1987 Cadillac Brougham Navigation
Features
Drive Type : | Rear Wheel |
Production Years for Series : | 1980 - 1992 |
Price : | $22,640 |
Weight : | 4045 lbs | 1834.781 kg |
Engine & Transmission
V 8 | |
---|---|
Displacement : | 4080 cc | 249.0 cu in. | 4.1 L. |
Power : | 170 HP (125.12 KW) @ 430 RPM |
Torque : | 235 Ft-Lbs (319 NM) @ 3200 RPM |
Bore : | 3.5 in | 88 mm. |
Stroke : | 3.3 in | 84 mm. |
Compression : | 8.5:1 |
Main Bearings : | 5 |
Cylinder Block : | Aluminum |
Sequential Electronic Fuel Injection |
4 Automatic THM 200-4R TCC
Production Figures
Total Cadillac Production for 1987 : | 282,582 |
1987 Cadillac Brougham |
Dimension(s)
Station Wagon
Fuel Capacity : | 25.0 Gal |
Exterior | |
---|---|
Length : | 221.0 in | 5613 mm. |
Width : | 76.5 in | 1943 mm. |
Height : | 56.7 in | 1440 mm. |
Wheelbase : | 121.5 in | 3086 mm. |
Front Track : | 61.7 in | 1567 mm. |
Rear Track : | 60.7 in | 1542 mm. |
Sedan

Chassis # 1G6DW51Y5H9714461
Auction entries : 1
Price : | $22,640 |
Weight : | 3360 lbs | 1524.07 kg |
Fuel Capacity : | 25.0 Gal |
Seating Capacity : | 6 |
Doors : | 4 |
Exterior | |
---|---|
Length : | 221.0 in | 5613 mm. |
Width : | 76.5 in | 1943 mm. |
Height : | 56.7 in | 1440 mm. |
Wheelbase : | 121.5 in | 3086 mm. |
Front Track : | 61.7 in | 1567 mm. |
Rear Track : | 60.7 in | 1542 mm. |
Handling
Suspension | |
---|---|
Front : Independent with short/long arms, coil springs, direct acting shock absorbers, and link-type stabilizer bar Rear : Four link, coil springs with automatic level control and direct acting shock absorbers |
Steering | |
---|---|
Rack and Pinion with Power Assist |
Tires / Wheels | |
---|---|
Tires : | Michelin P225/75R15 |
Recall
Component | VEHICLE SPEED CONTROL |
---|---|
Manufacturer | GENERAL MOTORS CORP. |
Mfr Report Date | 19830801 |
NHTSA Campaign ID | 89V102000 |
Summary | A SMALL NYLON BUSHING IN THE CRUISE CONTROL SERVO BAIL MAY SLIP OUT OF PLACE, CAUSING INTERMITTENT AND UNEXPECTED INCREASES IN ENGINE SPEED OR DIESELING (ENGINE RUN ON WITH IGNITION OFF). |
Consequence | SERVO ROD ASSEMBLY COULD CATCH ON ENGINE COMPONENTS ANDRESULT IN A STUCK THROTTLE WITH POTENTIAL FOR A VEHICLE CRASH. |
Remedy | INSTALL A NEW BUSHING IN CRUISE CONTROL SERVO BAIL. |
Notes | SYSTEM:CRUISE CONTROL.VEHICLE DESCRIPTION:PASSENGER VEHICLES EQUIPPED WITH CRUISE CONTROL ANDCERTAIN GASOLINE AND DIESEL ENGINES. |
Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM |
---|---|
Manufacturer | MOLONEY COACH BUILDERS |
Mfr Report Date | 19860901 |
NHTSA Campaign ID | 91V011000 |
Summary | LIMOUSINE FAILED TO MEET STOPPING DISTANCE REQUIREMENTS OF FMVSS 105. |
Consequence | INCREASED STOPPING DISTANCE COULD RESULT IN AN ACCIDENT;VEHICLES DO NOT COMPLY WITH FMVSS 105. |
Remedy | REPLACE ORIGINAL REAR WHEEL BRAKE CYLINDER WITH A LARGER CYLINDER. |
Notes | SYSTEM: HYDRAULIC BRAKES; FMVSS 105.VEHICLE DESCRIPTION: 60 INCH ADDED STRETCH LIMOUSINES. |
Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS |
---|---|
Manufacturer | NATIONAL COACH ENGINEERIN |
Mfr Report Date | 19860901 |
NHTSA Campaign ID | 92V152000 |
Summary | THE INCREASED WEIGHT OF THE STRETCH CONVERSION LIMOUSINES REQUIRES LARGER DIAMETER REAR WHEEL BRAKE CYLINDERS THAN THOSE INSTALLED IN THE FACTORY. |
Consequence | THE VEHICLES DO NOT MEET THE STOPPING DISTANCEREQUIREMENTS OF FMVSS 105, 'HYDRAULIC BRAKE SYSTEMS'. |
Remedy | REPLACE THE EXISTING REAR WHEEL BRAKE CYLINDERS WITH LARGER DIAMETER BRAKE CYLINDERS. |
Notes | SYSTEM: BRAKES; REAR BRAKE CYLINDERS; FMVSS 105.VEHICLE DESCRIPTION: STRETCH LIMOUSINE CONVERSIONS. |
Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS |
---|---|
Manufacturer | ALLEN COACHWORKS |
Mfr Report Date | 19861001 |
NHTSA Campaign ID | 91V101000 |
Consequence | STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE. |
