1974 Chevrolet Monte Carlo Recalls

1974 Chevrolet Monte Carlo
1974 Chevrolet Monte Carlo Navigation
  • Article
  • Image gallery
  • Valuation
  • Specifications
  • Recalls
    • Component

    EQUIPMENT

    Manufacturer

    HONEYWELL INTERNATIONAL, INC.

    NHTSA Campaign ID07E088000
    SummaryCERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
    ConsequenceTHIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
    RemedyHONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
    NotesCUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

    Component

    SEAT BELTS:FRONT:RETRACTOR

    Manufacturer

    GENERAL MOTORS CORP.

    NHTSA Campaign ID74V016000
    NotesGENERAL MOTORS CAMPAIGN NO 74-C-10.OLDSMOBILE CAMPAIGN NO 74-C-4.BUICKCAMPAIGN NO 74-C-3.PONTIAC CAMPAIGN NO 74-C-4.POSSIBILITY THAT THE FRONTSEAT LAP-BELT RETRACTOR MAY INTERMITTENTLY FAIL TO LOCK THE SEAT LAP-BELTWEBBING DUE TO WEAK LOCKING BAR SPRING.AS A RESULT, THE RETRACTOR MAY FAIL TOHOLD THE BELT IN POSITION DURING EXTREMELY HARD BRAKING ACTION OR UNDERACCIDENT CONDITIONS.THIS MAY CAUSE THE OCCUPANT TO SLIDE FORWARD ON THE SEATAND INCREASE THE POSSIBILITY OF INJURY.(CORRECT BY INSPECTING AND INSTALLINGNEW ASSIST SPRING WHERE NECESSARY.)

    Component

    SUSPENSION:FRONT:CONTROL ARM:UPPER ARM

    Manufacturer

    GENERAL MOTORS CORP.

    Mfr Report Date19730801
    NHTSA Campaign ID73V250000
    NotesCHEVROLET CAMPAIGN NO 74-C-09.PONTIAC 74-C-2.BUICK 74-C-2.OLDSMOBILE74-C-3.SPRINT 74-C-4.POSSIBILITY THAT THE FRONT UPPER CONTROL ARM INNERBUSHING RETAINER NUTS MAY LOOSEN AND COME OFF DURING NORMAL OPERATINGCONDITIONS.SHOULD THIS OCCUR, THE LOOSE CONTROL ARM MAY MOVE FORWARD ANDCONTACT THE UPPER CONTROL ARM MOUNTING BRACKET ON THE FRAME WHICH RESTRICTS ANYFURTHER FORWARD MOVEMENT.IF THIS VEHICLE IS OPERATED IN THIS CONDITION IT ISPOSSIBLE FOR THE CONTROL ARM CROSS SHAFT TO BREAK.(CORRECT BY INSPECTING ANDINSTALLING NEW BUSHING RETAINERS WHERE NECESSARY.)

    Information provided by NHTSA
    Data updated June 2024

    Q: Does the 1974 Chevrolet Monte Carlo have any vehicle recalls?
    A: Yes, the 1974 Chevrolet Monte Carlo has atleast 3 recalls.

    Q: What are the 1974 Chevrolet Monte Carlo recalls?
    A: The 1974 Chevrolet Monte Carlo recalls include: EQUIPMENT, SEAT BELTS:FRONT:RETRACTOR, SUSPENSION:FRONT:CONTROL ARM:UPPER ARM

    .

    Vehicle information, history, and specifications from concept to production.