These are standard specifications for the 1975 Alfa Romeo Alfetta, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
5 Manual Rear mounted
Information provided by NHTSA
Data updated June 2024
Features
Engine Location : | Front |
Drive Type : | Rear Wheel |
Body / Chassis : | Steel unibody |
Production Years for Series : | 1972 - 1984 |
Body Designer : | Giorgetto Giugiaro |
Price : | $6,995-$8,195 |
Weight : | 2310 lbs | 1047.798 kg |
MPG Highway : | 25 |
Performance
0-60 mph : | 12.5 seconds. |
1/4 Mile : | 18.3 seconds. |
Engine & Transmission
Inline 4 | |
---|---|
Displacement : | 1962 cc | 119.7 cu in. | 2.0 L. |
Power : | 110 HP (80.96 KW) |
Torque : | 110 Ft-Lbs (149 NM) @ 4500 RPM |
Bore : | 3.3 in | 84 mm. |
Stroke : | 3.5 in | 88 mm. |
Compression : | 9.0:1 |
Main Bearings : | 5 |
Construction : | Aluminum block and head |
Spica mechanical fuel injection |
5 Manual Rear mounted
Production Figures
Total Alfa Romeo Production for 1975 : | 189,682 |
1975 Alfa Romeo Alfetta |
Handling
Recall
Component | SEAT BELTS:FRONT:RETRACTOR |
---|---|
Manufacturer | ALFA ROMEO, INCORPORATED |
NHTSA Campaign ID | 76V043000 |
Notes | ALFA ROMEO CAMPAIGN NO 083450.COUPES AND SEDANS.POSSIBILITY OF IMPROPERINSTALLATION OF FRONT OUTBOARD SEAT BELT RETRACTOR.IF THIS CONDITION EXISTSTHE SEAT BELT RETRACTING MECHANSIM MAY NOT LOCK UP THE SHOULDERHARNESS.INSUCH CASES AND IN THE EVENT OF A COLLISION, THE SEATHS OCCUPANT COULD BESUBJECT TO BODILY INJURY UPON IMPACT.(CORRECT BY INSPECTING AND REPLACINGBELTS AND MOUNTING). |
Component | FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP |
---|---|
Manufacturer | ALFA ROMEO, INCORPORATED |
NHTSA Campaign ID | 76V001000 |
Notes | ALFA ROMEO CAMPAIGN NO 11-10.POSSIBILITY THAT THE CLAMPS USED ON HOSECONNECTING THE FUEL FILLER NECK TO FUEL TANK, LOCATED IN THE LUGGAGECOMPARTMENT, MAY HAVE BEEN INSUFFICENTLY TIGHTENED DURING ASSEMBLY.IF THISCONDITION EXISTS, FUEL LEAKAGE COULD OCCUR INTO THE LUGGAGE COMPARTMENT.(CORRECT BY INSPECTING AND REPLACING CLAMPS WITH WORM TYPE CLAMPS). |
Component | STEERING:RACK AND PINION |
---|---|
Manufacturer | ALFA ROMEO, INCORPORATED |
NHTSA Campaign ID | 77V038000 |
Summary | THE BOLTS WHICH SECURE THE STEERING RACK ASSEMBLY TO THE CHASSIS MAY NOT HAVE BEEN PROPERLY TIGHTENED AND AS A RESULT MAY BECOME LOOSE. AN INCREASING AMOUNT OF STEERING WHEEL PLAY MAY DEVELOP. |
Remedy | THE DEALER WILL TIGHTEN ALL LOOSE BOLTS TO SPECIFICATIONS, FREE OF CHARGE. |
Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: STEERING; STEERING RACK ATTACHING BOLTS.CONSEQUENCES OF DEFECT: LOSS OF STEERING CONTROL COULD RESULT IN LOSS OFVEHICLE CONTROL AND AN ACCIDENT.NOTE: AN AUDIBLE CLUNKING SOUND MAY BE HEARD ON LEFT OR RIGHT HAND TURNS,SIGNIFYING LOOSE BOLTS. |
