1984 Chrysler Laser Navigation
Features
Engine Location : | Front |
Drive Type : | Front Wheel |
Body / Chassis : | Unibody |
Production Years for Series : | 1984 - 1986 |
Price : | $8,650-$10,545 |
Weight : | 2530 lbs | 1147.589 kg |
Engine & Transmission
Inline 4 | |
---|---|
Displacement : | 2212 cc | 135.0 cu in. | 2.2 L. |
Power : | 99 HP (72.864 KW) @ 5600 RPM |
Torque : | 121 Ft-Lbs (164 NM) @ 3200 RPM |
Bore : | 3.4 in | 87 mm. |
Stroke : | 3.6 in | 92 mm. |
Compression : | 9.0:1 |
Main Bearings : | 5 |
Cylinder Block : | Cast-iron |
Cylinder Head : | Aluminum |
Electronic fuel injection |
Turbocharged Inline 4 | |
---|---|
Displacement : | 2212 cc | 135.0 cu in. | 2.2 L. |
Power : | 140 HP (103.04 KW) @ 5200 RPM |
Torque : | 160 Ft-Lbs (217 NM) @ 3600 RPM |
Bore : | 3.4 in | 87 mm. |
Stroke : | 3.6 in | 92 mm. |
Compression : | 8.1:1 |
Main Bearings : | 5 |
Cylinder Block : | Cast-iron |
Cylinder Head : | Aluminum |
Electronic fuel injection |
5 Manual , 3 Automatic TorqueFlite
Gear Ratios
1st Gear : | 3.29:1 |
2nd Gear : | 2.08:1 |
3rd Gear : | 1.45:1 |
4th Gear : | 1.04:1 |
5th Gear : | 0.72:1 |
Production Figures
Total Chrysler Production for 1984 : | 375,853 |
1984 Chrysler Laser | |
Hatchback 2 dr. 4 P : | 33,976 |
Hatchback 2 dr. 4 P : | 25,882 |
Handling
Recall
Component | SUSPENSION |
---|---|
Manufacturer | FEDERAL-MOGUL CHASSIS PRODUCTS |
NHTSA Campaign ID | 08E033000 |
Summary | FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE. |
Consequence | THE NUTS INCLUDED IN THE PACKAGING FOR THESE BALL JOINT ASSEMBLIES ARE MISSING THE INTENDED PREVAILING TORQUE (SELF-LOCKING) FEATURE. IF THE INCORRECT ***** WAS TO BECOME LOOSE, THE JOINING MEMBERS MAY LOOSEN LEADING TO A SEPARATION OF THE BALL JOINT. THIS MAY RESULT IN LOSS OF VEHICLE CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH. |
Remedy | FEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659. |
Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET BALL JOINT ASSEMBLIES AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY THE VEHICLE MANUFACTURERS.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
Component | LATCHES/LOCKS/LINKAGES:HOOD:LATCH |
---|---|
Manufacturer | CHRYSLER CORPORATION |
Mfr Report Date | 19830701 |
NHTSA Campaign ID | 84V008000 |
Summary | SOME HOOD LATCH ASSEMBLIES MAY HAVE BEEN IMPROPERLY REPAIRED AT THE FACTORY, OR INCORRECT FASTENERS WERE USED. HOOD LATCH ATTACHMENT WILL NOT BE STRONG ENOUGH AND WILL LIKELY WEAKEN THE INNER HOOD PANEL. |
Remedy | INSPECT VEHICLES AND, IF INCORRECTLY ASSEMBLED OR REPAIRED, THE HOOD, INCLUDING THE LATCH, WILL BE REPLACED. |
Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: HOOD LATCH SYSTEM.CONSEQUENCES OF DEFECT: THE HOOD COULD RAISE WITHOUT WARNING, BLINDING THEDRIVER, AND POSSIBLY CAUSING AN ACCIDENT. |
Data updated June 2024
1984 Averages
Avg. Household Income : | $21,600 |
Avg. Home : | $86,730 |
Avg. Gallon of Gas : | $1.10 |
1984 Chrysler Laser FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1984 Chrysler Laser?
Q: What is the wheelbase size of the 1984 Chrysler Laser? A: The 1984 Chrysler Laser has a wheelbase size of 97.00 inches.Q: What is the length of the 1984 Chrysler Laser? A: The 1984 Chrysler Laser has a length of 175.00 inches.Q: What is the width of the 1984 Chrysler Laser? A: The 1984 Chrysler Laser has a width of 69.30 inches.Q: How much did the 1984 Chrysler Laser cost when new?A: The 1984 Chrysler Laser cost approximately $8,650 to $10,545 (USD) when new.Q: What is the bodystyle of the 1984 Chrysler Laser? A: The 1984 Chrysler Laser was a Hatchback.Q: How many vehicles did Chrysler produce in 1984? A: Chrysler produced 375,853 automobiles in 1984.Q: What engines did the 1984 Chrysler Laser have? A: The 1984 Chrysler Laser had the following engine options: Inline 4 (2212 cc | 135.0 cu in. | 2.2 L.) with 99 HP (72.864 KW) @ 5600 RPM and 121 Ft-Lbs (164 NM) @ 3200 RPM Turbocharged Inline 4 (2212 cc | 135.0 cu in. | 2.2 L.) with 140 HP (103.04 KW) @ 5200 RPM and 160 Ft-Lbs (217 NM) @ 3600 RPM Q: What transmissions did the 1984 Chrysler Laser have? A: The 1984 Chrysler Laser had the following gearbox options: 5 speed Manual, 3 speed Automatic TorqueFlite.
What are the dimension and mechanical specifications of the 1984 Chrysler Laser?
How many 1984 Chrysler Laser were produced?
How powerful was the 1984 Chrysler Laser? Was the 1984 Chrysler Laser popular? Was the 1984 Chrysler Laser expensive? What was the fuel economy of the 1984 Chrysler Laser?
Q: What is the wheelbase size of the 1984 Chrysler Laser? A: The 1984 Chrysler Laser has a wheelbase size of 97.00 inches.Q: What is the length of the 1984 Chrysler Laser? A: The 1984 Chrysler Laser has a length of 175.00 inches.Q: What is the width of the 1984 Chrysler Laser? A: The 1984 Chrysler Laser has a width of 69.30 inches.Q: How much did the 1984 Chrysler Laser cost when new?A: The 1984 Chrysler Laser cost approximately $8,650 to $10,545 (USD) when new.Q: What is the bodystyle of the 1984 Chrysler Laser? A: The 1984 Chrysler Laser was a Hatchback.Q: How many vehicles did Chrysler produce in 1984? A: Chrysler produced 375,853 automobiles in 1984.Q: What engines did the 1984 Chrysler Laser have? A: The 1984 Chrysler Laser had the following engine options: Inline 4 (2212 cc | 135.0 cu in. | 2.2 L.) with 99 HP (72.864 KW) @ 5600 RPM and 121 Ft-Lbs (164 NM) @ 3200 RPM- 1984 Chrysler Laser Menu
- Article
- Image gallery
- Valuation
- Specifications
- Recalls
- Production figures