These are standard specifications for the 1992 Mitsubishi Eclipse, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
5 Manual , 4 Automatic
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Front Wheel (standard), AWD |
| Body / Chassis : | Steel unibody |
| Production Years for Series : | 1990 - 1994 |
| Price : | $10,860-$16,800 |
| Weight : | 2680 lbs | 1215.628 kg |
| MPG City : | 20 |
| MPG Highway : | 25 |
Performance
| 0-60 mph : | 7 seconds. |
| 1/4 Mile : | 15.3 seconds. |
Engine & Transmission
| Inline 4 | |
|---|---|
| Displacement : | 1775 cc | 108.3 cu in. | 1.8 L. |
| Power : | 92 HP (67.712 KW) @ 5500 RPM |
| Torque : | 105 Ft-Lbs (142 NM) @ 3500 RPM |
| Bore : | 80.6 mm | 3.173 in. |
| Stroke : | 86.0 mm | 3.386 in. |
| Compression : | 9.0:1 |
| Valvetrain : | 8 OHC (2 valves per cylinder) |
| Multi-port Electronic Fuel Injection | |
| Inline 4 | |
|---|---|
| Displacement : | 1997 cc | 121.9 cu in. | 2.0 L. |
| Power : | 135 HP (99.36 KW) @ 6000 RPM |
| Torque : | 125 Ft-Lbs (169 NM) @ 3000 RPM |
| Bore : | 85.0 mm | 3.346 in. |
| Stroke : | 88.0 mm | 3.465 in. |
| Compression : | 9.0:1 |
| Valvetrain : | 16 DOHC (4 valves per cylinder) |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Light Alloy |
| Turbocharged Inline 4 | |
|---|---|
| Displacement : | 1997 cc | 121.9 cu in. | 2.0 L. |
| Power : | 195 BHP (143.52 KW) @ 6000 RPM |
| Torque : | 203 Ft-Lbs (275 NM) @ 3000 RPM |
| Bore : | 3.4 in | 85 mm. |
| Stroke : | 3.5 in | 88 mm. |
| Compression : | 8.0:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Light Alloy |
| Ignition system : | multi-point fuel inject |
5 Manual , 4 Automatic
Production Figures
| Total Mitsubishi Production for 1992 : | 155,580 |
| 1992 Mitsubishi Eclipse | |
Handling
Recall
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | PRO-A MOTORS, INC. |
| NHTSA Campaign ID | 06E026000 |
| Summary | CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. |
| Remedy | PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988. |
| Notes | THIS RECALL ONLY PERTAINS TO PRO-A MOTORS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION |
|---|---|
| Manufacturer | MITSUBISHI AMERICA |
| Mfr Report Date | 19890515 |
| NHTSA Campaign ID | 98V069001 |
| Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. LOCKUP OF THE TRANSFER CASE CAN OCCUR DUE TO INSUFFICIENT LUBRICATION. |
| Consequence | THIS CONDITION CAN CAUSE A LOSS OF VEHICLE CONTROL, INCREASING THE RISK OF A CRASH. |
| Remedy | DEALERS WILL INSPECT THE VEHICLES FOR ADEQUACY OF THE TRANSFER CASE OIL VOLUME, TRANSFER CASE OIL LEAKAGE, AND OPERATIONAL DEGRADATION OF THE TRANSFER CASE MECHANISM. IF OIL VOLUME IS INSUFFICIENT, THE APPROPRIATE AMOUNT OF OIL WILL BE ADDED. IF THERE IS TRANSFER CASE OIL LEAKAGE, AFFECTED COMPONENTS WILL BE REPLACED. IF THE TRANSFER CASE SHOWS OPERATIONAL DEGRADATION, THE TRANSFER CASE WILL BE REPLACED. |
| Notes | OWNER NOTIFICATION IS EXPECTED TO BEGIN APRIL 20, 1998.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MITSUBISHI AT 1-800-222-0037.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Data updated January 2023
1992 Averages
| Avg. Car Cost : | $16,950 |
| Avg. Household Income : | $30,030 |
| Avg. Home : | $122,500 |
| Avg. Gallon of Gas : | $1.05 |
1992 Mitsubishi Eclipse FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1992 Mitsubishi Eclipse?
Q: What is the wheelbase size of the 1992 Mitsubishi Eclipse? A: The 1992 Mitsubishi Eclipse has a wheelbase size of 97.20 inches.Q: What is the length of the 1992 Mitsubishi Eclipse? A: The 1992 Mitsubishi Eclipse has a length of 172.80 inches.Q: What is the width of the 1992 Mitsubishi Eclipse? A: The 1992 Mitsubishi Eclipse has a width of 66.70 inches.Q: How much did the 1992 Mitsubishi Eclipse cost when new?A: The 1992 Mitsubishi Eclipse cost approximately $10,860 to $16,800 (USD) when new.Q: What is the bodystyle of the 1992 Mitsubishi Eclipse? A: The 1992 Mitsubishi Eclipse was a Coupe.Q: How many vehicles did Mitsubishi produce in 1992? A: Mitsubishi produced 155,580 automobiles in 1992.Q: What engines did the 1992 Mitsubishi Eclipse have? A: The 1992 Mitsubishi Eclipse had the following engine options: Inline 4 (1775 cc | 108.3 cu in. | 1.8 L.) with 92 HP (67.712 KW) @ 5500 RPM and 105 Ft-Lbs (142 NM) @ 3500 RPM Inline 4 (1997 cc | 121.9 cu in. | 2.0 L.) with 135 HP (99.36 KW) @ 6000 RPM and 125 Ft-Lbs (169 NM) @ 3000 RPM Turbocharged Inline 4 (1997 cc | 121.9 cu in. | 2.0 L.) with 195 BHP (143.52 KW) @ 6000 RPM and 203 Ft-Lbs (275 NM) @ 3000 RPM Q: What transmissions did the 1992 Mitsubishi Eclipse have? A: The 1992 Mitsubishi Eclipse had the following gearbox options: 5 speed Manual, 4 speed Automatic.