These are standard specifications for the 2010 Toyota Highlander Hybrid, not necessarily specifications for the vehicle(s) in the photo(s).
Hybrid System
Information provided by NHTSA
Data updated January 2023
For additional safety information and testing procedures, please visit the NHTSA website.
Features
| Engine Location : | Front |
| Drive Type : | 4WD |
| 4WD - i Models Equipped with Front & Rear Electric Drive Motors | |
| Body / Chassis : | Unitized steel |
| Production Years for Series : | 2007 - 2013 |
| Weight : | 4508 lbs | 2044.794 kg |
| MPG City : | 27 |
| MPG Highway : | 25 |
| Combined MPG : | 26.00 |
Performance
| Coefficient of Drag : | 0.34 |
Engine & Transmission
| V 6 | |
|---|---|
| Displacement : | 3300 cc | 201.4 cu in. | 3.3 L. |
| Power : | 209 HP (153.824 KW) @ 5600 RPM |
| Torque : | 212 Ft-Lbs (287 NM) @ 3600 RPM |
| Bore : | 3.6 in | 92 mm. |
| Stroke : | 3.3 in | 83 mm. |
| Compression : | 10.8:1 |
| Valvetrain : | 24 DOHC (4 valves per cylinder) |
| Construction : | Aluminum block and head |
| Multi Point Fuel Injection | |
| Electric Motor | |
|---|---|
| Type : | Permanent Magnet Motor |
| : | Motor Generator 1 |
| Voltage : | 650.00V maximum. |
| Type : | Permanent Magnet Motor |
| : | Motor Generator 2 |
| Power Output : | 167.00 HP @ 4500.00 RPM |
| Torque : | 247.00 Ft-Lbs @ 1500.00 RPM |
| Voltage : | 650.00V maximum. |
| Type : | Permanent Magnet Motor |
| : | Motor Generator Rear |
| Power Output : | 68.00 HP @ 4610.00 RPM |
| Torque : | 96.00 Ft-Lbs @ 610.00 RPM |
| Voltage : | 650.00V maximum. |
| Battery | |
| Type : | Sealed Nickel-Metal Hydride (Ni-MH) |
| Power : | 45.00 kw |
| Voltage : | 288.00V |
| : | Hybrid Battery Pack |
Handling
Safety
| NHTSA Crash-Test Results | |
|---|---|
| 2010 Toyota Highlander Hybrid 4-DR. w/SAB | |
| Frontal driver : |  |
| Frontal passenger : |  |
| Side driver : | |
| Side rear passenger : | |
| Rollover 2 Wheel Drive : | |
| Rollover 4 Wheel Drive : | |
Recall
| Component | EQUIPMENT:OTHER:LABELS |
|---|---|
| Manufacturer | Southeast Toyota Distributors, LLC |
| NHTSA Campaign ID | 13V123000 |
| Summary | Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota Tacoma, 2011-2012 Toyota Sienna, 2012 Toyota Prius, 2013 Scion FR-S, 2011 Scion XD, 2011 Scion XB, and 2012 Scion TC vehicles. These vehicles were sold with labels that were outside the allowable one percent of accuracy of actual weight added. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 110, 'Tire Selection and Rims.' |
| Consequence | An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage. |
| Remedy | Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859. |
| Notes | Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
| Component | SEATS |
|---|---|
| Manufacturer | Southeast Toyota Distributors, LLC |
| NHTSA Campaign ID | 13V014000 |
| Summary | Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed. |
| Consequence | If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment. |
| Remedy | Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859. |
| Notes | Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
| Component | HYBRID PROPULSION SYSTEM: INVERTER |
|---|---|
| Manufacturer | Toyota Motor Engineering & Manufacturing |
| Mfr Report Date | 20050216 |
| NHTSA Campaign ID | 13V396000 |
| Summary | Toyota is recalling certain model year 2006-2010 Highlander hybrid vehicles manufactured February 16, 2005, through July 29, 2010; and model year 2006-2008 Lexus RX400h vehicles manufactured February 23, 2005, through December 2, 2008. The Intelligent Power Module (IPM) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. If this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel. |
| Consequence | The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. It is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash. |
| Remedy | Toyota will notify owners, and dealers will replace the IPM free of charge. Owners may contact Toyota at 1-800-331-4331. Vehicles that had their IPM replaced under recall 11V-342 are not affected by this campaign. |
| Notes | Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
| Component | VISIBILITY:POWER WINDOW DEVICES AND CONTROLS |
|---|---|
| Manufacturer | Toyota Motor Engineering & Manufacturing |
| Mfr Report Date | 20080801 |
| NHTSA Campaign ID | 15V689000 |
| Summary | Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts. |
| Consequence | If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire. |
| Remedy | Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M. |
| Notes | Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
Data updated January 2023
2010 Averages
| Avg. Home : | $184,000 |
| Avg. Gallon of Gas : | $2.74 |
| Avg. Stamp : | $0 |
| Total Car Production : | 7,743,093 |
2010 Toyota Highlander Hybrid FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 2010 Toyota Highlander Hybrid?
Q: What is the wheelbase size of the 2010 Toyota Highlander Hybrid? A: The 2010 Toyota Highlander Hybrid has a wheelbase size of 109.80 inches.Q: What is the length of the 2010 Toyota Highlander Hybrid? A: The 2010 Toyota Highlander Hybrid has a length of 188.40 inches.Q: What is the width of the 2010 Toyota Highlander Hybrid? A: The 2010 Toyota Highlander Hybrid has a width of 75.20 inches.Q: How much headroom does the 2010 Toyota Highlander Hybrid have?A: The 2010 Toyota Highlander Hybrid has 40.60 inches of headroom.Q: How much legroom does the 2010 Toyota Highlander Hybrid have?A: The 2010 Toyota Highlander Hybrid has legroom of 43.20 inches.Q: What is the 2010 Toyota Highlander Hybrid's towing capacity?A: The 2010 Toyota Highlander Hybrid has a towing capaicty of 3500.00 lbs.Q: What is the bodystyle of the 2010 Toyota Highlander Hybrid? A: The 2010 Toyota Highlander Hybrid was a SUV.Q: What engine did the 2010 Toyota Highlander Hybrid have? A: The engine powering the 2010 Toyota Highlander Hybrid was a V 6 (3300 cc | 201.4 cu in. | 3.3 L.) with 209 HP (153.824 KW) @ 5600 RPM and 212 Ft-Lbs (287 NM) @ 3600 RPM.