1977 Ford Bronco Navigation
Features
Engine Location : | Front |
Drive Type : | 4WD |
Body / Chassis : | Ladder frame |
Production Years for Series : | 1966 - 1977 |
Price : | $2,194 |
Engine & Transmission
V 8 | |
---|---|
Displacement : | 4949 cc | 302.0 cu in. | 5.0 L. |
Power : | 130 BHP (95.68 KW) @ 3400 RPM |
Torque : | 243 Ft-Lbs (329 NM) @ 1600 |
Bore : | 4.0 in | 102 mm. |
Stroke : | 3.0 in | 76 mm. |
Compression : | 8.4:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Motorcraft 2-barrel 2150 carburetor |
Manual
Production Figures
Total Ford Production for 1977 : | 1,840,427 |
1977 Ford Bronco |
Handling
Recall
Component | FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
---|---|
Manufacturer | FEDERAL-MOGUL CORPORATION |
NHTSA Campaign ID | 07E064000 |
Summary | CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK. |
Consequence | A LEAKING FUEL PUMP COULD CREATE A VEHICLE FIRE HAZARD. |
Remedy | FEDERAL-MOGUL WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMPS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 15, 2007. OWNERS CAN CONTACT FEDERAL-MOGUL AT 248-354-7700. |
Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET CARTER, NAPA, ACCUFLOW, TRU FLOW, PARTS MASTER, AND PARTS DEPOT BRAND FUEL PUMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED MOTOR VEHICLES.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
Component | EQUIPMENT:OTHER:LABELS |
---|---|
Manufacturer | FORD MOTOR COMPANY |
Mfr Report Date | 19760901 |
NHTSA Campaign ID | 76V190000 |
Notes | MODEL E AND F SERIES LIGHT TRUCKS AND BRONCOS.VEHICLES FAIL TO CONFORM WITHAXLE WEIGHT RATINGS SPECIFIED IN S5.1.2 OF FEDERAL MOTOR VEHICLE SAFETYSTANDARD NO.120.(CORRECT BY INSPECTING AND REPLACING SAFETY CERTIFICATIONLABEL TO MEET REQUIREMENT OF FMVSS NO.120).LIGHT TRUCK - PICK-UP. |
Data updated June 2024
1977 Averages
Avg. Household Income : | $15,000 |
Avg. Home : | $49,300 |
Avg. Gallon of Gas : | $0.65 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1977 Ford Bronco?
Q: What is the wheelbase size of the 1977 Ford Bronco? A: The 1977 Ford Bronco has a wheelbase size of 92.00 inches.Q: What is the width of the 1977 Ford Bronco? A: The 1977 Ford Bronco has a width of 79.30 inches.Q: How much did the 1977 Ford Bronco cost when new?A: The 1977 Ford Bronco had a base price of approximately $2,194 (USD).Q: What is the bodystyle of the 1977 Ford Bronco? A: The 1977 Ford Bronco was a .Q: How many vehicles did Ford produce in 1977? A: Ford produced 1,840,427 automobiles in 1977.Q: What engine did the 1977 Ford Bronco have? A: The engine powering the 1977 Ford Bronco was a V 8 (4949 cc | 302.0 cu in. | 5.0 L.) with 130 BHP (95.68 KW) @ 3400 RPM and 243 Ft-Lbs (329 NM) @ 1600. Q: What transmission did the 1977 Ford Bronco have? A: The 1977 Ford Bronco had a Manual gearbox.
What are the dimension and mechanical specifications of the 1977 Ford Bronco?
How many 1977 Ford Bronco were produced?
How powerful was the 1977 Ford Bronco? Was the 1977 Ford Bronco popular? Was the 1977 Ford Bronco expensive? What was the fuel economy of the 1977 Ford Bronco?
Q: What is the wheelbase size of the 1977 Ford Bronco? A: The 1977 Ford Bronco has a wheelbase size of 92.00 inches.Q: What is the width of the 1977 Ford Bronco? A: The 1977 Ford Bronco has a width of 79.30 inches.Q: How much did the 1977 Ford Bronco cost when new?A: The 1977 Ford Bronco had a base price of approximately $2,194 (USD).Q: What is the bodystyle of the 1977 Ford Bronco? A: The 1977 Ford Bronco was a .Q: How many vehicles did Ford produce in 1977? A: Ford produced 1,840,427 automobiles in 1977.Q: What engine did the 1977 Ford Bronco have? A: The engine powering the 1977 Ford Bronco was a V 8 (4949 cc | 302.0 cu in. | 5.0 L.) with 130 BHP (95.68 KW) @ 3400 RPM and 243 Ft-Lbs (329 NM) @ 1600. Q: What transmission did the 1977 Ford Bronco have? A: The 1977 Ford Bronco had a Manual gearbox. - 1977 Ford Bronco Menu
- Article
- Image gallery
- Valuation
- Specifications
- Profiles
- Recalls