Remedy | REPLACE ORIGINAL 1' REAR WHEEL BRAKE CYLINDER WITH A 1 1/16' CYLINDER. |
Notes | SYSTEM: HYDRAULIC BRAKES; FMVSS 105.VEHICLE DESCRIPTION: REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FORPROPER BRAKING. |
Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS |
---|---|
Manufacturer | ULTRA LIMOUSINES |
Mfr Report Date | 19870101 |
NHTSA Campaign ID | 91V096000 |
Summary | REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING. |
Consequence | STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE. |
Remedy | REPLACE ORIGINAL 1' REAR WHEEL BRAKE CYLINDER WITH A 1 1/16' CYLINDER. |
Notes | SYSTEM: HYDRAULIC BRAKES; FMVSS 105.VEHICLE DESCRIPTION: LIMOUSINE CONVERSIONS. |
Data updated June 2024
1987 Averages
Avg. Car Cost : | $10,355 |
Avg. Household Income : | $24,350 |
Avg. Home : | $92,000 |
Avg. Gallon of Gas : | $0.89 |
Avg. Stamp : | $0 |
1987 Cadillac Brougham FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1987 Cadillac Brougham?
Q: What is the wheelbase size of the 1987 Cadillac Brougham? A: The 1987 Cadillac Brougham has a wheelbase size of 121.50 inches.Q: What is the length of the 1987 Cadillac Brougham? A: The 1987 Cadillac Brougham has a length of 221.00 inches.Q: What is the width of the 1987 Cadillac Brougham? A: The 1987 Cadillac Brougham has a width of 76.50 inches.Q: How much did the 1987 Cadillac Brougham cost when new?A: The 1987 Cadillac Brougham had a base price of approximately $22,640 (USD).Q: What were the bodystyles of the 1987 Cadillac Brougham? A: The 1987 Cadillac Brougham was offered as a Sedan, Station Wagon.Q: What tires did the 1987 Cadillac Brougham have? A: The 1987 Cadillac Brougham had Michelin P225/75R15 tires.Q: How many vehicles did Cadillac produce in 1987? A: Cadillac produced 282,582 automobiles in 1987.Q: What engine did the 1987 Cadillac Brougham have? A: The engine powering the 1987 Cadillac Brougham was a V 8 (4080 cc | 249.0 cu in. | 4.1 L.) with 170 HP (125.12 KW) @ 430 RPM and 235 Ft-Lbs (319 NM) @ 3200 RPM. Q: What transmission did the 1987 Cadillac Brougham have? A: The 1987 Cadillac Brougham had a 4 speed Automatic THM 200-4R TCC gearbox.
What are the dimension and mechanical specifications of the 1987 Cadillac Brougham?
How many 1987 Cadillac Brougham were produced?
How powerful was the 1987 Cadillac Brougham? Was the 1987 Cadillac Brougham popular? Was the 1987 Cadillac Brougham expensive? What was the fuel economy of the 1987 Cadillac Brougham?
Q: What is the wheelbase size of the 1987 Cadillac Brougham? A: The 1987 Cadillac Brougham has a wheelbase size of 121.50 inches.Q: What is the length of the 1987 Cadillac Brougham? A: The 1987 Cadillac Brougham has a length of 221.00 inches.Q: What is the width of the 1987 Cadillac Brougham? A: The 1987 Cadillac Brougham has a width of 76.50 inches.Q: How much did the 1987 Cadillac Brougham cost when new?A: The 1987 Cadillac Brougham had a base price of approximately $22,640 (USD).Q: What were the bodystyles of the 1987 Cadillac Brougham? A: The 1987 Cadillac Brougham was offered as a Sedan, Station Wagon.Q: What tires did the 1987 Cadillac Brougham have? A: The 1987 Cadillac Brougham had Michelin P225/75R15 tires.Q: How many vehicles did Cadillac produce in 1987? A: Cadillac produced 282,582 automobiles in 1987.Q: What engine did the 1987 Cadillac Brougham have? A: The engine powering the 1987 Cadillac Brougham was a V 8 (4080 cc | 249.0 cu in. | 4.1 L.) with 170 HP (125.12 KW) @ 430 RPM and 235 Ft-Lbs (319 NM) @ 3200 RPM. Q: What transmission did the 1987 Cadillac Brougham have? A: The 1987 Cadillac Brougham had a 4 speed Automatic THM 200-4R TCC gearbox. - 1987 Cadillac Brougham Menu
- Article
- Image gallery
- Valuation
- Specifications
- Profiles
- Recalls