conceptcarz.com

1970 Dodge Dart Specifications

These are standard specifications for the 1970 Dodge Dart, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Production Years for Series : 1970 - 1976
Price : $2,465-$2,805
Weight : 2840 lbs | 1288.202 kg
Inline 6
Displacement : 3245 cc | 198.0 cu in. | 3.2 L.
Power : 125 BHP (92 KW) @ 4400 RPM
Bore : 3.4 in | 86 mm.
Stroke : 3.6 in | 92 mm.
Compression : 8.4:1
Main Bearings : 4
Cylinder Block : Cast-iron
1 barrel carburetor
Inline 6
Displacement : 3687 cc | 225.0 cu in. | 3.7 L.
Power : 145 BHP (106.72 KW) @ 4000 RPM
Torque :215 Ft-Lbs (292 NM) @ 2400
Bore : 3.4 in | 87 mm.
Stroke : 4.1 in | 105 mm.
Compression : 8.4:1
Main Bearings : 4
Valvetrain : 12 OHV (2 valves per cylinder)
Cylinder Block : Cast-iron
1 barrel carburetor
V 8
Displacement : 5211 cc | 318.0 cu in. | 5.2 L.
Power : 230 BHP (169.28 KW) @ 4400 RPM
Bore : 3.9 in | 99 mm.
Stroke : 3.3 in | 84 mm.
Compression : 9.0:1
Main Bearings : 5
Cylinder Block : Cast-iron
2-barrel carburetor
V 8
Displacement : 5572 cc | 340.0 cu in. | 5.6 L.
Power : 275 BHP (202.4 KW) @ 5600 RPM
Bore : 4.0 in | 103 mm.
Stroke : 3.3 in | 84 mm.
Compression : 10.0:1
Main Bearings : 5
Cylinder Block : Cast-iron
Carter Thermo-Quad 4-barrel carburetor
Transmission:
3 Manual , 3 Automatic Torque-Flite

Total Dodge Production for 1970 : 543,019
Total 1970 Dart production : 210,104
1970 Dodge Dart
340 Hardtop 2 dr. 6 P : 13,785
Custom Hardtop 2 dr. 6 P : 17,208
Custom Sedan 4 dr. 6 P : 23,779
Sedan 4 dr. 6 P : 35,449
Swinger Hardtop 2 dr. 6 P : 119,883
Component

SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT

Manufacturer

CHRYSLER CORPORATION

NHTSA Campaign ID69V126000
NotesPOSSIBILITY THAT INCORRECT CONTROL ARM BALL JOINT STUD ***** WAS USED IN ERROR.IF THIS CONDITION EXISTS COTTER PIN USED MAY NOT PROPERLY ENGAGE NUT.(CORRECTBY REPLACING ***** WITH ONE OF PROPER THICKNESS.)

Component

SEATS:FRONT ASSEMBLY:RECLINER

Manufacturer

CHRYSLER CORPORATION

NHTSA Campaign ID69V127000
NotesPOSSIBILITY THAT LEFT HAND SEAT BACK LATCH MAY FAIL TO LOCK AFTER REPEATEDLATCHINGS.IF THIS CONDITION EXISTS SEAT LOCK WILL NOT MEET MOTOR VEHICLESAFETY STANDARD NO.207.(CORRECT BY INSTALLING NEW IMPROVED SEAT BACK LATCH.)

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS

Manufacturer

CHRYSLER CORPORATION

NHTSA Campaign ID70V129000
NotesPOSSIBILITY THAT UNMATCHED PRIMARY FRONT BRAKE LININGS WERE INSTALLED DURINGPRODUCTION.DIFFERENT CO- EFFICIENTS OF FRICTION BETWEEN UN- MATCHED BRAKELININGS COULD RESULT IN BRAKE 'PULL' TO LEFT OR RIGHT WHEN BRAKES ARE APPLIED.(CORRECT BY REPLACING LININGS WHERE NECES- SARY.)

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Manufacturer

CHRYSLER CORPORATION

NHTSA Campaign ID70V048000
NotesPOSSIBILITY THAT FRONT PORTION OF BRAKE MASTER CYLINDER WAS DAM- AGED ORIMPROPERLY ASSEMBLED IN PRODUCTION.ALSO POSSIBLE THAT PRIMARY CUP IN FRONTBRAKE PORTION MAY HAVE BEEN CUT, OR A THIN WASHER BETWEEN CUP AND PISTON MAYHAVE BEEN OMITTED.IF EITHER OF THESE CONDITIONS EXIST FRONT BRAKES MAY FAIL;HOWEVER, REAR BRAKES WILL STILL BE OPERATIONAL.(CORRECT BY REPLACINGCYLINDERS WHERE NECESSARY.)

Information provided by NHTSA
Data updated January 2023
1970 Averages
Avg. Car Cost : $3,900
Avg. Household Income : $9,350
Avg. Home : $23,000
Avg. Gallon of Gas : $0.36
Total Car Production : 8,283,949

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1970 Dodge Dart?
How many 1970 Dodge Dart were produced?
How powerful was the 1970 Dodge Dart? Was the 1970 Dodge Dart popular? Was the 1970 Dodge Dart expensive? What was the fuel economy of the 1970 Dodge Dart?

Q: What is the wheelbase size of the 1970 Dodge Dart? A: The 1970 Dodge Dart has a wheelbase size of 111.00 inches.

Q: What is the length of the 1970 Dodge Dart? A: The 1970 Dodge Dart has a length of 197.00 inches.

Q: How much did the 1970 Dodge Dart cost when new?A: The 1970 Dodge Dart cost approximately $2,465 to $2,805 (USD) when new.

Q: What were the bodystyles of the 1970 Dodge Dart? A: The 1970 Dodge Dart was offered as a 340 Hardtop, Custom Hardtop, Custom Sedan, Sedan, Swinger Hardtop.

Q: How many vehicles did Dodge produce in 1970? A: Dodge produced 543,019 automobiles in 1970.

Q: How many 1970 Darts were produced? A: Dodge produced 210,104 examples of the Dart in 1970.

Q: What engines did the 1970 Dodge Dart have? A: The 1970 Dodge Dart had the following engine options: Inline 6 (3245 cc | 198.0 cu in. | 3.2 L.) with 125 BHP (92 KW) @ 4400 RPM
  • Inline 6 (3687 cc | 225.0 cu in. | 3.7 L.) with 145 BHP (106.72 KW) @ 4000 RPM and 215 Ft-Lbs (292 NM) @ 2400
  • V 8 (5211 cc | 318.0 cu in. | 5.2 L.) with 230 BHP (169.28 KW) @ 4400 RPM
  • V 8 (5572 cc | 340.0 cu in. | 5.6 L.) with 275 BHP (202.4 KW) @ 5600 RPM
  • Q: What transmissions did the 1970 Dodge Dart have? A: The 1970 Dodge Dart had the following gearbox options: 3 speed Manual, 3 speed Automatic Torque-Flite.