conceptcarz.com

1958 Porsche 550 A

Spyder
Chassis number: 550A-0145

The Porsche 550 Spyder was the company's dedicated competition model that was used by both the factory and privateers. It was very successful and dominated the small-displacement international sports car competition for nearly a decade starting in the mid-1950s.

The second model, the 550A, was the result of significant improvements. 40 examples of the 550A were built and included a change to a space-frame design, a first for Porsche, a modified body shape design, and the spare tire and wheel were moved to the front of the car to improve weight distribution. The rear suspension was now comprised of trailing arms instead of the 550's swing axles. Power continued to be from Ernst Fuhrmann's four-cam, flat-four engine.

Most of the 550As were sold from new to privateer racers. This particular example, however, chassis 550A-0145 is the second-to-last 550A built. It was campaigned as a works entry by Porsche in 1958 in four world championship races. Its most significant outings were at the 1000 Km Nürburgring (1st in Class), 12 Hours of Reims (1st in Class), and a 2nd in Class and 5th Overall at the 1958 24 Hours of Le Mans. It raced in the Dutch Grand Prix at Zandvoort.

Count Carel Godin de Beaufort of the Netherlands acquired the car from Porsche in April of 1958. He was the owner and driver for all the races listed above, and he would later compete in additional events in 1958 both as a private and works entrant.

de Beaufort sold 550A-0145 to Eglinton Caledonia Motors in Toronto, Canada in 1960. It was raced in various events in 1959 and 1960 by Peter Ryan and Jim Muzzin, before being sold to Muzzin circa 1961. Muzzin continued to expand the car's racing resume through 1962 under the Willies Downtown Porsche Service banner before the car was eventually sold to an owner in California, around 1967. It would remain in California, including a period of ownership of Warren Eads (around 1989), until being exported to Europe in 1991. In 2002, Bruno Ferracin purchased the car and eventually drove it in ten consecutive Mille Miglia retrospectives.

The engine was fully rebuilt in 2012.

The current owner acquired the car in 2013. It is currently finished in its number 32 livery from the 1958 24 Hours of LeMans. The four-cam engine is stamped P90127, and the installed gearbox is a period four-speed unit. The original five-speed gearbox, numbered 690035, is still with the car. The car rides on RS60-sped 4.5-inch-wide bi-metallic wheels, has correct woven upholstery, two aluminum bucket seats, a period Spyder racing jack, voltage regulation, glass fuel-pressure bowl and oil thermostat assembly.

by Dan Vaughan


Spyder
Chassis number: 0144

This Porsche 550A, serial number 144, is a rare example of a race car that has not been restored. There is no record as to why this 'development 356' was called the 550 - perhaps it is because its quoted weight is 550kg (or 1212.5 lb). Erwin Komenda's design drew heavily on Walter Glockler's custom-built 356, the car having a simple steel ladder frame with an Ernst Fuhrmann-designed 1500cc, flat-4-cylinder air-cooled motor installed ahead of the gearbox, and not behind it. By 1958 the motors developed nearly 130 horsepower, which coupled with their lightweight and aero shape, meant they were capable of giant-killing performance. Porsche's first proper race car was an unmitigated success.

Spyder 550A 0144 is a true 'time capsule.' For nearly 50 years 0144 was parked for a resting period in a Midwestern garage, safe from the elements of nature.

After suffering from a broken valve spring at Daytona in 1963, 0144 was quietly tucked away in the corner of then owner Jim Watson's garage and put to rest for another day of racing. Jim 'Watson' had just become a partner in a Porsche dealership, and that meant his racing would take a back seat to the endeavors of running the service department of his dealership. After a few years, Watson sold his interest in the dealership and started his own repair service - he got even busier, and 0144 sat quietly - waiting for another day of racing.

In 1988 Watson sold one-half of his interest in 0144 to his friend Tommy Trabue. Friends for over 4 decades, Trabue, a passionate vintage Porsche collector and racer, had a major corporation to run while overseeing the restoration of other vintage Porsche race and road cars. Both Watson and Trabue were busy. 0144 was still waiting.

