1972 Ford Ranchero Navigation
Features
Engine Location : | Front |
Drive Type : | Rear Wheel |
Production Years for Series : | 1972 - 1976 |
Engine & Transmission
Inline 6 | |
---|---|
Displacement : | 4097 cc | 250.0 cu in. | 4.1 L. |
Power : | 98 BHP (72.128 KW) @ 3400 RPM |
Bore : | 3.7 in | 93 mm. |
Stroke : | 3.9 in | 99 mm. |
Compression : | 8.0:1 |
Main Bearings : | 7 |
Cylinder Block : | Cast-iron |
Motorcraft 1-barrel carburetor |
V 8 | |
---|---|
Displacement : | 4949 cc | 302.0 cu in. | 5.0 L. |
Power : | 140 HP (103.04 KW) @ 4000 RPM |
Bore : | 4.0 in | 102 mm. |
Stroke : | 3.0 in | 76 mm. |
Compression : | 8.5:1 |
Main Bearings : | 5 |
Cylinder Block : | Cast-iron |
Motorcraft 2-barrel carburetor |
V 8 | |
---|---|
Displacement : | 5752 cc | 351.0 cu in. | 5.8 L. |
Power : | 153 HP (112.608 KW) @ 3800 RPM |
Bore : | 4.0 in | 102 mm. |
Stroke : | 3.5 in | 89 mm. |
Compression : | 8.3:1 |
Main Bearings : | 5 |
Cylinder Block : | Cast-iron |
Motorcraft 2-barrel carburetor |
V 8 | Serial Number Code 'S' | |
---|---|
Displacement : | 6555 cc | 400.0 cu in. | 6.6 L. |
Power : | 172 HP (126.592 KW) @ 4000 RPM |
Bore : | 4.0 in | 102 mm. |
Stroke : | 4.0 in | 102 mm. |
Compression : | 8.5:1 |
Main Bearings : | 5 |
Cylinder Block : | Cast-iron |
Motorcraft 2-barrel carburetor |
4 Manual , 3 Automatic C-6 SelectShift Cruise-O-Matic
Production Figures
Total Ford Production for 1972 : | 2,246,563 |
1972 Ford Ranchero |
Handling
Recall
Component | ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN |
---|---|
Manufacturer | FORD MOTOR COMPANY |
NHTSA Campaign ID | 77V097000 |
Summary | SEVEN-BLADE COOLING FANS INSTALLED ON THE INVOLVED VEHICLES MAY BE SUBJECT TO FATIGUE CRACKING OF THE BLADES DUE TO STRESSES GENERATED DURING NORMAL VEHICLE OPERATION. |
Remedy | DEALER WILL REPLACE SEVEN BLADE FAN WITH A FAN OF FIVE BLADE DESIGN, WITHOUT CHARGE TO OWNER. |
Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 302, 351, OR 400 CIDENGINES AND AIR CONDITIONING.SYSTEM: ENGINE AND ENGINE COOLING; FAN.CONSEQUENCES OF DEFECT: BLADES MAY BECOME FRAGMENTED AND PIECES COULD BEPROPELLED IN ALL DIRECTIONS, DAMAGING OTHER ENGINE COMPONENTS. NEARBY PERSONSCOULD BE SERIOUSLY INJURED IF THE HOOD IS OPEN AT THE TIME OF FAILURE.NOTE: VEHICLE SHOULD NOT BE SERVICED WITH THE HOOD OPEN AND THE ENGINE RUNNINGUNTIL THE PROBLEM HAS BEEN CORRECTED. |
Component | POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT |
---|---|
Manufacturer | FORD MOTOR COMPANY |
Mfr Report Date | 19710701 |
NHTSA Campaign ID | 72V095000 |
Notes | FORD CAMPAIGN NO H-2D AND H-2D #2.POSSIBILITY THAT REAR AXLE BEARING MAYDETERIORATE DUE TO HIGH AXLE SHAFT DEFLECTION.DETERIORATION OF BEARINGUSUALLY WILL PRODUCE SUFFICIENT NOISE AND VIBRATION TO INDICATE NEED FORREPAIR; RELATIVE MOVEMENT OF AXLE SHAFT WILL RESULT IN COMPLETE LOSS OFTRACTIVE EFFECT AS IT DISENGAGES FROM DIFFERENTIAL.(CORRECT BY INSPECTING ANDREPLACING WITH LARGER DIAMETER SHAFT AXLE AND NEW BEARING.) |
