1999 Mercury Grand Marquis Navigation
Features
Engine Location : | Front |
Drive Type : | Rear Wheel |
Body / Chassis : | Separate body and frame |
Production Years for Series : | 1998 - |
Price : | $22,825-$24,730 |
Weight : | 3920 lbs | 1778.082 kg |
Performance
0-60 mph : | 9.2 seconds. |
Engine & Transmission
V 8 | |
---|---|
Displacement : | 4605 cc | 281.0 cu in. | 4.6 L. |
Power : | 200 HP (147.2 KW) @ 4250 RPM |
Torque : | 275 Ft-Lbs (373 NM) @ 3000 RPM |
Bore : | 3.6 in | 91 mm. |
Stroke : | 3.6 in | 91 mm. |
Compression : | 9.0:1 |
Sequential Fuel Injection |
4 Automatic with Overdrive
Production Figures
Total 1999 Grand Marquis production : | 122,582 |
1999 Mercury Grand Marquis |
Handling
Recall
Component | STEERING |
---|---|
Manufacturer | Dorman Products, Inc. |
NHTSA Campaign ID | 15E082000 |
Summary | Dorman Products, Inc. (Dorman) is recalling certain model Dorman Steering Shafts, part number 425-359, Solutions Steering Shafts, part number 7-0359, and OE Solutions Steering Shafts, part number 425-359, manufactured April 17, 2014, to September 28, 2015. These aftermarket replacement steering shafts are sold for use in 1995-2002 Ford Crown Victoria, Mercury Grand Marquis, and Lincoln Town Car vehicles. These steering shafts may separate during operation if the integral fastener is loose or missing and if the interfacing vehicle shaft is compressed in length. |
Consequence | If the shafts separate during vehicle operation, a loss of steering control would result, increasing the risk of a vehicle crash. |
Remedy | Dorman will notify owners, and dealers will replace the steering shaft, free of charge. The recall began on October 28, 2015. Owners may contact Dorman customer service at 1-800-523-2492, option 5. |
Notes | Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
Component | FUEL SYSTEM, GASOLINE |
---|---|
Manufacturer | UFI FILTERS USA |
NHTSA Campaign ID | 06E056000 |
Summary | CERTAIN AFTERMARKET FUEL FILTERS SOLD UNDER THE PUROLATOR BRAND NAME, P/N F65277, SHIPPED FROM JANUARY 16 THROUGH JUNE 2, 2006, FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. DUE TO INCORRECT DESIGN, THE QUICK CONNECTORS MAY NOT FULLY SEAT WITH THE TUBE INTERFACE, EVEN THOUGH THE PERSON MAKING THE CONNECTION MAY BELIEVE THAT THE QUICK CONNECTOR IS FULLY ATTACHED. |
Consequence | FAILURE OF THIS CONNECTION COULD LEAD TO FUEL SPILLAGE AND, IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR. |
Remedy | UFI WILL NOTIFY OWNERS AND REPLACE THE FILTERS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 4, 2006. OWNERS MAY CONTACT UFI FILTERS USA AT 800-230-5876. |
Notes | THIS RECALL ONLY PERTAINS TO UFI FILTERS USA (PUROLATOR) AFTERMARKET FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
Component | SEAT BELTS:FRONT:ANCHORAGE |
---|---|
Manufacturer | FORD MOTOR COMPANY |
NHTSA Campaign ID | 00V157001 |
Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES USING AFTERMARKET DRIVER'S SEAT BELT ASSEMBLIES THAT WERE SOLD BY FORD PARTS DEPARTMENTS FROM JANUARY 1, THROUGH JUNE 13, 2000. THESE SEAT BELT ASSEMBLIES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 209, 'SEAT BELT ASSEMBLIES.' THE EQUIPMENT INVOLVED IS SERVICE STOCK SEAT BELT ASSEMBLIES, MODEL NOS. H 9977, H 9979, T 9063, AND T 9217, BUILT BY TRW VEHICLE SAFETY SYSTEMS, INC. (TRW) MANUFACTURED FROM JUNE 1, 1998 THROUGH MAY 21, 2000. SOME OF THESE SEAT BELT ASSEMBLIES MAY HAVE BEEN INSTALLED AS SERVICE REPLACEMENT EQUIPMENT ON THE VEHICLES INVOLVED IN THE RECALL. |
Consequence | IN THE EVENT OF A COLLISION, THESE SEAT BELTS MAY NOT RESTRAIN AN OCCUPANT INCREASING THE RISK OF INJURY. |
Remedy | DEALERS WILL INSPECT THESE VEHICLES AND REPLACE THE SERVICE SEAT BELT ASSEMBLIES THAT WERE INSTALLED IN THESE VEHICLES FROM JANUARY 1 THROUGH JUNE 13, 2000. |
Notes | OWNER NOTIFICATION BEGAN SEPTEMBER 28, 2000. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Component | SEAT BELTS:FRONT:ANCHORAGE |
---|---|
Manufacturer | FORD MOTOR COMPANY |
NHTSA Campaign ID | 00V157002 |
Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES USING AFTERMARKET FRONT PASSENGER SIDE SEAT BELT ASSEMBLIES THAT WERE SOLD BY FORD PARTS DEPARTMENTS FROM JANUARY 1, THROUGH JUNE 13, 2000. THESE SEAT BELT ASSEMBLIES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 209, 'SEAT BELT ASSEMBLIES.' THE EQUIPMENT INVOLVED IS SERVICE STOCK SEAT BELT ASSEMBLIES, MODEL NOS. H 9977, H 9979, T 9063, AND T 9217, BUILT BY TRW VEHICLE SAFETY SYSTEMS, INC. (TRW) MANUFACTURED FROM JUNE 1, 1998 THROUGH MAY 21, 2000. SOME OF THESE SEAT BELT ASSEMBLIES MAY HAVE BEEN INSTALLED AS SERVICE REPLACEMENT EQUIPMENT ON THE VEHICLES INVOLVED IN THE RECALL. |
Consequence | IN THE EVENT OF A COLLISION, THESE SEAT BELTS MAY NOT RESTRAIN AN OCCUPANT INCREASING THE RISK OF INJURY. |
Remedy | DEALERS WILL INSPECT THESE VEHICLES AND REPLACE THE SERVICE SEAT BELT ASSEMBLIES THAT WERE INSTALLED IN THESE VEHICLES FROM JANUARY 1 THROUGH JUNE 13, 2000. |
Notes | OWNER NOTIFICATION BEGAN SEPTEMBER 28, 2000. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Component | EQUIPMENT:MECHANICAL:INTEGRATED JACK/LEVELER/STABILIZER |
---|---|
Manufacturer | FORD MOTOR COMPANY |
Mfr Report Date | 19970618 |
NHTSA Campaign ID | 00V200000 |
Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES HAVE JACKING INSTRUCTIONS WHICH, IF FOLLOWED, COULD CAUSE THE VEHICLE OPERATOR TO PLACE THE JACK ON A FRAME WELD WHEN ATTEMPTING TO RAISE A REAR WHEEL. IF THE VEHICLE IS JACKED UP WITH THE JACK PLACED ON THE FRAME WELD AND IF THE VEHICLE IS FREE TO ROLL (WHEELS NOT BLOCKED OR CHOCKED), THE JACK COULD YIELD AND THE VEHICLE MAY DROP SUDDENLY. |
Consequence | IF THIS OCCURS AND ANY PORTION OF THE OPERATOR'S BODY IS UNDER THE VEHICLE, THE POTENTIAL FOR PERSONAL INJURY EXISTS. |
Remedy | OWNERS WILL BE PROVIDED WITH A REVISED JACK INSTRUCTION AND STOWAGE CARD AND JACK WARNING LABEL, AS WELL AS A SUPPLEMENT TO THE OWNER GUIDE. |
Notes | OWNER NOTIFICATION BEGAN AUGUST 3, 2000.OWNERS WHO DO NOT RECEIVE THE FREE INSTRUCTIONS AND LABEL WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Data updated June 2024
