1968 Toyota Corona Specifications

Specifications

1966 1968

Features

Engine Location :	Front
Drive Type :	Rear Wheel
Body / Chassis :	Steel unibody
Production Years for Series :	1964 - 1969
Price :	$1,800-$2,000
Weight :	2200 lbs \| 997.903 kg

Performance

Top Speed :	91 mph \| 146.419 km/h

Engine & Transmission

Inline 4
Displacement :	1879 cc \| 114.7 cu in. \| 1.9 L.
Power :	90 BHP (66.24 KW) @ 4600 RPM
Torque :	110 Ft-Lbs (149 NM) @ 2600 RPM
Bore :	3.5 in \| 88 mm.
Stroke :	3.1 in \| 78 mm.
Compression :	8.0:1

Transmission:
3 Manual Column shift

Production Figures

Total Toyota Production for 1968 :	476,807
1968 Toyota Corona

Dimension(s)

Sedan

Exterior
Seating Capacity :	4
Doors :	4
Length :	162.4 in \| 4125 mm.
Width :	61.0 in \| 1549 mm.
Height :	55.9 in \| 1420 mm.
Wheelbase :	95.3 in \| 2421 mm.
Front Track :	48.5 in \| 1232 mm.
Rear Track :	48.5 in \| 1232 mm.

Hardtop Coupe

Chassis # RT52-34840
View info And history
Auction entries : 1

Exterior
Price :	$2,000
Weight :	2200 lbs \| 997.903 kg
Seating Capacity :	4
Doors :	2
Length :	162.4 in \| 4125 mm.
Width :	61.0 in \| 1549 mm.
Height :	55.9 in \| 1420 mm.
Wheelbase :	95.3 in \| 2421 mm.
Front Track :	48.5 in \| 1232 mm.
Rear Track :	48.5 in \| 1232 mm.

Handling

Suspension
Front : Unequal-length A-arms and coil springs Rear : Rigid axle with semi-elliptic leaf springs

Steering
Worm and Sector

Tires / Wheels
Tires :	5.60x13

Recall

Component	UNKNOWN OR OTHER
Manufacturer	TOYOTA MOTOR CO., LTD.
NHTSA Campaign ID	71V084000
Notes	TOYOTA CAMPAIGN NO 013.POSSIBILITY THAT ITEMS PLACED IN PACKAGE TRAY UNDERTHE RIGHT DASH PANEL MAY INADVERTENTLY FALL OVER PROTECTIVE PARTITION AND CAUSEPOSSIBLE MALFUNCTION OF ACCELERATOR LINKAGE.(CORRECT BY INSTALLING NEWPARTITION.)

Component	SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Manufacturer	TOYOTA MOTOR CO., LTD.
NHTSA Campaign ID	69V090000
Notes	POSSIBILITY THAT BRAKE TUBES COATED WITH 'SOLDER' MAY CORRODE AND CAUSE BRAKEFLUID LEAKAGE AND SUBSEQUENT BRAKE FAILURE.(CORRECT BY REPLACING BRAKE TUBESWITH ZINC COATED TUBES.)

Component	SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Manufacturer	TOYOTA MOTOR CO., LTD.
Mfr Report Date	19651201
NHTSA Campaign ID	69V138000
Notes	POSSIBILITY THAT BRAKE TUBES COATED WITH 'SOLDER' MAY, UNDER ADVERSE WEATHERAND ROAD CONDITIONS, CORRODE AND CAUSE BRAKE FLUID LEAKAGE AND SUBSEQUENT BRAKEFAILURE.(CORRECT BY REPLACING BRAKE TUBES WITH ZINC COATED TUBES.)

Component	FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM
Manufacturer	TOYOTA MOTOR CO., LTD.
Mfr Report Date	19671001
NHTSA Campaign ID	68V101000
Notes	POSSIBILITY THAT SCREWS WITHIN CARBURETOR AUTOMATIC-CHOKE MECHANISM SECURING THERMOSTAT HOUSING MAY BECOME LOOSE.IN VERY RARE CASES, DROPPING OF SCREWS WITHIN HOUSING MAY INTERFERE WITH CHOKE MECHANISM, PREVENTING THROTTLE LEVER FROM RETURNING TO IDLE POSITION AND MAKING VEHICLE DIFFICULT TO STOP.(CORRECT BY INSPECTING SCREWS AND TIGHTENING AND CAULKING WHERE NECESSARY.)

Information provided by NHTSA
Data updated June 2024

1968 Averages

Avg. Car Cost :	$2,822
Avg. Household Income :	$7,850
Avg. Home :	$14,950
Avg. Gallon of Gas :	$0.34

1968 Toyota Corona FAQs (show)

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1968 Toyota Corona?
How many 1968 Toyota Corona were produced?
How powerful was the 1968 Toyota Corona? Was the 1968 Toyota Corona popular? Was the 1968 Toyota Corona expensive? What was the fuel economy of the 1968 Toyota Corona?

Q: How fast is the 1968 Toyota Corona? A: The 1968 Toyota Corona has a top speed of 91 mph.

Q: What is the wheelbase size of the 1968 Toyota Corona? A: The 1968 Toyota Corona has a wheelbase size of 95.30 inches.

Q: What is the length of the 1968 Toyota Corona? A: The 1968 Toyota Corona has a length of 162.40 inches.

Q: What is the width of the 1968 Toyota Corona? A: The 1968 Toyota Corona has a width of 61.00 inches.

Q: How much did the 1968 Toyota Corona cost when new?A: The 1968 Toyota Corona cost approximately $1,800 to $2,000 (USD) when new.

Q: What were the bodystyles of the 1968 Toyota Corona? A: The 1968 Toyota Corona was offered as a Hardtop Coupe, Sedan.

Q: What tires did the 1968 Toyota Corona have? A: The 1968 Toyota Corona had 5.60x13 tires.

Q: How many vehicles did Toyota produce in 1968? A: Toyota produced 476,807 automobiles in 1968.

Q: What engine did the 1968 Toyota Corona have? A: The engine powering the 1968 Toyota Corona was a Inline 4 (1879 cc | 114.7 cu in. | 1.9 L.) with 90 BHP (66.24 KW) @ 4600 RPM and 110 Ft-Lbs (149 NM) @ 2600 RPM.

Q: What transmission did the 1968 Toyota Corona have? A: The 1968 Toyota Corona had a 3 speed Manual Column shift gearbox.