Fast forward to 2011, with some prodding from friends, Watson's and Trabue's 0144, still unrestored, had a mechanical 'freshening' and made its way to the 2012 Monterey Motorsports Reunion. By August of 2014, 0144's engine has had a complete rebuild & restoration by Adrian Gang. The capable hands of Urs Gretener and his team have readied 0144 for the track, complete with the battle scars of a history of racing.


After World War II, Walter Glockler of Frankfurt was one of the first to own a Volkswagen dealership. He was an amateur motorcycle racer that had ventured into auto racing once he had financial backing from his successful dealership. One of his engineers working at the dealership had worked on prewar Adler sports cars and had amassed a wealth of racing knowledge and expertise. In 1948 they modified a Hanomag engine and placed it mid-ship creating a very competitive racer. In 1950 they continued with their mid-engined configuration but switched to an L1-liter Porsche engine. The rear suspension was reversed and mounted to a tube-frame chassis with the driver sitting in the center of the vehicle to optimize weight distribution. The body was created by C. H. Weidenhausen and constructed of aluminum and weighed less than 1000 pounds. The combination was enough to gain Glockler the 1100 cc Sports Car Championship. For the following season, Glockler had the engine converted to run on alcohol which improved the horsepower output and kept it competitive for another season. These were the beginnings of the highly successful Glockler specials.

Collaboration between Porsche and Glockler began. Porsche was seeking publicity and recognition for his products to further stimulate sales while Glockler enjoyed the latest engine development and new products. This partnership continued for a number of years before Porsche began building his own series of racing cars. Ernst Fuhrmann was given the task of creating an engine suitable for competition; the project was dubbed 547, while Wilhelm Hild was tasked with creating a new chassis, dubbed Project 550. The resulting design was similar to the mid-engined Glockler, consisting of a steel tube ladder frame with six cross members. The drivetrain from a 356 was modified and placed behind the driver but in front of the rear axle. The suspension was basically a stock 356 unit with minor modifications to accommodate the extra weight and demands of racing.

Hild completed two chassis but the engine development was still not ready. Instead, an engine from a 356 1500 Super was modified to run on alcohol, resulting in nearly 100 horsepower, and installed in the engine bay. It was then slightly detuned to achieve an optimal compression of 9.0:1 which lowered the horsepower to nearly 80 but increased its reliability.

The first Porsche 550, outfitted with a Roadster body, had its racing debut at the Eiffel Races at Nurburging. Piloted by Helm Glockler, the Porsche immediately proved its capabilities. Unfortunately, the weather was poor and there were problems with a carburetor but it was not enough from keeping Glockler and the 550 from winning the race. Even with strong competition, its first race had been victorious. Porsche turned his sights onto the grueling but prestigious 24 Hours of LeMans endurance race.

LeMans is a high-speed track and manufacturers often build custom bodies for their cars to take advantage of better aerodynamics to achieve higher speeds. Two cars were prepared by Porsche for the race, both with coupe bodies. They were entered into the 1101-1500 cc class and by the end of the race had easily beaten the competition. Overall, they had finished 15th and 16th. Porsche 550-02 driven by Richard Frankenberg and Paul Frere were awarded the class victory. The cars were later raced in two German competition events.

Ernst Furhmann continued on his engine development project, under strict direction to stay in the 1500 cc limit. He borrowed from one of his previous designs; a flat-12 engine used in the Cisitalia Grand Prix car. It had a large bore and a small stroke. Instead of using the overhead valve configuration of the 356's, he went with an overhead camshaft design where each set of two cylinders had two overhead camshafts driven by shafts. When the new engine was complete, it was placed in a new 550 chassis which had continued the evolution of design, strength, rigidity, and weight reduction. It was still a tubular frame but had been modified through knowledge gained from testing and racing. A new body was created, designed by Erwin Komenda, and in a similar fashion to the original bodies of the other 550's.

