These are standard specifications for the 1974 Fiat X1/9, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
4 Manual
Chassis # 128AS*0024114
Engine # 128AS0404
Chassis # 128AS-0012555
Engine # 128AS0404
View info And history
Auction entries : 1
Information provided by NHTSA
Data updated January 2023
Features
Engine Location : | Mid |
Drive Type : | Rear Wheel |
Body / Chassis : | Steel unibody |
Production Years for Series : | 1972 - 1989 |
Body Designer : | Bertone |
Price : | $3,920 |
Weight : | 1940 lbs | 879.969 kg |
Engine & Transmission
Inline 4 | |
---|---|
Displacement : | 1290 cc | 78.7 cu in. | 1.3 L. |
Power : | 66.50 SAE @ 6200 RPM |
Torque : | 68 Ft-Lbs (92 NM) @ 3600 RPM |
Bore : | 3.4 in | 86 mm. |
Stroke : | 2.2 in | 56 mm. |
Compression : | 8.5:1 |
Main Bearings : | 5 |
Cylinder Block : | Cast-iron |
Cylinder Head : | Aluminum |
1 Solex 2-barrel carburetor |
4 Manual
Production Figures
Total Fiat Production for 1974 : | 1,205,754 |
1974 Fiat X1/9 |
Dimension(s)
Targa Coupe
Chassis # 128AS*0024114
Engine # 128AS0404
Chassis # 128AS-0012555
Engine # 128AS0404
View info And history
Auction entries : 1
Body Designer : | Bertone |
Seating Capacity : | 2 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 153.5 in | 3899 mm. |
Width : | 61.8 in | 1570 mm. |
Height : | 46.1 in | 1171 mm. |
Wheelbase : | 86.7 in | 2202 mm. |
Front Track : | 52.5 in | 1334 mm. |
Rear Track : | 52.9 in | 1344 mm. |
Handling
Suspension | |
---|---|
Front : MacPherson struts with coil springs Rear : Independent with lower wishbones, transverse control bar and struts/coil springs |
Steering | |
---|---|
Rack and Pinion |
Tires / Wheels | |
---|---|
Tires : | 145HR13 |
Recall
Component | VEHICLE SPEED CONTROL:ACCELERATOR PEDAL |
---|---|
Manufacturer | FIAT MOTORS OF N.A., INC. |
NHTSA Campaign ID | 74V026000 |
Notes | FIAT CAMPAIGN NO N/A.POSSIBILITY THAT THE ACCELERATOR PEDAL MAY BECOMEDETACHED FROM THE ACCELERATOR LINKAGE WHEN THE PEDAL IS DEPRESSED.IF THEPEDAL BECOMES DETACHED IN THE COURSE OF OPERATION THE ENGINE WILL IDLE, THE CARWILL DECELERATE, AND THE POSSIBILITY OF AN ACCIDENT WILL EXIST.(CORRECT BYINSPECTING AND REINFORCING PEDAL TO LINKAGE CONNECTION TO PRECLUDE SEPARATION). |
Component | STRUCTURE:BODY |
---|---|
Manufacturer | FIAT MOTORS OF N.A., INC. |
NHTSA Campaign ID | 74V072000 |
Notes | FIAT CAMPAIGN NO N/A.POSSIBILITY THAT THE HEAT GENERATED BY THE EXHAUSTSYSTEM MAY CAUSE THE TEMPERATURE IN THE REAR TRUNK COMPARTMENT TO REACH A LEVELAT WHICH THE RUBBER MAT IN THE TRUNK MAY MELT, GENERATING SMOKE AND ODOR OFSMOLDERING RUBBER.THIS CONDITION WILL BE CAUSED BY TOO LONG A WARM-UP PERIODAT IDLE SPEED.(CORRECT BY INSPECTING AND INSTALLING ADDITIONAL INSULATION INTHE TRUNK). |
Component | VEHICLE SPEED CONTROL |
---|---|
Manufacturer | FIAT MOTORS OF N.A., INC. |
NHTSA Campaign ID | 75V173000 |
Notes | FIAT CAMPAIGN NO N/A.POSSIBILITY THAT THE ACCELERATOR CABLE WAS INSTALLED INA MANNER WHICH WOULD CAUSE THE ACCELERATOR ASSEMBLY TO FUNCTION ABNORMALLY,CAUSING BREAKAGE OF THE ACCELERATOR CABLE.IF THIS CONDITION EXISTS, THEENGINE WILL IDLE AND CAR WILL DECELERATE AND DANGER OF VEHICLE CRASH WILLEXIST.(CORRECT BY INSPECTING AND INSTALLING COMPLETE NEW ACCELERATORASSEMBLY). |
Data updated January 2023
1974 Averages
Avg. Car Cost : | $3,750 |
Avg. Household Income : | $13,900 |
Avg. Home : | $34,900 |
Avg. Gallon of Gas : | $0.55 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1974 Fiat X1/9?
