1980 Ferrari 308

The 308 GTB and GTS were the first road cars with Ferrari badges to not house a twelve-cylinder engine. Power was supplied by an all-alloy double overhead cam transverse-mounted V8 engine that was 2927 cc in size and produced just over 200 horsepower. It initially produced over 250 horsepower. Power was sent to the rear wheels through a five-speed manual gearbox. Braking was rather good due to the four-wheel power-assisted ventilated disc brakes. Sitting on a 92.1-inch wheelbase, the vehicle was suspended in place with four-wheel independent suspension via unequal-length control arms, coil springs, and telescopic dampers. Handling was exceptional and smooth.

The Ferrari 308 GTB was designed by Pininfarina and followed the Bertone-designed 308 GT4. For many, the Pininfarina design was astonishing while the Bertone version was criticized as being boring. Many of the styling cues for the 308 were borrowed from the 246 Dino.

The carbureted engine was unable to comply with the ever-growing list of safety and government regulations so a Bosch K-Jetronic fuel injection system was fitted, creating the 308 GTSi. Though there was a decrease in power there was an increase in reliability. The engine ran smoother and started without hesitation. In what seemed like a response to this new luxury the interior was restyled. The console became more ergonomically with revised instrumentation. The seats became better fitting and more comfortable. What the car lost in performance was more than made up for in style and comfort.

1980 was the final year for the carbureted-engine version of the 308 (a Bosch K-Jetronic mechanical fuel injection system was added - Ferrari highlighted the change by adding the letter 'i' to its nomenclature). It was available as a coupe or Targa with the coupe selling for $40,580. The Targa was listed at $44,910. From 1975 through 1980 Ferrari sold approximately 3,665 Type 308 (GTB, GTS and 208 GTB). Powering the 308 was a dual-overhead-cam eight-cylinder engine displacing 178.6 cubic-inches and offering 205 horsepower. It was tied to a five-speed manual gearbox and fitted with disc brakes at all four corners. The GTB version had a top speed of 147 mph and raced from zero-to-sixty in 8.2 seconds.

by Dan Vaughan

Targa Coupe by Scaglietti

The magnificent 1980 Ferrari 308 GTBi featured here is finished in the factory-correct shade of Rosso Chiaro over a black Connolly leather interior. This particular example was completed at the Maranello works in August 1980 and was sold new through F.A.F. motorcars in Georgia to an Ohio dealer. Available records show that the 308 was still registered in Ohio as late as 1995, with a recorded 3,256 miles. By 2011, the Ferrari was in Florida, with only 400 more miles added to the odometer. Today, this desirable Ferrari presents wonderfully, with only 4,208 miles present on the odometer. The original warranty and service book verifies that the 2.9 liter DOHC V8 engine is numbers matching. The original owner's manual, service records, tool kit, jack and original window sticker also accompany the car.

by Dan Vaughan

One of the most well-respected Ferraris to ever roll out of Maranello was the Dino 246, an irony when one considers the car's position in its parent brand's model lineup. An entry level vehicle with only half the cylinders of its famous big brothers, the Dino wasn't even branded as a Ferrari—it wore no prancing horse motifs and had a yellow 'Dino' badge on its nose in place of the familiar, upright rectangle. It was drop-dead gorgeous, though, and it drove with athletic grace. It inspired a new class of mid-engined Ferrari sports cars that often out-handled their more expensive (and more expansive) siblings. When the Ferrari 308 was launched in October of 1975 to replace the Dino 246, it had to meet exceptionally high expectations.

After seeing that even a V6 engine wasn't likely to tarnish the brand's sparkling reputation, Ferrari repealed the bottom-feeder 'Dino' nameplate for the V8-powered 308. With a proper badge on its nose and a triumphant horse dancing on its tail, the 308's rich bloodline was flaunted with pride. This was, of course, only appropriate for a car that looked, sounded, and went like Italy's finest.

The 308 experienced a long production run, and during that time the car was slowly strangled by evolving emissions regulations that stunted its performance. Additionally, weight was added to the car very early in its production when the fiberglass bodies were replaced by steel units. Luckily, though, Ferrari has never been a company to sit back and watch as one of their cars suffers growing pains. The home of the Prancing Horse countered the aging 308's shrinking muscles and growing gut with a midlife crisis to rival the most lavish hair transplants and tummy tucks in the form of the revised Quattrovalvole model.

In 1982, when it was clear that the 308 was growing tired, Ferrari revitalized the car with the introduction of the 308 Quattrovalvole. Translated into English, the Quattrovalvole name means 'four valves.' The new nomenclature referred to a redesigned head featuring four valves per cylinder, a first for Ferrari. The updated mill still displaced 2,962cc, and was mounted transversely behind the cockpit. The compression ratio was increased from 8.8:1 to 9.2:1 (though U.S. versions made due with an 8.6:1 ratio).

The use of Bosh K-Jetronic fuel injection was continued. When first adopted by the 308 in late 1980, the fuel injected engines produced less power than their carbureted predecessors. The power of the old carbureted models was restored with the Quattrovalvole, though. The revised engines produced 240bhp at 7,000 rpm (230bhp at 6,800rpm for U.S. versions), and enabled 0-60 times of 6.1 seconds and top speeds of 155mph.