This newly developed 550 was first shown to the public at the 1953 Hockenheim Grand Prix where it was unable to match the speeds of the 550 Coupe. It was raced a week later at a Hillclimb where it scored a respectable third-place finish. A month later a fifth 550 was on display at the Paris Motorshow where it was accompanied by news that the 550 RS Spyder would soon enter production and be available in 1954. The show car had a few luxurious that was void on the other racers, such as a full windshield with wipers, seating for two, a convertible top, and the convenience of a lockable glove-box. Porsche worked hard on getting the 550's ready for racing during 1953 and 1954. Near the close of 1954, the vehicles were ready. In the hands of capable privateers, the 550's quickly began amassing many victories often beating the larger engine competition. One of the owners of a 550 Spyder, serial number 550-0055, was the legendary James Dean who nicknamed his machine 'Little Bastard.' On September 30th, 1955 at the intersection of Highways 466 and 41, James Dean's life came to a close while driving the 550 Spyder.

The original two 550's were prepared for the Carrera Panamerica race in 1953. Adorned with sponsor stickers and livery the two cars easily dominated the 1500 cc class. Jose Herrate's 550-02 emerged victorious though 550-01, driven by Jaroslav Juhan, was the faster of the two but forced to retire due to mechanical difficulties. The following year 550-04, outfitted with the Fuhrmann quad-cam engine, was entered into the Carrera Panamerica race where it finished third overall and first in class. In honor of these accomplishments, the 356 models outfitted with the Fuhrmann engine were now dubbed 'Carrera'.

In total there were around 90 examples of 550 RS Spyders created with 78 being sectioned for public use. In 1956 Porsche introduced the 550A which looked nearly identical to its predecessor but featured many mechanical improvements including a spaceframe chassis coupled to a Fuhrmann four-cam 547 engine capable of producing over 130 horsepower. It featured a five-speed manual gearbox and multi-link suspension which greatly improved the handling while reducing over-steer.

The Porsche 550 was a very successful car that showcased the capabilities and creativity of Porsche. Throughout the years to come, new Porsches were created that were bigger, better, and faster, and continued the tradition on the racing circuits of this historic pedigree.

by Dan Vaughan


1959/60 Porsche 718 RS 60 Spyder

Automobile sport was part of the picture for the fledgling Porsche sports car firm from the first. The 356 quickly became popular around the world, in the hands of private drivers with sporting ambitions. New racesports cars were developed in Zuffenhausen at the beginning of the fifties: the1.5 liter 550 Spyder proved a shark in the goldfish bowl against larger-displacement competitors in major races. This Spyder used the first engine developed by Porsche for Porsche: the Type 547 with 1.5 liter displacement and four, shaft-driven, overhead camshafts.

Porsche had made the change from a floor pan to tubular space frame for racesport construction, established the five-speed gearbox, continued to increase performance and fitted larger drum brakes. These improvements, along with countless other modifications, kept the Spyder at the head of the ' small sports car class ' (up to 1500 cc) throughout the fifties.

But 1960 brought new regulations for racesports cars, leading to the Spyder RS 60 with displacement increased to 1600 cc, larger windshield, a 'functional' top and a regulation trunk in the tail, behind a four-cam engine which now produced 160 HP. This RS 60 brought Porsche its finest results up to that time, particularly in long-distance events. While an overall victory in the 44th Targa Florio in 1960 by Bonnier/Herrmann, with a lead of more than 6 minutes over a 3 liter Ferrari, was within the range of previous achievements - sports cars from Zuffenhausen had already captured overall Targa Florio victories in l956 and 1959 - a new Porsche chapter opened with the first appearance of the RS 60 at the 12 hours of Sebring in the USA. Olivier Gendebien and Hans Herrmann won outright while Holbert/Scheckter/Fowler drove a second factory RS 60 into second, ahead of Nethercutt/Lovely in a 3 liter Ferrari Dino. Swiss driver Heini Walter, at the wheel of an RS 60, secured Porsche's third and fourth European Hillclimb Championships in 1960 and 1961, following those from 1958 by Count Berghe von Trips and 1959 by Edgar Barth.

by Porsche

by Porsche