Data updated June 2024
1975 Averages
Avg. Car Cost : | $4,250 |
Avg. Household Income : | $14,100 |
Avg. Home : | $39,300 |
Avg. Gallon of Gas : | $0.44 |
1975 Alfa Romeo Alfetta FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1975 Alfa Romeo Alfetta?
Q: What is the wheelbase size of the 1975 Alfa Romeo Alfetta? A: The 1975 Alfa Romeo Alfetta has wheelbase sizes of 94.50 and 98.80 inches.Q: What is the length of the 1975 Alfa Romeo Alfetta? A: The 1975 Alfa Romeo Alfetta has lengths of 165.00 and 168.00 inches.Q: What is the width of the 1975 Alfa Romeo Alfetta? A: The 1975 Alfa Romeo Alfetta has width of 65.50 and 65.80 inches.Q: How much did the 1975 Alfa Romeo Alfetta cost when new?A: The 1975 Alfa Romeo Alfetta cost approximately $6,995 to $8,195 (USD) when new.Q: What were the bodystyles of the 1975 Alfa Romeo Alfetta? A: The 1975 Alfa Romeo Alfetta was offered as a Coupe, Sedan.Q: How many vehicles did Alfa Romeo produce in 1975? A: Alfa Romeo produced 189,682 automobiles in 1975.Q: What engine did the 1975 Alfa Romeo Alfetta have? A: The engine powering the 1975 Alfa Romeo Alfetta was a Inline 4 (1962 cc | 119.7 cu in. | 2.0 L.) with 110 HP (80.96 KW) and 110 Ft-Lbs (149 NM) @ 4500 RPM. Q: What transmission did the 1975 Alfa Romeo Alfetta have? A: The 1975 Alfa Romeo Alfetta had a 5 speed Manual Rear mounted gearbox.
What are the dimension and mechanical specifications of the 1975 Alfa Romeo Alfetta?
How many 1975 Alfa Romeo Alfetta were produced?
How powerful was the 1975 Alfa Romeo Alfetta? Was the 1975 Alfa Romeo Alfetta popular? Was the 1975 Alfa Romeo Alfetta expensive? What was the fuel economy of the 1975 Alfa Romeo Alfetta?
Q: What is the wheelbase size of the 1975 Alfa Romeo Alfetta? A: The 1975 Alfa Romeo Alfetta has wheelbase sizes of 94.50 and 98.80 inches.Q: What is the length of the 1975 Alfa Romeo Alfetta? A: The 1975 Alfa Romeo Alfetta has lengths of 165.00 and 168.00 inches.Q: What is the width of the 1975 Alfa Romeo Alfetta? A: The 1975 Alfa Romeo Alfetta has width of 65.50 and 65.80 inches.Q: How much did the 1975 Alfa Romeo Alfetta cost when new?A: The 1975 Alfa Romeo Alfetta cost approximately $6,995 to $8,195 (USD) when new.Q: What were the bodystyles of the 1975 Alfa Romeo Alfetta? A: The 1975 Alfa Romeo Alfetta was offered as a Coupe, Sedan.Q: How many vehicles did Alfa Romeo produce in 1975? A: Alfa Romeo produced 189,682 automobiles in 1975.Q: What engine did the 1975 Alfa Romeo Alfetta have? A: The engine powering the 1975 Alfa Romeo Alfetta was a Inline 4 (1962 cc | 119.7 cu in. | 2.0 L.) with 110 HP (80.96 KW) and 110 Ft-Lbs (149 NM) @ 4500 RPM. Q: What transmission did the 1975 Alfa Romeo Alfetta have? A: The 1975 Alfa Romeo Alfetta had a 5 speed Manual Rear mounted gearbox. Alfa Romeo
Similarly Sized Vehicles
from 1975
Alfa Romeo Monthly Sales Volume
March 2023
2,390