1999 Averages
Avg. Car Cost : | $21,050 |
Avg. Household Income : | $40,810 |
Avg. Home : | $131,750 |
Avg. Gallon of Gas : | $1.22 |
Avg. Stamp : | $0 |
1999 Mercury Grand Marquis FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1999 Mercury Grand Marquis?
Q: What is the wheelbase size of the 1999 Mercury Grand Marquis? A: The 1999 Mercury Grand Marquis has a wheelbase size of 114.40 inches.Q: What is the length of the 1999 Mercury Grand Marquis? A: The 1999 Mercury Grand Marquis has a length of 212.00 inches.Q: What is the width of the 1999 Mercury Grand Marquis? A: The 1999 Mercury Grand Marquis has a width of 78.20 inches.Q: How much did the 1999 Mercury Grand Marquis cost when new?A: The 1999 Mercury Grand Marquis cost approximately $22,825 to $24,730 (USD) when new.Q: What were the bodystyles of the 1999 Mercury Grand Marquis? A: The 1999 Mercury Grand Marquis was offered as a GS Sedan, LS Sedan.Q: How many 1999 Grand Marquiss were produced? A: Mercury produced 122,582 examples of the Grand Marquis in 1999.Q: What engine did the 1999 Mercury Grand Marquis have? A: The engine powering the 1999 Mercury Grand Marquis was a V 8 (4605 cc | 281.0 cu in. | 4.6 L.) with 200 HP (147.2 KW) @ 4250 RPM and 275 Ft-Lbs (373 NM) @ 3000 RPM. Q: What transmission did the 1999 Mercury Grand Marquis have? A: The 1999 Mercury Grand Marquis had a 4 speed Automatic with Overdrive gearbox.
What are the dimension and mechanical specifications of the 1999 Mercury Grand Marquis?
How many 1999 Mercury Grand Marquis were produced?
How powerful was the 1999 Mercury Grand Marquis? Was the 1999 Mercury Grand Marquis popular? Was the 1999 Mercury Grand Marquis expensive? What was the fuel economy of the 1999 Mercury Grand Marquis?
Q: What is the wheelbase size of the 1999 Mercury Grand Marquis? A: The 1999 Mercury Grand Marquis has a wheelbase size of 114.40 inches.Q: What is the length of the 1999 Mercury Grand Marquis? A: The 1999 Mercury Grand Marquis has a length of 212.00 inches.Q: What is the width of the 1999 Mercury Grand Marquis? A: The 1999 Mercury Grand Marquis has a width of 78.20 inches.Q: How much did the 1999 Mercury Grand Marquis cost when new?A: The 1999 Mercury Grand Marquis cost approximately $22,825 to $24,730 (USD) when new.Q: What were the bodystyles of the 1999 Mercury Grand Marquis? A: The 1999 Mercury Grand Marquis was offered as a GS Sedan, LS Sedan.Q: How many 1999 Grand Marquiss were produced? A: Mercury produced 122,582 examples of the Grand Marquis in 1999.Q: What engine did the 1999 Mercury Grand Marquis have? A: The engine powering the 1999 Mercury Grand Marquis was a V 8 (4605 cc | 281.0 cu in. | 4.6 L.) with 200 HP (147.2 KW) @ 4250 RPM and 275 Ft-Lbs (373 NM) @ 3000 RPM. Q: What transmission did the 1999 Mercury Grand Marquis have? A: The 1999 Mercury Grand Marquis had a 4 speed Automatic with Overdrive gearbox. - 1999 Mercury Grand Marquis Menu
- Article
- Image gallery
- Valuation
- Specifications
- Recalls
- Accessories