1977 Dodge Monaco Navigation
Features
Engine Location : | Front |
Drive Type : | Rear Wheel |
Body / Chassis : | Unibody |
Production Years for Series : | 1965 - 1978 |
Price : | $3,910-$5,365 |
Weight : | 3635 lbs | 1648.808 kg |
Engine & Transmission
Inline 6 | Slant six | |
---|---|
Displacement : | 3687 cc | 225.0 cu in. | 3.7 L. |
Power : | 110 HP (80.96 KW) @ 3600 RPM |
Torque : | 180 Ft-Lbs (244 NM) @ 2000 RPM |
Bore : | 3.4 in | 86 mm. |
Stroke : | 4.1 in | 105 mm. |
Compression : | 8.4:1 |
Main Bearings : | 4 |
Construction : | Cast-iron block and head |
Carter 2-barrel WA-1 |
V 8 90-degree | Carter 2-Barrel BBD 8093 or 8094S carburetor | |
---|---|
Displacement : | 5211 cc | 318.0 cu in. | 5.2 L. |
Power : | 145 HP (106.72 KW) @ 4000 RPM |
Torque : | 245 Ft-Lbs (332 NM) @ 1600 RPM |
Bore : | 3.9 in | 99 mm. |
Stroke : | 3.3 in | 84 mm. |
Compression : | 8.5:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Carter 2-barrel carburetor |
V 8 | |
---|---|
Displacement : | 5899 cc | 360.0 cu in. | 5.9 L. |
Power : | 155 HP (114.08 KW) @ 3600 RPM |
Torque : | 275 Ft-Lbs (373 NM) @ 2000 RPM |
Bore : | 4.0 in | 102 mm. |
Stroke : | 3.6 in | 91 mm. |
Compression : | 8.4:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Holley 2-barrel carburetor |
V 8 90-degree | Carter 2-Barrel | |
---|---|
Displacement : | 5899 cc | 360.0 cu in. | 5.9 L. |
Power : | 175 HP (128.8 KW) @ 4000 RPM |
Torque : | 275 Ft-Lbs (373 NM) @ 2000 RPM |
Bore : | 4.0 in | 102 mm. |
Stroke : | 3.6 in | 91 mm. |
Compression : | 8.4:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Carter 4-barrel carburetor |
V 8 90-degree | |
---|---|
Displacement : | 6555 cc | 400.0 cu in. | 6.6 L. |
Power : | 190 HP (139.84 KW) @ 3600 RPM |
Torque : | 305 Ft-Lbs (414 NM) @ 3200 RPM |
Bore : | 4.3 in | 110 mm. |
Stroke : | 3.4 in | 86 mm. |
Compression : | 8.2:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Holley 4-barrel carburetor |
V 8 90-degree | Carter 4-Barrel | |
---|---|
Displacement : | 7210 cc | 440.0 cu in. | 7.2 L. |
Power : | 195 HP (143.52 KW) @ 3600 RPM |
Torque : | 320 Ft-Lbs (434 NM) @ 2000 RPM |
Bore : | 4.3 in | 110 mm. |
Stroke : | 3.8 in | 95 mm. |
Compression : | 8.2:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Carter 4-barrel carburetor |
V 8 90-degree | Carter 4-Barrel | |
---|---|
Displacement : | 6555 cc | 400.0 cu in. | 6.6 L. |
Power : | 210 HP (154.56 KW) @ 4400 RPM |
Torque : | 305 Ft-Lbs (414 NM) @ 3200 RPM |
Bore : | 4.3 in | 110 mm. |
Stroke : | 3.4 in | 86 mm. |
Compression : | 8.2:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
1 4-barrel carburetor |
V 8 90-degree | Carter 2-Barrel | |
---|---|
Displacement : | 6555 cc | 400.0 cu in. | 6.6 L. |
Power : | 240 HP (176.64 KW) @ 4400 RPM |
