conceptcarz.com

2005 Ferrari Enzo

The race track has always been the testing ground for the advanced technological research that has later gone into Ferrari's road cars. The very first Ferrari, built in 1947, was a 12-cylinder racing car. From that first 12-cylinder, 126 more were born, destined for both track and road.

The Enzo Ferrari is not only the marque's latest V12, it is also a pinnacle of excellence drawing on the experience of victories in the last four years of the Formula 1 World Championship, thus endowed with the very latest automobile technology.

Company founder Enzo Ferrari himself, always felt that design of the road cars should stem from the racers. Therefore, it was entirely logical that the company's latest creation should bear his name

The Enzo, built in a limited run of 399, is an outstanding expression of the concept of extreme sportiness, developed for road use, yet epitomising the most advanced concepts of Formula 1 racing technology

Ferrari set out to develop the Enzo as an integrated system designed for extreme performance, in which even the limits of the performance achievable by the driver were enhanced, thanks to a man-machine interface typical of Formula 1.

by Ferrari S.p.A

by Ferrari


The concept of the extreme sports car has been demonstrated by extraordinary models in Ferrari's history. Some of the most recent models include the 288 GTO of 1984, the F40 of 1987 and the F50 of 1995. The common denominator in each case was not only the uniqueness of their performance but also the exclusiveness that came from being built in limited numbers.

It is in this spirit that the Enzo Ferrari was launched in 2002 as an outstanding expression of the concept of extreme sportiness. The car was developed for road use in 399 units only. The Enzo Ferrari epitomises the most advanced concepts of Formula One racing technology. The Enzo Ferrari has a unique advantage, because it benefits from an intense, successful transfer of technology generated by the long list of Ferrari victories in Formula One. Drawing on this immense technological heritage, Ferrari set out to develop the Enzo as an integrated system designed for extreme performance.

Styling

Never before has a car's style derived so directly from functions as is the case here. This is courtesy of the work done in Ferrari's wind tunnel, as well as on the track and road with Michael Schumacher and the Prancing Horse's own highly experienced test drivers.

At the front, the Enzo Ferrari's design is heavily influenced both in form and function by the Formula One racer. It benefits from the use of composites, having been sculpted to optimise air-flow with respect to internal fluid dynamics. Rather than a large spoiler at the rear, the Enzo boasts small aerodynamic appendages and very efficient ground effects. Pininfarina has succeeded brilliantly in harmonising these and a range of other functions.

Interior

The ‘pure, hard' spirit of the car, the limited space, and the aim of keeping things as light as possible suggest an extremely functional style to the interior. All of the main surfaces are fashioned of unadorned carbon fibre. A number of vehicle controls are clustered together on the steering wheel, a feature borrowed from Formula One which concentrates as many controls as possible on the wheel.

The structure of the racing seats is created entirely from carbon fibre and the driver can also adjust the squab-seat combination to obtain a perfect driving posture. The seats wrap around the driver very effectively.

Chassis and Powertrain

For the Enzo project, the chassis was built entirely from carbon fibre and aluminium honeycomb-sandwich panels, which made it possible to meet the demands of rigidity, lightness and safety.

The engine of the Ferrari Enzo is a 12-cylinder aspirated unit in a 65-degree? V, with a design that draws on Formula One.

The characteristics of this engine – known by the project number F140 – are a total displacement of 5998 cc, with a maximum power of 660 bhp at 7800 rpm and a torque of 657 Nm at 5550 rpm. The compression ratio is 11.2 and the engine shows a specific power of 110 horsepower per litre.

Brakes

Developed by Brembo, the brakes of the Ferrari Enzo are manufactured of carbon ceramic material (CCM).

by Ferrari

by Ferrari


Coupe
Chassis number: ZFFCZ56B000141920
Engine number: 91280

Adorned in white for purity, but washed in the red blood of Jesus Christ, the Pope is to represent the one 'Catholic' church. For a man gifted salvation, what else could ever come close? Perhaps a chariot adorned in red with a prancing horse carrying it aloft where only angels tread.

It had been a couple of decades since Scuderia Ferrari had a World Champion. However, with the presence of one Michael Schumacher it seemed the titles would never leave Maranello. Earning the first title for the marque with the start of the new millennium it was decided a new supercar needed to be designed to commemorate the occasion. But, when it came to giving the new car a name, great care had to be taken.

Enzo Ferrari was demanding and only really appreciated those drivers that drove on the raged edge each and every moment of each and every lap. The designers and builders at Ferrari had to make sure then, if the car was to bear the founder's name, that it was as radical and as on-the-edge as Enzo would have liked.

Such a car needed the latest technology and this suited the commemoration of the Formula One title. The scuderia's six-speed electro-hydraulic sequential transmission would be one such inclusion. Carbon-ceramic disc brakes, pushrod suspension, traction control and a limited-slip differential would all help to make the Enzo a F1 car with fenders. A 660bhp, V-12 would help to give the car performance like a Formula One car as well. Though impossible to know for sure, it's entirely likely Enzo would have been proud of the creation bearing his name. It was a work of art, inspired from above.