Q: What is the wheelbase size of the 1974 Fiat X1/9? A: The 1974 Fiat X1/9 has a wheelbase size of 86.70 inches.Q: What is the length of the 1974 Fiat X1/9? A: The 1974 Fiat X1/9 has a length of 153.50 inches.Q: What is the width of the 1974 Fiat X1/9? A: The 1974 Fiat X1/9 has a width of 61.80 inches.Q: How much did the 1974 Fiat X1/9 cost when new?A: The 1974 Fiat X1/9 had a base price of approximately $3,920 (USD).Q: What is the bodystyle of the 1974 Fiat X1/9? A: The 1974 Fiat X1/9 was a Targa Coupe.Q: What tires did the 1974 Fiat X1/9 have? A: The 1974 Fiat X1/9 had 145HR13 tires.Q: How many vehicles did Fiat produce in 1974? A: Fiat produced 1,205,754 automobiles in 1974.Q: What engine did the 1974 Fiat X1/9 have? A: The engine powering the 1974 Fiat X1/9 was a Inline 4 (1290 cc | 78.7 cu in. | 1.3 L.) with 66.50 SAE @ 6200 RPM and 68 Ft-Lbs (92 NM) @ 3600 RPM. Q: What transmission did the 1974 Fiat X1/9 have? A: The 1974 Fiat X1/9 had a 4 speed Manual gearbox.
What are the dimension and mechanical specifications of the 1974 Fiat X1/9?
How many 1974 Fiat X1/9 were produced?
How powerful was the 1974 Fiat X1/9? Was the 1974 Fiat X1/9 popular? Was the 1974 Fiat X1/9 expensive? What was the fuel economy of the 1974 Fiat X1/9?
Q: What is the wheelbase size of the 1974 Fiat X1/9? A: The 1974 Fiat X1/9 has a wheelbase size of 86.70 inches.Q: What is the length of the 1974 Fiat X1/9? A: The 1974 Fiat X1/9 has a length of 153.50 inches.Q: What is the width of the 1974 Fiat X1/9? A: The 1974 Fiat X1/9 has a width of 61.80 inches.Q: How much did the 1974 Fiat X1/9 cost when new?A: The 1974 Fiat X1/9 had a base price of approximately $3,920 (USD).Q: What is the bodystyle of the 1974 Fiat X1/9? A: The 1974 Fiat X1/9 was a Targa Coupe.Q: What tires did the 1974 Fiat X1/9 have? A: The 1974 Fiat X1/9 had 145HR13 tires.Q: How many vehicles did Fiat produce in 1974? A: Fiat produced 1,205,754 automobiles in 1974.Q: What engine did the 1974 Fiat X1/9 have? A: The engine powering the 1974 Fiat X1/9 was a Inline 4 (1290 cc | 78.7 cu in. | 1.3 L.) with 66.50 SAE @ 6200 RPM and 68 Ft-Lbs (92 NM) @ 3600 RPM. Q: What transmission did the 1974 Fiat X1/9 have? A: The 1974 Fiat X1/9 had a 4 speed Manual gearbox. Similar Vehicles
Similarly Sized Vehicles
from 1974
Similarly Priced Vehicles
Fiat Monthly Sales Volume
March 2023
138