conceptcarz.com

1981 Chevrolet Camaro Specifications

These are standard specifications for the 1981 Chevrolet Camaro, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Production Years for Series : 1970 - 1981
Price : $6,800-$8,300
Weight : 3200 lbs | 1451.496 kg
V 6 90-degree
Displacement : 3753 cc | 229.0 cu in. | 3.8 L.
Power : 110 BHP (80.96 KW) @ 4200 RPM
Torque :170 Ft-Lbs (230 NM) @ 2000 RPM
Bore : 3.7 in | 95 mm.
Stroke : 3.5 in | 88 mm.
Compression : 8.6:1
Main Bearings : 4
Construction : Cast-iron block and head
V 6 90-degree
Displacement : 3753 cc | 229.0 cu in. | 3.8 L.
Power : 110 BHP (80.96 KW) @ 4200 RPM
Torque :190 Ft-Lbs (258 NM) @ 2000 RPM
Bore : 3.7 in | 95 mm.
Stroke : 3.5 in | 88 mm.
Compression : 8.6:1
Main Bearings : 4
Valvetrain : 16 OHV (2.66666666666667 valves per cylinder)
Construction : Cast-iron block and head
V 8 | Rochester 2ME two-barrel
Displacement : 4375 cc | 267.0 cu in. | 4.4 L.
Power : 115 HP (84.64 KW) @ 4000 RPM
Torque :200 Ft-Lbs (271 NM) @ 2400 RPM
Bore : 3.5 in | 89 mm.
Stroke : 3.5 in | 88 mm.
Compression : 8.3:1
Main Bearings : 5
Construction : Cast-iron block and head
V 8 | Rochester 4ME four-barrel carb
Displacement : 4998 cc | 305.0 cu in. | 5.0 L.
Power : 150 BHP (110.4 KW) @ 3800 RPM
Torque :240 Ft-Lbs (325 NM) @ 2400 RPM
Bore : 3.7 in | 95 mm.
Stroke : 3.5 in | 88 mm.
Compression : 8.6:1
Main Bearings : 5
Valvetrain : 16 OHV (2 valves per cylinder)
Construction : Cast-iron block and head
Rochester 4-barrel carburetor
V 8 | Rochester 4ME four-barrel carb
Displacement : 4998 cc | 305.0 cu in. | 5.0 L.
Power : 165 BHP (121.44 KW) @ 4000 RPM
Torque :245 Ft-Lbs (332 NM) @ 2400 RPM
Bore : 3.7 in | 95 mm.
Stroke : 3.5 in | 88 mm.
Compression : 8.6:1
Main Bearings : 5
Valvetrain : 16 OHV (2 valves per cylinder)
Construction : Cast-iron block and head
Rochester 4-barrel carburetor
V 8 | Rochester 4ME four-barrel carb
Displacement : 5735 cc | 350.0 cu in. | 5.7 L.
Power : 175 HP (128.8 KW) @ 4000 RPM
Torque :275 Ft-Lbs (373 NM) @ 2400 RPM
Bore : 3.7 in | 95 mm.
Stroke : 3.5 in | 88 mm.
Compression : 8.2:1
Main Bearings : 5
Valvetrain : 16 OHV (2 valves per cylinder)
Construction : Cast-iron block and head
Rochester 4-barrel carburetor
Transmission:
3 Manual , 3 Automatic , 4 Manual

1st Gear : 3.50:1
2nd Gear : 1.89:1
3rd Gear : 1.00:1
Total Chevrolet Production for 1981 : 1,673,093
Total 1981 Camaro production : 126,138
1981 Chevrolet Camaro
Berlinetta Series S Coupe 2 dr. : 20,253
Coupe 2 dr. : 62,614
Z28 Coupe 2 dr. : 43,271

Coupe

Coupe
Coupe
Chassis # 1G1AP87K4BL172614
Auction entries : 1
Fuel Capacity : 21.0 Gal
Doors : 2
Exterior
Length : 197.6 in | 5019 mm.
Width : 74.5 in | 1892 mm.
Height : 49.2 in | 1250 mm.
Wheelbase : 108.0 in | 2743 mm.
Front Track : 61.3 in | 1557 mm.
Rear Track : 60.0 in | 1524 mm.

Berlinetta Series S Coupe

Price : $7,600
Weight : 3300 lbs | 1496.855 kg
Fuel Capacity : 21.0 Gal
Doors : 2
Exterior
Length : 197.6 in | 5019 mm.
Width : 74.5 in | 1892 mm.
Height : 49.2 in | 1250 mm.
Wheelbase : 108.0 in | 2743 mm.
Front Track : 61.3 in | 1557 mm.
Rear Track : 60.0 in | 1524 mm.

Z28 Coupe

Z28 Coupe
Chassis # 1G1AP87LXBL172495
Auction entries : 2
Price : $8,300
Fuel Capacity : 21.0 Gal
Doors : 2
Exterior
Length : 197.6 in | 5019 mm.
Width : 74.5 in | 1892 mm.
Height : 49.2 in | 1250 mm.
Wheelbase : 108.0 in | 2743 mm.
Front Track : 61.3 in | 1557 mm.
Rear Track : 60.0 in | 1524 mm.

