These are standard specifications for the 1975 Dodge Charger, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
Automatic TorqueFlite
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Production Years for Series : | 1975 - 1978 |
| Price : | $4,900 |
| Weight : | 3950 lbs | 1791.69 kg |
Engine & Transmission
| V 8 | |
|---|---|
| Displacement : | 5899 cc | 360.0 cu in. | 5.9 L. |
| Power : | 180 BHP (132.48 KW) @ 4000 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.6 in | 91 mm. |
| Compression : | 8.4:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| 2-barrel carburetor | |
| V 8 | |
|---|---|
| Displacement : | 6555 cc | 400.0 cu in. | 6.6 L. |
| Power : | 190 BHP (139.84 KW) @ 4200 RPM |
| Bore : | 4.3 in | 110 mm. |
| Stroke : | 3.4 in | 86 mm. |
| Compression : | 8.2:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| 4-Barrel Carburetor | |
| V 8 | |
|---|---|
| Displacement : | 5899 cc | 360.0 cu in. | 5.9 L. |
| Power : | 200 BHP (147.2 KW) @ 4000 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.6 in | 91 mm. |
| Compression : | 8.4:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| 4-Barrel Carburetor | |
| V 8 | |
|---|---|
| Displacement : | 7210 cc | 440.0 cu in. | 7.2 L. |
| Power : | 215 BHP (158.24 KW) @ 4000 RPM |
| Bore : | 4.3 in | 110 mm. |
| Stroke : | 3.8 in | 95 mm. |
| Compression : | 8.2:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| 4-Barrel Carburetor | |
Automatic TorqueFlite
Production Figures
| Total Dodge Production for 1975 : | 377,462 |
| Total 1975 Charger production : | 30,812 |
| 1975 Dodge Charger | |
| Hardtop Coupe 2 dr. 6 P : | 30,812 |
Handling
Recall
| Component | VEHICLE SPEED CONTROL |
|---|---|
| Manufacturer | CHRYSLER CORPORATION |
| NHTSA Campaign ID | 76V008000 |
| Notes | CHRYSLER CAMPAIGN NO 206.EQUIPPED WITH 360/2 BARREL ENGINES AND AUTOMATICSPEED CONTROLS.POSSIBILITY THAT THE AUTOMATIC SPEED CONTROL LINKAGE MAY HAVEBEEN ASSEMBLED IN A MANNER WHICH MAY ALLOW THE SPEED CONTROL LOST MOTION LINKTO TRAVEL OVERCENTER WHEN THE ACCELERATOR PEDAL IS PUSHED TO THE WIDE OPENTHROTTLE POSITION.IF THIS OCCURS, IT CAN RESULT IN THE CARBURETOR BEING HELDAT WIDE OPEN POSITION.(CORRECT BY INSPECTING AND INSTALLING A SUPPORT CLIP TORESTRICT TRAVEL OF SPEED CONTROL LINKAGE). |
| Component | FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM |
|---|---|
| Manufacturer | CHRYSLER CORPORATION |
| Mfr Report Date | 19740801 |
| NHTSA Campaign ID | 78V020000 |
| Summary | WHEN THE ACCELERATOR PEDAL ON THE INVOLVED VEHICLES IS DEPRESSED AND THE ACCELERATOR PUMP IS ACTIVATED, A DISTORTED ACCELERATOR PUMP SEAL IN THE CARBURETOR MAY PREVENT THE PUMP FROM DELIVERING THE PROPER AMOUNT OF FUEL. |
| Remedy | DEALER WILL REPLACE THE CARBURETOR ACCELERATOR PUMP SEAL WITH A SEAL OF IMPROVED DISTORTION RESISTANCE. THE CARBURETOR WILL ALSO BE CHECKED FOR THE PROPER FLOAT LEVEL. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 225 OR 318 CID ENGINES.SYSTEM: FUEL; CARBURETOR ACCELERATOR PUMP SEAL.CONSEQUENCES OF DEFECT: THIS MAY RESULT IN HESITATION OR LACK OF RESPONSE WHENDRIVER ATTEMPTS TO ACCELERATE. ENGINE STALLING MAY OCCUR IN SOME CASES; THISCOULD LEAD TO A VEHICLE ACCIDENT IN CERTAIN TRAFFIC SITUATIONS. |
Data updated January 2023
1975 Averages
| Avg. Car Cost : | $4,250 |
| Avg. Household Income : | $14,100 |
| Avg. Home : | $39,300 |
| Avg. Gallon of Gas : | $0.44 |
1975 Dodge Charger FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1975 Dodge Charger?
Q: What is the wheelbase size of the 1975 Dodge Charger? A: The 1975 Dodge Charger has a wheelbase size of 115.00 inches.Q: What is the length of the 1975 Dodge Charger? A: The 1975 Dodge Charger has a length of 218.00 inches.Q: What is the width of the 1975 Dodge Charger? A: The 1975 Dodge Charger has a width of 78.00 inches.Q: How much did the 1975 Dodge Charger cost when new?A: The 1975 Dodge Charger had a base price of approximately $4,900 (USD).Q: What is the bodystyle of the 1975 Dodge Charger? A: The 1975 Dodge Charger was a Hardtop Coupe.Q: How many vehicles did Dodge produce in 1975? A: Dodge produced 377,462 automobiles in 1975.Q: How many 1975 Chargers were produced? A: Dodge produced 30,812 examples of the Charger in 1975.Q: What engines did the 1975 Dodge Charger have? A: The 1975 Dodge Charger had the following engine options: V 8 (5899 cc | 360.0 cu in. | 5.9 L.) with 180 BHP (132.48 KW) @ 4000 RPM V 8 (6555 cc | 400.0 cu in. | 6.6 L.) with 190 BHP (139.84 KW) @ 4200 RPM V 8 (5899 cc | 360.0 cu in. | 5.9 L.) with 200 BHP (147.2 KW) @ 4000 RPM V 8 (7210 cc | 440.0 cu in. | 7.2 L.) with 215 BHP (158.24 KW) @ 4000 RPM Q: What transmission did the 1975 Dodge Charger have? A: The 1975 Dodge Charger had a Automatic TorqueFlite gearbox.