Two body styles were offered to Quattrovalvole customers, the 308 GTBi and the 308 GTSi. The former was a coupe, while the latter came with a removable roof panel. The 308 design was penned by Pininfarina, and the Quattrovalvole models had several styling features unique to them. New side mirrors and horizontal vents across the width of the 'hood' (front lid) were included, along with a subtly reworked front grille and bumper treatment incorporating driving lights. Beginning in 1984, body panels for the Quattrovalvoles were coated to prevent corrosion.

Ferrari produced the 308 Quattrovalvole until 1985, when the 308 model range was succeeded by the 328. The 308 models in general make exceptional 'starter' Ferraris for enthusiasts who seek to experience the thrills of exotic car ownership for the price of a new Camry. Though Quattrovalvole values are on the upper end of the 308 cost spectrum, they offer an unbeatable pedigree-to-price ratio.

Sources:

'Ferrari 308 Part 4: 308 Quattrovalvole.' QV500.com (2008): n. pag. Web. 6 Jan 2010. http://www.qv500.com/ferrari308p1.php.

Oldham, Scott. 'Long-Term Test: 1984 Ferrari 308 GTSi Quattrovalvole.' Inside Line (2007): n. pag. Web. 6 Jan 2010. http://www.insideline.com/ferrari/308/1984/long-term-test-1984-ferrari-308-gtsi-quattrovalvole.html.

by Evan Acuña

The Pininfarina designed Ferrari 308 was debut in 1975 and was immediately a success. The vehicle's performance, handling, and styling were phenomenal.

For the initial 18 months of the 308 GTB's production, fiberglass was predominately used for the bodies but later switched to all-metal. The fiberglass bodies were around 125 kg lighter.

The 308 was capable of producing 255 bhp from its 3 liter, V8, carburetor engine. In 1980, a Bosch K-Jetronic fuel injection system was installed due to new emission regulations. This caused the horsepower to drop to around 215 hp, thus making the 308 GTBi the slowest of the 308 series.

In the early 1980s, Ferrari introduced 4 valve heads for the 3 liter V8's. This 308's now became known as 308 GTB/GTS Quattrovalvole. The engine now produced 240 BHP, and with the extra weight that was imposed due to using all-metal rather than fiberglass, the performance and handling were back to where it was when it began production.

In 1985, Ferrari introduced the 328 GTB/GTS. A vehicle that came equipped with a 3185 cc engine that produced 270 BHP.

by Dan Vaughan

The 308 was Ferrari's first two-seat V8 road car. Made available to the public in 1975, it was the long awaited successor to the incomparable Dino 246 GT. The 308 series was a new beginning for the company as the premier builder of exotic sports cars for road use. As such, the 308 was designed to epitomize the sports car in its era. It did so admirably, and remains perhaps the most influential enthusiast car in history. The 308 is the car against which every subsequent sports car has been measured, upon which every Ferrari V8 sports and racing car has been based, and the car that brought Ferrari from the pinnacle of elite car-culture recognition into the minds of the general public. 25 years later, the shape and sound of the 308 is still 'Ferrari' in the minds of many people.

Design

The Ferrari 308 GTS provided Pininfarina with an opportunity to flex its design and styling muscle. The company responded by redefining the public's collective impression of what a Ferrari, and indeed what a sportscar, should look like. The task given Pininfarina was the creation of a two-seat mid-engined V8, and few can have expected the Turin designer to respond with such a tour de force.

The 308's shape bears a passing resemblance to Pininfarina's Dino 246 GT. Where the older car was the ultimate expression of curvaceous 1960's styling, the 308 hinted far more at the future. From its sharp nose incorporating a slim bumper and a deep air dam, to its retractable headlights and row of black louvres that vent air from the radiator, the line flows up the windshield and out around the flanks to reunite

with itself at the buttress C-pillars, ending in a very subtle rear lip spoiler. The design is so beautiful and effective that it has been a basis for exterior styling of every subsequent V8 Ferrari and an object of study for design students the world over.

GTS models had louvered panels over the whole of their rear quarter windows. Increased venting front and rear served to improve cooling with each evolution of the engine. By and large, however, the design of the 308 was so iconic and effective that it was virtually unchanged throughout its decade of production.

Drivetrain

The heart of the 308 series was its three litre V8 engine. The 2926cc Ferrari V8 was something of a departure for the company, which had mostly relied on V12s. With the V8, Ferrari could offer much of the power of their legendary V12s while improving fuel economy and saving space. By placing the engine and transmission transversely Ferrari was able to reduce the length of their new sports cars and concentrate the mass within the wheelbase, a lesson of racing.

The transmission in the 308 was a five speed with reverse all synchromesh unit. Mounted transversely like the engine, the transmission received power through an unassisted single plate clutch. The gears sent power to the rear wheels through a limited slip differential and solid driveshafts with constant velocity joints.

by Ferrari