Suspension
Front : Control arms, coil springs and stabilizer bars

Rear : Rigid axle, semi-elliptic leaf springs adn stabilizer bar

Steering
Recirculating Ball

Tires / Wheels
Tires : P205/75R14 SBR

Optional Tires
Tires : P225/70R15

Component

EQUIPMENT

Manufacturer

HONEYWELL INTERNATIONAL, INC.

NHTSA Campaign ID07E088000
SummaryCERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
ConsequenceTHIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
RemedyHONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
NotesCUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component

SEAT BELTS:FRONT:RETRACTOR

Manufacturer

GENERAL MOTORS CORP.

Mfr Report Date19800801
NHTSA Campaign ID81V060000
SummaryON CERTAIN VEHICLES, THE SEAT BELT RETRACTORS IN THE REAR SEATING POSITIONS CONTAIN FIRST LOCK POSITIONS WHICH WILL NOT LOCK WHEN USED BY SMALLER PASSENGERS. THIS FAILS TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, 'OCCUPANT CRASH PROTECTION'.
RemedyALL OWNERS WILL BE SENT A PRE-PAID POSTAGE CARD THAT IS TO BE FILLED OUT AND SENT BACK. THE CARD WILL INDICATE WHETHER THE SEAT BELTS ARE FUNCTIONING PROPERLY. IF DEALER INSPECTS SEAT BELTS, THE SEAT BELT RETRACTORS WILL BE REPLACED, IF NECESSARY, WITHOUT CHARGE.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: INTERIOR; SEAT BELT RETRACTORS.CONSEQUENCES OF DEFECT: IN THE EVENT OF A COLLISION, IF PASSENGERS ARE NOTSECURELY RESTRAINED, THE POSSIBILITY OF PERSONAL INJURY AND DEATH WOULD BEINCREASED.

Information provided by NHTSA
Data updated January 2023
1981 Averages
Avg. Household Income : $11,660
Avg. Home : $96,240
Avg. Gallon of Gas : $1.25
Avg. Stamp : $0

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1981 Chevrolet Camaro?
How many 1981 Chevrolet Camaro were produced?
How powerful was the 1981 Chevrolet Camaro? Was the 1981 Chevrolet Camaro popular? Was the 1981 Chevrolet Camaro expensive? What was the fuel economy of the 1981 Chevrolet Camaro?

Q: What is the wheelbase size of the 1981 Chevrolet Camaro? A: The 1981 Chevrolet Camaro has a wheelbase size of 108.00 inches.

Q: What is the length of the 1981 Chevrolet Camaro? A: The 1981 Chevrolet Camaro has a length of 197.60 inches.

Q: What is the width of the 1981 Chevrolet Camaro? A: The 1981 Chevrolet Camaro has a width of 74.50 inches.

Q: How much did the 1981 Chevrolet Camaro cost when new?A: The 1981 Chevrolet Camaro cost approximately $6,800 to $8,300 (USD) when new.

Q: What were the bodystyles of the 1981 Chevrolet Camaro? A: The 1981 Chevrolet Camaro was offered as a Berlinetta Series S Coupe, Coupe, Z28 Coupe.

Q: What tires did the 1981 Chevrolet Camaro have? A: The 1981 Chevrolet Camaro had P205/75R14 SBR tires.

Q: How many vehicles did Chevrolet produce in 1981? A: Chevrolet produced 1,673,093 automobiles in 1981.

Q: How many 1981 Camaros were produced? A: Chevrolet produced 126,138 examples of the Camaro in 1981.

Q: What engines did the 1981 Chevrolet Camaro have? A: The 1981 Chevrolet Camaro had the following engine options: V 6 (3753 cc | 229.0 cu in. | 3.8 L.) with 110 BHP (80.96 KW) @ 4200 RPM and 170 Ft-Lbs (230 NM) @ 2000 RPM
  • V 6 (3753 cc | 229.0 cu in. | 3.8 L.) with 110 BHP (80.96 KW) @ 4200 RPM and 190 Ft-Lbs (258 NM) @ 2000 RPM
  • V 8 (4375 cc | 267.0 cu in. | 4.4 L.) with 115 HP (84.64 KW) @ 4000 RPM and 200 Ft-Lbs (271 NM) @ 2400 RPM
  • V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 150 BHP (110.4 KW) @ 3800 RPM and 240 Ft-Lbs (325 NM) @ 2400 RPM
  • V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 165 BHP (121.44 KW) @ 4000 RPM and 245 Ft-Lbs (332 NM) @ 2400 RPM
  • V 8 (5735 cc | 350.0 cu in. | 5.7 L.) with 175 HP (128.8 KW) @ 4000 RPM and 275 Ft-Lbs (373 NM) @ 2400 RPM
  • Q: What transmissions did the 1981 Chevrolet Camaro have? A: The 1981 Chevrolet Camaro had the following gearbox options: 3 speed Manual, 3 speed Automatic, 4 speed Manual.