MG grille with two large chrome-plated headlights flanking it on either side. At the rear was a spare wheel residing on the boot lid. The interior was more luxurious and comfortable than previous MG models, with a pair of individual front seats and a rear bench seat. Leather was used for all seating surfaced, and trim pieces and the dashboard were made of walnut. A Philco radio was offered as optional equipment. Additional Coachwork
A Tickford drophead coupe by Salmons and Sons Ltd. became available in April 1936, with the three-position hood (top) allowing owners the choice of fully open, closed, or de Ville style. A winding mechanism was used to open and close the hood, from which originated the term Tickford. (The name would later become associated with the Drophead body style or as the name for the coachbuilder.) The SA Drophead Coupe was bigger than the two-seat Midget and smaller than the four-passenger VA series.
Drop Head Coupe by Tickford
Chassis #: SA 2018
Engine #: QPHG2301
View info and history
Auction entries : 1
Approximately 2,739 MG SA models were built, with 350 examples exported. Charlesworth tailored attractive open bodies for about 90 SA chassis; Reinbolt and Christé created around nine cabriolets. The MG SA was a capable touring car fit for a demanding clientele, and its styling and large size allowed it to compete in the marketplace with Lagonda and Jaguar. The coachwork complemented the high-quality mechanical construction and matched its sporty persona.
by Daniel Vaughan | Sep 2023
Related Reading : MG SA History
The MG SA was produced from 1936 through 1939. It was originally known as the 2-liter, but its name was later changed to the SA. During its production lifespan, 2739 examples were produced. The SA was intended to be a sporty model, capable of rivaling other sports cars from marques such as Bentley. A prototype car was designed in 1935. The merger between MG and Morris Motors in the same year....
Continue Reading >>
Continue Reading >>
Similarly Sized Vehicles
from 1937
1937 MG SA Vehicle Profiles
Recent Vehicle Additions
Performance and Specification Comparison
SA Charlesworth Tourer Specification Comparison by Year
Year
Production
Wheelbase
Engine
Prices
Related Automotive News
Barrett-Jackson Supercharges Collector Car Hobby During Scottsdale Fall Auction with More Than $56.6 Million in Total Auction Sales, Led by Rock & Roll Hall of Famer Sammy Hagar's 2015 Ferrari LaFerrari for $4.675 Million
The four-day auction featured 794 collectible vehicles that generated more than %2455 million in auction sales with a 99.9 percent sell-through rate
On Super Saturday, rock n roll legend Sammy Hagar was on the block for the sale of his 20...
Fearsome and Solidly Original 1971 Hemi Challenger a Feature at Russo and Steele's Scottsdale Auction Event
Scottsdale, Arizona (January 3rd, 2017) – The Chrysler E-bodies might have been the last to enter Detroits pony car game. Though critics argue that the best were saved for last with these cars, making their introduction more than five years after...
Extremely Original 'Holy Grail' 1970 Oldsmobile 442 W-30 Convertible at Russo and Steele's 2016 Arizona Auction Event
Scottsdale, Arizona (November 24, 2015) – While Oldsmobile is believed to have created the first true American muscle car with the release of its 303 V-8 Rocket 88 in 1949, it was not until 1964 that it returned to the concept with the 442 option,...
Barrett-Jackson Flavors Its January Scottsdale Auction With NASCAR Treats
RACING HERITAGE, HIGH PERFORMANCE ARE RECIPES FOR CAR-COLLECTING FEAST
SPEED™ SET FOR 39 HOURS of LIVE COVERAGE STARTING JAN. 15
The great Henry Ford once said, Auto racing began five minutes after the second car was built.
...
TOPLINE COLLECTORS PLACE SPOTLIGHT on SPEED'S BARRETT-JACKSON BROADCAST FROM SCOTTSDALE
TOPLINE COLLECTORS PLACE SPOTLIGHT on SPEEDS BARRETT-JACKSON BROADCAST FROM SCOTTSDALE
LOST SHELBY DUAL PROTOTYPE, HAGERTY GIVEAWAY %26 SALON COLLECTION HIGHLIGHT 39 HOURS OF LIVE COVERAGE
The 42nd annual Barrett-Jackson Scottsdale (Ar...