These are standard specifications for the 1989 Mazda 323, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
4 Manual
Information provided by NHTSA
Data updated January 2023
Features
Engine Location : | Front |
Drive Type : | Front Wheel (standard), 4WD |
Body / Chassis : | Steel unibody |
Price : | $6,000-$12,000 |
Weight : | 2100 lbs | 952.544 kg |
Engine & Transmission
Inline 4 | |
---|---|
Displacement : | 1597 cc | 97.5 cu in. | 1.6 L. |
Power : | 82 BHP (60.352 KW) @ 5000 RPM |
Torque : | 92 Ft-Lbs (125 NM) @ 2500 RPM |
Bore : | 3.1 in | 78 mm. |
Stroke : | 3.3 in | 84 mm. |
Compression : | 9.3:1 |
Multi-point Electronic Fuel Injection |
4 Manual
Production Figures
Total Mazda Production for 1989 : | 263,378 |
1989 Mazda 323 |
Handling
Recall
Component | SEAT BELTS:FRONT:BUCKLE ASSEMBLY |
---|---|
Manufacturer | MAZDA (NORTH AMERICA),INC |
NHTSA Campaign ID | 95V103005 |
Summary | THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED 'PRESS.' IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY. |
Consequence | THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH. |
Remedy | OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN. |
Notes | SYSTEM: INTERIOR; SEAT BELTS; BELT BUCKLES.VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH SAFETY BELTS MADE BY TAKATA CORPORATION.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPONSERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME, PLEASE CONTACT MAZDA AT 1-800-222-5500. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
Data updated January 2023
1989 Averages
Avg. Car Cost : | $15,350 |
Avg. Household Income : | $27,450 |
Avg. Home : | $120,000 |
Avg. Gallon of Gas : | $0.97 |
Avg. Stamp : | $0 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1989 Mazda 323?
Q: What is the wheelbase size of the 1989 Mazda 323? A: The 1989 Mazda 323 has a wheelbase size of 94.50 inches.Q: What is the length of the 1989 Mazda 323? A: The 1989 Mazda 323 has a length of 169.70 inches.Q: What is the width of the 1989 Mazda 323? A: The 1989 Mazda 323 has a width of 64.80 inches.Q: How much did the 1989 Mazda 323 cost when new?A: The 1989 Mazda 323 cost approximately $6,000 to $12,000 (USD) when new.Q: What were the bodystyles of the 1989 Mazda 323? A: The 1989 Mazda 323 was offered as a HatchBack, Sedan, Sport Sedan, Station Wagon.Q: How many vehicles did Mazda produce in 1989? A: Mazda produced 263,378 automobiles in 1989.Q: What engine did the 1989 Mazda 323 have? A: The engine powering the 1989 Mazda 323 was a Inline 4 (1597 cc | 97.5 cu in. | 1.6 L.) with 82 BHP (60.352 KW) @ 5000 RPM and 92 Ft-Lbs (125 NM) @ 2500 RPM. Q: What transmission did the 1989 Mazda 323 have? A: The 1989 Mazda 323 had a 4 speed Manual gearbox.
What are the dimension and mechanical specifications of the 1989 Mazda 323?
How many 1989 Mazda 323 were produced?
How powerful was the 1989 Mazda 323? Was the 1989 Mazda 323 popular? Was the 1989 Mazda 323 expensive? What was the fuel economy of the 1989 Mazda 323?
Q: What is the wheelbase size of the 1989 Mazda 323? A: The 1989 Mazda 323 has a wheelbase size of 94.50 inches.Q: What is the length of the 1989 Mazda 323? A: The 1989 Mazda 323 has a length of 169.70 inches.Q: What is the width of the 1989 Mazda 323? A: The 1989 Mazda 323 has a width of 64.80 inches.Q: How much did the 1989 Mazda 323 cost when new?A: The 1989 Mazda 323 cost approximately $6,000 to $12,000 (USD) when new.Q: What were the bodystyles of the 1989 Mazda 323? A: The 1989 Mazda 323 was offered as a HatchBack, Sedan, Sport Sedan, Station Wagon.Q: How many vehicles did Mazda produce in 1989? A: Mazda produced 263,378 automobiles in 1989.Q: What engine did the 1989 Mazda 323 have? A: The engine powering the 1989 Mazda 323 was a Inline 4 (1597 cc | 97.5 cu in. | 1.6 L.) with 82 BHP (60.352 KW) @ 5000 RPM and 92 Ft-Lbs (125 NM) @ 2500 RPM. Q: What transmission did the 1989 Mazda 323 have? A: The 1989 Mazda 323 had a 4 speed Manual gearbox. Similarly Sized Vehicles
from 1989
Mazda Monthly Sales Volume
March 2024
37,119
February 2024
32,705
January 2024
30,279
December 2023
39,518
November 2023
27,715
October 2023
23,504
September 2023
28,031
August 2023
30,174
June 2023
29,786
May 2023
33,262
April 2023
32,351
March 2023
34,778