Torque : | 325 Ft-Lbs (441 NM) @ 3200 RPM |
Bore : | 4.3 in | 110 mm. |
Stroke : | 3.4 in | 86 mm. |
Compression : | 8.2:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Carter carburetor |
3 Manual Column shift , 3 Automatic Torque-Flite
Gear Ratios
1st Gear : | 3.08:1 |
2nd Gear : | 1.70:1 |
3rd Gear : | 1.00:1 |
Production Figures
Total Dodge Production for 1977 : | 526,254 |
Total 1977 Monaco production : | 63,684 |
1977 Dodge Monaco | |
3S Wagon 4 dr. 9 P : | 4,297 |
Brougham HardTop Coupe 2 dr. 6 P : | 11,405 |
Brougham Sedan 4 dr. 6 P : | 14,908 |
Coupe 2 dr. 6 P : | 10,368 |
Crestwood 2S Station Wagon 4 dr. 6 P : | 1,341 |
Crestwood 3S Station Wagon 4 dr. 9 P : | 2,895 |
Sedan 4 dr. 6 P : | 15,433 |
Station Wagon 4 dr. 6 P : | 3,037 |
Dimension(s)
Coupe
Seating Capacity : | 6 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 213.7 in | 5428 mm. |
Width : | 77.7 in | 1974 mm. |
Height : | 52.6 in | 1336 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Front Track : | 61.9 in | 1572 mm. |
Rear Track : | 62.0 in | 1575 mm. |
Sedan
Price : | $3,990 |
Weight : | 3660 lbs | 1660.148 kg |
Seating Capacity : | 6 |
Doors : | 4 |
Exterior | |
---|---|
Length : | 213.7 in | 5428 mm. |
Width : | 77.7 in | 1974 mm. |
Height : | 52.6 in | 1336 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Front Track : | 61.9 in | 1572 mm. |
Rear Track : | 62.0 in | 1575 mm. |
Station Wagon
Price : | $4,725 |
Weight : | 4340 lbs | 1968.591 kg |
Seating Capacity : | 6 |
Doors : | 4 |
Exterior | |
---|---|
Length : | 225.6 in | 5730 mm. |
Width : | 78.8 in | 2002 mm. |
Height : | 55.8 in | 1417 mm. |
Wheelbase : | 117.5 in | 2985 mm. |
Front Track : | 61.9 in | 1572 mm. |
Rear Track : | 62.0 in | 1575 mm. |
3S Wagon
Price : | $4,865 |
Weight : | 4400 lbs | 1995.806 kg |
Seating Capacity : | 9 |
Doors : | 4 |
Exterior | |
---|---|
Length : | 225.6 in | 5730 mm. |
Width : | 78.8 in | 2002 mm. |
Height : | 55.8 in | 1417 mm. |
Wheelbase : | 117.5 in | 2985 mm. |
Front Track : | 61.9 in | 1572 mm. |
Rear Track : | 62.0 in | 1575 mm. |
Brougham HardTop Coupe
Price : | $4,145 |
Weight : | 3640 lbs | 1651.076 kg |
Seating Capacity : | 6 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 213.7 in | 5428 mm. |
Width : | 77.7 in | 1974 mm. |
Height : | 52.6 in | 1336 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Front Track : | 61.9 in | 1572 mm. |
Rear Track : | 62.0 in | 1575 mm. |
Brougham Sedan
Price : | $4,215 |
Weight : | 3670 lbs | 1664.684 kg |
Seating Capacity : | 6 |
Doors : | 4 |
Exterior | |
---|---|
Length : | 213.7 in | 5428 mm. |
Width : | 77.7 in | 1974 mm. |
Height : | 52.6 in | 1336 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Front Track : | 61.9 in | 1572 mm. |
Rear Track : | 62.0 in | 1575 mm. |