In usual Ferrari fashion, not 350 but 349 would be the announced number of production Enzos. However, perhaps in a moment of weakness, Ferrari would succumb to temptation and would eventually increase the final tally to 399. It wasn't a Dino, but an Enzo. The true Ferrari aficionado had to have the car bearing 'Il Commendatore's' name.

But this is Ferrari. It's Italy. And, if there are two great Italian institutions it would have to be the Catholic church and the Vatican and Scuderia Ferrari.

It would seem as though from the very beginning that Ferraris would be immediately recognizable for their particular engine note. The melody would seem as though played harmoniously in worship of God in the temple. Perhaps it was this reputation for melodious horsepower, and certainly the fact the car bore Enzo's name that Luca do Montezemolo would make the decision to have the production of the Enzo end with an even number.

One more Enzo was to be built. A total of 400 examples of the Enzo would be built with the 400th being a very special one-off gift. Written in di Montezemolo's hand would be the clear directive that this car, ZFFCZ56B000141920 was to be a gift to His Holiness John Paul II.

It's rare that one's chariot can also be an instrument for worship, but this is exactly what Ferrari gifted John Paul II. Fitted with a carbon fiber rear spoiler, Daytona seats and, of course, Rossa Scuderia livery, His Holiness had everything possible to make a journey into God's presence quick and comfortable.

Gifted and well-received by the Pope and the Vatican officials, it was suggested the car be sold and the proceeds from the sale be put to a much more eternal purpose. It was January 2005, and there was great need in Southeast Asia as a result of the terrible tsunami that had ravaged that part of the world.

Pope John Paul II would pass away before the sale would take place but the entire amount earned from the sale would be put into a check that would be given as a blessing to the Pope's successor, Pope Benedict XVI.

The sale saw the car make its way to the United States and has been treated as an object of holiness ever since accumulating just 179 kilometers from the time it was completed and presented to the Pope.

Practically brand new and complete with its original tool kit and original set of manuals, the particular Enzo has been treated as something of a holy relic all its life. Offered as part of RM Sotheby's 2015 Monterey auction, this Enzo has the opportunity to bless its next owner with rich automotive and religious history. Pre-auction estimates suggested a miraculous catch of fish with the prices ranging from between $4,00,000 and $6,000,000. But, this would only seem right for a car many believed to be inspired and blessed from above.

by Jeremy McMullen


In celebration of its continuing domination of Formula 1 and in memory of the Ferrari founder, the super car is called the Ferrari Enzo. It is the ultimate modern day embodiment of the marque's passion for performance, technology and dramatic style.

The Ferrari Enzo Chassis

Never before has the styling of a Ferrari by Pininfarina been so directly derived from its function. The nose section of the Ferrari Enzo is heavily influenced by Formula 1 and the entire body is shaped to ensure optimum airflow for cooling the engine and brakes, while generating unprecedented levels of grip-enhancing downforce with minimal aerodynamic drag.

The under-car ground effects are so efficient that the large rear wing required by many supercars is not needed on a Ferrari Enzo. The aerodynamic balance of the car is maintained at speed by automatic adjustments to the position of twin front flaps and a single rear spoiler.

Generating and Transmitting the Ferrari Power

The Enzo is powered by a new, ultra-light, 6.0-litre V12 engine, which has a number of unique technical features. The performance goals for the engine were very high power – 110 bhp per litre – with generous torque from low revs and a driveable nature. More than 383 lb-ft of torque is generated at 3,000 rpm and variable inlet and exhaust valves, together with electronic management for each row of cylinders and a drive-by-wire throttle, ensures that the engine is extremely responsive.

Like an F1 car, the gearbox in the Enzo is coupled directly to the rear of the engine by a casting that doubles as the engine oil tank. The six-speed gearbox adopts triple cone synchronizers on all ratios to ensure smooth changes, which are entrusted entirely to an electrohydraulic system activated by the driver using paddles behind the steering wheel. A fully automatic option is not offered.

Tailor-Made Cockpit

The new three-spoke, 350 mm diameter steering wheel has a flat-top complete with a row of LEDs indicating engine revs and three controls each side of the air-bag linked to the main car control functions. Grouping essential controls around the steering wheel grip leaves more room for the twin paddles behind the wheel, which operate the electronic gear selection. The view through the wheel is dominated by a central rev-counter, flanked by the 250 mph (400 km/h) speedometer and a graphic screen on which a variety of displays can be called up.

Buyers will be invited to the Ferrari factory to have the cockpit of their car tailored to their specific needs. There will be a choice of four width fittings for both the cushion and backrest of the leather trimmed multi-adjustable Sparco seats. The position of the accelerator and brake pedals can be adjusted fore and aft – and sideways to accommodate drivers who prefer to use left-foot braking

by Ferrari

by Ferrari