2007 GMC Canyon Navigation
Features
Engine Location : | Front |
Drive Type : | Rear Wheel (standard), 4WD |
Production Years for Series : | 2004 - 2014 |
Weight : | 3375 lbs | 1530.874 kg |
MPG City : | 17 |
MPG Highway : | 24 |
Engine & Transmission
Inline 4 | |
---|---|
Displacement : | 2900 cc | 177.0 cu in. | 2.9 L. |
Power : | 185 HP (136.16 KW) @ 5600 RPM |
Torque : | 190 Ft-Lbs (258 NM) @ 2800 RPM |
Bore : | 3.8 in | 96 mm. |
Stroke : | 4.0 in | 102 mm. |
Compression : | 10:1 |
Valvetrain : | 16 DOHC (4.0 valves per cylinder) |
Construction : | Cast-Aluminum block and head |
Multi-point Sequential Fuel Injection | |
Redline : | 6300 RPM |
Ignition system : | Coil-on-plug, platinum-tipped spark plugs |
Inline 5 | |
---|---|
Displacement : | 3700 cc | 225.8 cu in. | 3.7 L. |
Power : | 242 HP (178.112 KW) @ 5600 RPM |
Torque : | 242 Ft-Lbs (328 NM) @ 2800 RPM |
Bore : | 3.8 in | 96 mm. |
Stroke : | 4.0 in | 102 mm. |
Compression : | 10:1 |
Valvetrain : | 20 DOHC (4.0 valves per cylinder) |
Construction : | Cast-Aluminum block and head |
Multi-point Sequential Fuel Injection | |
Redline : | 6300 RPM |
Ignition system : | Coil-on-plug, platinum-tipped spark plugs |
4 Automatic Hydra-Matic 4L60 , 5 Manual MA5
Gear Ratios
1st Gear : | 3.75 |
2nd Gear : | 2.26 |
3rd Gear : | 1.37 |
4th Gear : | 1.00 |
5th Gear : | 0.73 |
Handling
Recall
Component | WHEELS:RIM |
---|---|
Manufacturer | GENERAL MOTORS CORP. |
Mfr Report Date | 20060401 |
NHTSA Campaign ID | 06V307000 |
Summary | CERTAIN SPORT UTILITY VEHICLES AND TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, 'TIRE SELECTION AND RIMS.' THESE VEHICLES HAVE AN INCOMPLETE TIRE RIM DESIGNATION ON THE CERTIFICATION/TIRE LABEL LOCATED ON THE DRIVER'S DOOR EDGE. IN ADDITION, THE LABEL MAY ALSO BE MISSING THE TIRE LOAD RATING ON THE LABEL. ALTHOUGH THIS INFORMATION IS NOT REQUIRED BY THE STANDARD, IF A TIRE OF A LESSER LOAD RATING IS INSTALLED, THE TIRE MAY NOT BE ABLE TO SUSTAIN THE LOADS ENCOUNTERED DURING USE. |
Consequence | IF A CUSTOMER REPLACES A WHEEL AND ONLY RELIES ON THE RIM SIZE DESIGNATION THAT IS INDICATED ON THE LABEL, A WHEEL THAT IS OF A DIFFERENT RIM CONTOUR DESIGNATION MAY BE INSTALLED. IT MAY BE DIFFICULT OR IMPOSSIBLE TO MOUNT THE TIRE ON A WHEEL WITH THE WRONG CONTOUR. IF THE TIRE IS MOUNTED ON THE WHEEL WITH THE WRONG CONTOUR, THE WHEEL AND TIRE MAY NOT PERFORM AS INTENDED, WHICH COULD INCREASE THE RISK OF A CRASH. |
Remedy | A LABEL THAT WILL CORRECT THE LABEL ORIGINALLY INSTALLED WILL BE MAILED TO CONSUMERS ALONG WITH INSTALLATION INSTRUCTIONS. THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL. THE RECALL BEGAON ON NOVEMBER 7, 2006. OWNERS SHOULD CONTACT CADILLAC AT 1-866-982-2239, CHEVROLET AT 1-800-630-2438, AND GMC TRUCKS AT 1-866-996-9463. |
Notes | GM RECALL NO. 06079.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO SAFERCAR.GOV. |
Data updated June 2024
2007 Averages
Avg. Household Income : | $50,823 |
Avg. Home : | $313,600 |
Avg. Gallon of Gas : | $3.38 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 2007 GMC Canyon?
Q: What is the wheelbase size of the 2007 GMC Canyon? A: The 2007 GMC Canyon has wheelbase sizes of 111.30 and 126.00 inches.Q: What is the length of the 2007 GMC Canyon? A: The 2007 GMC Canyon has lengths of 192.40 and 207.10 inches.Q: What is the width of the 2007 GMC Canyon? A: The 2007 GMC Canyon has a width of 67.60 inches.Q: How much headroom does the 2007 GMC Canyon have?A: The 2007 GMC Canyon has 39.30- to 39.60-inches of headroom.Q: How much legroom does the 2007 GMC Canyon have?A: The 2007 GMC Canyon has legroom of 44.00 inches.Q: What were the bodystyles of the 2007 GMC Canyon? A: The 2007 GMC Canyon was offered as a Crew Cab, Extended Cab, Truck.Q: What engines did the 2007 GMC Canyon have? A: The 2007 GMC Canyon had the following engine options: Inline 4 (2900 cc | 177.0 cu in. | 2.9 L.) with 185 HP (136.16 KW) @ 5600 RPM and 190 Ft-Lbs (258 NM) @ 2800 RPM Inline 5 (3700 cc | 225.8 cu in. | 3.7 L.) with 242 HP (178.112 KW) @ 5600 RPM and 242 Ft-Lbs (328 NM) @ 2800 RPM Q: What transmissions did the 2007 GMC Canyon have? A: The 2007 GMC Canyon had the following gearbox options: 4 speed Automatic Hydra-Matic 4L60, 5 speed Manual MA5.
What are the dimension and mechanical specifications of the 2007 GMC Canyon?
How many 2007 GMC Canyon were produced?
How powerful was the 2007 GMC Canyon? Was the 2007 GMC Canyon popular? Was the 2007 GMC Canyon expensive? What was the fuel economy of the 2007 GMC Canyon?
Q: What is the wheelbase size of the 2007 GMC Canyon? A: The 2007 GMC Canyon has wheelbase sizes of 111.30 and 126.00 inches.Q: What is the length of the 2007 GMC Canyon? A: The 2007 GMC Canyon has lengths of 192.40 and 207.10 inches.Q: What is the width of the 2007 GMC Canyon? A: The 2007 GMC Canyon has a width of 67.60 inches.Q: How much headroom does the 2007 GMC Canyon have?A: The 2007 GMC Canyon has 39.30- to 39.60-inches of headroom.Q: How much legroom does the 2007 GMC Canyon have?A: The 2007 GMC Canyon has legroom of 44.00 inches.Q: What were the bodystyles of the 2007 GMC Canyon? A: The 2007 GMC Canyon was offered as a Crew Cab, Extended Cab, Truck.Q: What engines did the 2007 GMC Canyon have? A: The 2007 GMC Canyon had the following engine options: Inline 4 (2900 cc | 177.0 cu in. | 2.9 L.) with 185 HP (136.16 KW) @ 5600 RPM and 190 Ft-Lbs (258 NM) @ 2800 RPM- 2007 GMC Canyon Menu
- Article
- Image gallery
- Specifications
- Recalls