Crestwood 2S Station Wagon
Price : | $5,225 |
Weight : | 4335 lbs | 1966.323 kg |
Seating Capacity : | 6 |
Doors : | 4 |
Exterior | |
---|---|
Length : | 225.6 in | 5730 mm. |
Width : | 78.8 in | 2002 mm. |
Height : | 55.8 in | 1417 mm. |
Wheelbase : | 117.5 in | 2985 mm. |
Front Track : | 61.9 in | 1572 mm. |
Rear Track : | 62.0 in | 1575 mm. |
Crestwood 3S Station Wagon
Price : | $5,365 |
Weight : | 4400 lbs | 1995.806 kg |
Seating Capacity : | 9 |
Doors : | 4 |
Exterior | |
---|---|
Length : | 225.6 in | 5730 mm. |
Width : | 78.8 in | 2002 mm. |
Height : | 55.8 in | 1417 mm. |
Wheelbase : | 117.5 in | 2985 mm. |
Front Track : | 61.9 in | 1572 mm. |
Rear Track : | 62.0 in | 1575 mm. |
Special HardTop Coupe
Price : | $4,255 |
Seating Capacity : | 6 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 213.7 in | 5428 mm. |
Width : | 77.7 in | 1974 mm. |
Height : | 52.6 in | 1336 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Front Track : | 61.9 in | 1572 mm. |
Rear Track : | 62.0 in | 1575 mm. |
Handling
Suspension | |
---|---|
Front : Longitudinal Front Torsion Bars with Lower Trailing Links and Anti-Sway Bar Rear : Semi-Elliptic Rear Leaf Springs |
Steering | |
---|---|
Recirculating Ball |
Tires / Wheels | |
---|---|
Tires : | F78 x 15 |
Wheels : | 15 x 5.5 |
Recall
Component | ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE |
---|---|
Manufacturer | CHRYSLER CORPORATION |
NHTSA Campaign ID | 77V037000 |
Summary | THE REQUIRED MUFFLER TO FLOOR PAN HEAT SHIELDS WERE OMITTED FROM THE INVOLVED VEHICLES. THESE HEAT SHIELDS ARE NECESSARY TO PROTECT THE PASSENGER COMPARTMENT INTERIOR MATERIALS, INCLUDING SEAT BELT WEBBING, FROM HEAT DAMAGE. |
Remedy | THE DEALER WILL INSTALL THE NECESSARY HEAT SHIELDS ON ALL AFFECTED VEHICLES, FREE OF CHARGE. |
Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES (POLICE MODELS).SYSTEM: EHAUST; MUFFLER, RESONATOR.CONSEQUENCES OF DEFECT: PASSENGERS COULD RECEIVE SERIOUS PERSONAL INJURY DUE TOEXCESSIVE HEAT. |
Component | POWER TRAIN:AUTOMATIC TRANSMISSION |
---|---|
Manufacturer | CHRYSLER CORPORATION |
NHTSA Campaign ID | 77V131000 |
Summary | THE PLASTIC TRANSMISSION SHIFT LINKAGE BUSHINGS INSTALLED ON THE INVOLVED VEHICLES MAY BECOME HEAT DAMAGED BECAUSE THEY ARE LOCATED NEAR THE MINI-CATALYTIC CONVERTER. THIS CONDITION COULD ALTER THE ADJUSTED RELATIONSHIP OF THE TRANSMISSION SHIFT LINKAGE, CAUSING THE TRANSMISSION TO BE IN A GEAR POSITION OTHER THAN THAT INDICATED BY THE GEAR SHIFT SELECTOR. |
Remedy | DEALER WILL REPLACE THE PLASTIC BUSHINGS WITH STEEL BUSHINGS AND INSTALL RETAINING CLIPS TO ENSURE THAT SHIFT ROD IS SECURELY ENGAGED TO THE LINKAGE SYSTEM. |
Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 440 HIGH PERFORMANCEENGINES AND CALIFORNIA EMISSION CONTROLS.SYSTEM: POWER TRAIN; TRANSMISSION, SHIFT LINKAGE BUSHINGS.CONSEQUENCES OF DEFECT: THE DRIVER MAY NOT REALIZE WHICH GEAR THE TRANSMISSIONIS IN, AND A VEHICLE ACCIDENT COULD RESULT.NOTE: UNTIL THE PROBLEM IS CORRECTED, THE DRIVER SHOULD PROCEDE CAUTIOUSLYWHENEVER STARTING OUT AFTER SHIFTING GEARS. THE PARKING BRAKE SHOULD BE ENGAGEDWHENEVER THE VEHICLE IS PARKED. |
Component | FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM |
---|---|
Manufacturer | CHRYSLER CORPORATION |
Mfr Report Date | 19740801 |
NHTSA Campaign ID | 78V020000 |
Summary | WHEN THE ACCELERATOR PEDAL ON THE INVOLVED VEHICLES IS DEPRESSED AND THE ACCELERATOR PUMP IS ACTIVATED, A DISTORTED ACCELERATOR PUMP SEAL IN THE CARBURETOR MAY PREVENT THE PUMP FROM DELIVERING THE PROPER AMOUNT OF FUEL. |
Remedy | DEALER WILL REPLACE THE CARBURETOR ACCELERATOR PUMP SEAL WITH A SEAL OF IMPROVED DISTORTION RESISTANCE. THE CARBURETOR WILL ALSO BE CHECKED FOR THE PROPER FLOAT LEVEL. |
Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 225 OR 318 CID ENGINES.SYSTEM: FUEL; CARBURETOR ACCELERATOR PUMP SEAL.CONSEQUENCES OF DEFECT: THIS MAY RESULT IN HESITATION OR LACK OF RESPONSE WHENDRIVER ATTEMPTS TO ACCELERATE. ENGINE STALLING MAY OCCUR IN SOME CASES; THISCOULD LEAD TO A VEHICLE ACCIDENT IN CERTAIN TRAFFIC SITUATIONS. |
Data updated June 2024
1977 Averages
Avg. Household Income : | $15,000 |
Avg. Home : | $49,300 |
Avg. Gallon of Gas : | $0.65 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1977 Dodge Monaco?
Q: What is the wheelbase size of the 1977 Dodge Monaco? A: The 1977 Dodge Monaco has wheelbase sizes of 115.00 and 117.50 inches.Q: What is the length of the 1977 Dodge Monaco? A: The 1977 Dodge Monaco has lengths of 213.70 and 225.60 inches.Q: What is the width of the 1977 Dodge Monaco? A: The 1977 Dodge Monaco has width of 77.70 and 78.80 inches.Q: How much did the 1977 Dodge Monaco cost when new?A: The 1977 Dodge Monaco cost approximately $3,910 to $5,365 (USD) when new.Q: What were the bodystyles of the 1977 Dodge Monaco? A: The 1977 Dodge Monaco was offered as a 3S Wagon, Brougham HardTop Coupe, Brougham Sedan, Coupe, Crestwood 2S Station Wagon, Crestwood 3S Station Wagon, Sedan, Special HardTop Coupe, Station Wagon.Q: What tires did the 1977 Dodge Monaco have? A: The 1977 Dodge Monaco had F78 x 15 tires.Q: What type of wheels did the 1977 Dodge Monaco have? A: The 1977 Dodge Monaco had 15 x 5.5 wheels.Q: How many vehicles did Dodge produce in 1977? A: Dodge produced 526,254 automobiles in 1977.Q: How many 1977 Monacos were produced? A: Dodge produced 63,684 examples of the Monaco in 1977.Q: What engines did the 1977 Dodge Monaco have? A: The 1977 Dodge Monaco had the following engine options: Inline 6 (3687 cc | 225.0 cu in. | 3.7 L.) with 110 HP (80.96 KW) @ 3600 RPM and 180 Ft-Lbs (244 NM) @ 2000 RPM V 8 (5211 cc | 318.0 cu in. | 5.2 L.) with 145 HP (106.72 KW) @ 4000 RPM and 245 Ft-Lbs (332 NM) @ 1600 RPM V 8 (5899 cc | 360.0 cu in. | 5.9 L.) with 155 HP (114.08 KW) @ 3600 RPM and 275 Ft-Lbs (373 NM) @ 2000 RPM V 8 (5899 cc | 360.0 cu in. | 5.9 L.) with 175 HP (128.8 KW) @ 4000 RPM and 275 Ft-Lbs (373 NM) @ 2000 RPM V 8 (6555 cc | 400.0 cu in. | 6.6 L.) with 190 HP (139.84 KW) @ 3600 RPM and 305 Ft-Lbs (414 NM) @ 3200 RPM V 8 (7210 cc | 440.0 cu in. | 7.2 L.) with 195 HP (143.52 KW) @ 3600 RPM and 320 Ft-Lbs (434 NM) @ 2000 RPM V 8 (6555 cc | 400.0 cu in. | 6.6 L.) with 210 HP (154.56 KW) @ 4400 RPM and 305 Ft-Lbs (414 NM) @ 3200 RPM V 8 (6555 cc | 400.0 cu in. | 6.6 L.) with 240 HP (176.64 KW) @ 4400 RPM and 325 Ft-Lbs (441 NM) @ 3200 RPM Q: What transmissions did the 1977 Dodge Monaco have? A: The 1977 Dodge Monaco had the following gearbox options: 3 speed Manual Column shift, 3 speed Automatic Torque-Flite.
What are the dimension and mechanical specifications of the 1977 Dodge Monaco?
How many 1977 Dodge Monaco were produced?
How powerful was the 1977 Dodge Monaco? Was the 1977 Dodge Monaco popular? Was the 1977 Dodge Monaco expensive? What was the fuel economy of the 1977 Dodge Monaco?
Q: What is the wheelbase size of the 1977 Dodge Monaco? A: The 1977 Dodge Monaco has wheelbase sizes of 115.00 and 117.50 inches.Q: What is the length of the 1977 Dodge Monaco? A: The 1977 Dodge Monaco has lengths of 213.70 and 225.60 inches.Q: What is the width of the 1977 Dodge Monaco? A: The 1977 Dodge Monaco has width of 77.70 and 78.80 inches.Q: How much did the 1977 Dodge Monaco cost when new?A: The 1977 Dodge Monaco cost approximately $3,910 to $5,365 (USD) when new.Q: What were the bodystyles of the 1977 Dodge Monaco? A: The 1977 Dodge Monaco was offered as a 3S Wagon, Brougham HardTop Coupe, Brougham Sedan, Coupe, Crestwood 2S Station Wagon, Crestwood 3S Station Wagon, Sedan, Special HardTop Coupe, Station Wagon.Q: What tires did the 1977 Dodge Monaco have? A: The 1977 Dodge Monaco had F78 x 15 tires.Q: What type of wheels did the 1977 Dodge Monaco have? A: The 1977 Dodge Monaco had 15 x 5.5 wheels.Q: How many vehicles did Dodge produce in 1977? A: Dodge produced 526,254 automobiles in 1977.Q: How many 1977 Monacos were produced? A: Dodge produced 63,684 examples of the Monaco in 1977.Q: What engines did the 1977 Dodge Monaco have? A: The 1977 Dodge Monaco had the following engine options: Inline 6 (3687 cc | 225.0 cu in. | 3.7 L.) with 110 HP (80.96 KW) @ 3600 RPM and 180 Ft-Lbs (244 NM) @ 2000 RPM- 1977 Dodge Monaco Menu
- Article
- Image gallery
- Valuation
- Specifications
- Recalls
- Production figures