Component | STEERING:GEAR BOX (OTHER THAN RACK AND PINION) |
---|---|
Manufacturer | FORD MOTOR COMPANY |
Mfr Report Date | 19720301 |
NHTSA Campaign ID | 72V240000 |
Notes | FORD CAMPAIGN NO H-5B.W/POWER STEERING.POSSIBILITY THAT POWER STEERING GEARASSEMBLIES WERE BUILT WITH WORM AND VALVE ASSEMBLY TORSION ROD LOCK PININADVERTENTLY OMITTED.IF CONDITION EXISTS, COULD RESULT IN LOSS OF STEERINGCONTROL.(CORRECT BY INSPECTING AND INSTALLING PIN WHERE NECESSARY.) |
Data updated June 2024
1972 Averages
Avg. Household Income : | $11,800 |
Avg. Home : | $27,550 |
Avg. Gallon of Gas : | $0.55 |
1972 Ford Ranchero FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1972 Ford Ranchero?
Q: What is the wheelbase size of the 1972 Ford Ranchero? A: The 1972 Ford Ranchero has a wheelbase size of 118.00 inches.Q: What is the length of the 1972 Ford Ranchero? A: The 1972 Ford Ranchero has a length of 215.70 inches.Q: What is the width of the 1972 Ford Ranchero? A: The 1972 Ford Ranchero has a width of 79.00 inches.Q: What is the bodystyle of the 1972 Ford Ranchero? A: The 1972 Ford Ranchero was a Coupe utility.Q: How many vehicles did Ford produce in 1972? A: Ford produced 2,246,563 automobiles in 1972.Q: What engines did the 1972 Ford Ranchero have? A: The 1972 Ford Ranchero had the following engine options: Inline 6 (4097 cc | 250.0 cu in. | 4.1 L.) with 98 BHP (72.128 KW) @ 3400 RPM V 8 (4949 cc | 302.0 cu in. | 5.0 L.) with 140 HP (103.04 KW) @ 4000 RPM V 8 (5752 cc | 351.0 cu in. | 5.8 L.) with 153 HP (112.608 KW) @ 3800 RPM V 8 (6555 cc | 400.0 cu in. | 6.6 L.) with 172 HP (126.592 KW) @ 4000 RPM Q: What transmissions did the 1972 Ford Ranchero have? A: The 1972 Ford Ranchero had the following gearbox options: 4 speed Manual, 3 speed Automatic C-6 SelectShift Cruise-O-Matic.
What are the dimension and mechanical specifications of the 1972 Ford Ranchero?
How many 1972 Ford Ranchero were produced?
How powerful was the 1972 Ford Ranchero? Was the 1972 Ford Ranchero popular? Was the 1972 Ford Ranchero expensive? What was the fuel economy of the 1972 Ford Ranchero?
Q: What is the wheelbase size of the 1972 Ford Ranchero? A: The 1972 Ford Ranchero has a wheelbase size of 118.00 inches.Q: What is the length of the 1972 Ford Ranchero? A: The 1972 Ford Ranchero has a length of 215.70 inches.Q: What is the width of the 1972 Ford Ranchero? A: The 1972 Ford Ranchero has a width of 79.00 inches.Q: What is the bodystyle of the 1972 Ford Ranchero? A: The 1972 Ford Ranchero was a Coupe utility.Q: How many vehicles did Ford produce in 1972? A: Ford produced 2,246,563 automobiles in 1972.Q: What engines did the 1972 Ford Ranchero have? A: The 1972 Ford Ranchero had the following engine options: Inline 6 (4097 cc | 250.0 cu in. | 4.1 L.) with 98 BHP (72.128 KW) @ 3400 RPM- 1972 Ford Ranchero Menu
- Article
- Image gallery
- Valuation
- Specifications
- Profiles
- Recalls