conceptcarz.com

Mazda Recall Information

Year :
Manufacturer :

Recent Recall News

Daytime Running Lights May Fail

WASHINGTON, DC (February 2, 2020) – Mazda North American Operations has filed a Part 573 defect notification with the National Highway Traffic Safety Administration (NHTSA) for a safety defect, which exists in certain 2016 Model Year Mazda CX-5 vehicles. In the affected vehicles, the LED-type daytime running lights may flicker or fail to illuminate while driving.

Due to an inappropriate material specification of the sealing gasket attached to t....
WASHINGTON, DC (November 26, 2019) – Mazda North American Operations has filed a Part 573 with the National Highway Traffic Safety Administration (NHTSA) for a safety defect, which exists in vehicles equipped with a certain type of passenger frontal air bag inflator, for certain 2009-2012 Mazda6, 2007-2012 CX-7 and 2007-2012 CX-9 vehicles. There are 69,879 U.S. and U.S. Territory vehicles involved in this recall. This recall is an expansion of Safety Recall 1317F – Passenger Air Bag Infla....
Vehicle Instability Due to Partial Tire Tread Separation

WASHINGTON, DC (November 5, 2019) – Mazda North American Operations has filed a Part 573 notification with the National Highway Traffic Safety Administration (NHTSA) for a safety defect on certain 2019 Model Year CX-9 vehicles. In the manufacturing process, rubber compound used for prototype production was accidentally mixed into rubber compound for standard production, which causes tire tread strength to diminish.

If t....
Undercover Separation Concern

WASHINGTON, DC (July 22, 2019) – Mazda North American Operations has filed a Part 573 notification with the National Highway Traffic Safety Administration (NHTSA) for a safety defect on certain 2016 Model Year Mazda MX-5 Miata vehicles. During normal use, an undercover and related metal bracket may separate from the vehicle while driving. Mazda's recall number is 3619F.

Improper maintenance of a weld contact pin of the spot friction welding mach....
WASHINGTON, DC (July 1, 2019) – Mazda North American Operations has filed a Part 573 notification with the National Highway Traffic Safety Administration (NHTSA) for a safety defect on certain 2018 MY Mazda CX-9 vehicles, produced from September 12, 2017, through November 9, 2017, affecting 7,854 U.S. vehicles.

In certain Mazda CX-9 vehicles, malfunctions can occur in the passenger frontal air bag system, turn signals, and/or the engine starting system in addition to false instrument c....
Side Curtain Air Bag May Not Unfold Properly

WASHINGTON, D.C. (June 22, 2018) – Mazda North American Operations filed a Part 573 with NHTSA regarding a safety concern with certain Model Year 2018 Mazda CX-5 vehicles. Due to an inappropriate manufacturing process during the production of certain curtain air bags, the air bags may not unfold properly during deployment. This may result in an increased risk of injury to a passenger in a crash where the curtain air bag deploys during....
Washington, DC (January 17, 2018) – Mazda has filed two Part 573 notifications with the National Highway Traffic Safety Administration (NHTSA) for two new recalls on the B-Series Truck with Takata airbag inflators.

A separate group of 2006MY B-Series vehicles have been identified as containing Takata driver side frontal air bags that show a far higher risk of ruptures during air bag deployment than for other recalled Takata air bags. Recall 2218A (NHTSA number 18V038) which issues a 's....
WASHINGTON, D.C. (November 28, 2017) – Mazda North American Operations filed a Part 573 with NHTSA regarding a safety concern with certain Model Year 2017 CX-5 Vehicles. On 2017 MY CX-5 vehicles with a genuine Mazda accessory trailer hitch harness installed, due to inappropriate routing of the harness, there may be insufficient clearance between the harness and main exhaust silencer. If the exhaust silencer makes contact with the harness while driving, harness damage may eventually occur ....
WASHINGTON, D.C. (November 28, 2017) – Mazda North American Operations filed a Part 573 with NHTSA regarding a safety concern with certain Model Year 2018 Mazda3 vehicles. In certain vehicles, an incorrect exhaust valve spring may have been installed in the cylinder head of the engine. Continuous use in this condition may lead to abnormal noise, vibration and MIL-illumination. In the worst case, the exhaust valve spring may break, resulting in engine stall and the vehicle cannot be restar....
WASHINGTON, DC (September 8, 2016) – On September 6, Mazda Motor Corporation filed a safety defect report with the National Highway Traffic Safety Administration (NHTSA) to address a concern with certain CX-3, Mazda3, Mazda5 and CX-5 vehicles.

On the affected vehicles, insufficient corrosion protective coating was applied to the ends of the external cylinders of the rear hatch/lift gate gas stay dampers (lift supports). If water containing road salt enters, it can cause corrosion. Over....
WASHINGTON, DC (September 6, 2016) – On August 10, 2016, Mazda Motor Corporation filed a safety defect report with the National Highway Traffic Safety Administration (NHTSA) to address a concern with certain 2009-2010 Mazda6 vehicles.

On the affected Mazda6 vehicles, due to insufficient protective coating on the air bag control unit power supply, moisture could enter the unit and cause corrosion, causing the unit to malfunction and turning on the air bag warning light. Continued drivin....
• Repairing recalled vehicles is the key goal

IRVINE, Calif. (August 30, 2016) –There is a heightened public awareness of automotive recalls, but recall repairs remain comparatively low. In an effort to increase recall completions, Mazda North American Operations (MNAO) has launched the new Mazda Recall Information Center – www.MazdaRecallinfo.com. The Recall Information Center will help customers easily confirm if their vehicle is affected by a recall, and provide a convenient wa....
WASHINGTON, DC (May 4, 2016) – Mazda is currently investigating the vehicle population affected by today's announcement by Takata that it is expanding its driver and passenger frontal airbag inflator recall.

None of the 2016 model year Mazda vehicles contain Takata driver or passenger frontal airbag inflators.

Mazda North American Operations is headquartered in Irvine, Calif., and oversees the sales, marketing, parts and customer service support of Mazda vehicles in the United State....
WASHINGTON, DC (April 8, 2016) – Today, Mazda Motor Corporation filed a safety defect report with the National Highway Traffic Safety Administration (NHTSA) to address a concern with certain 2013-2016 Model Year (MY) vehicles.

Under certain conditions of under-torque detection, the automatic tightening system may not tighten the front strut assembly lower mounting nuts and bolts to the proper torque specification. A separation of the front strut and steering knuckle can cause signific....
WASHINGTON, DC (February 1, 2016) – Mazda has decided to recall all 2004–2006 model year B-Series Trucks with Takata driver-side frontal air bag inflators. Approximately 19,000 vehicles are affected in the U.S., Puerto Rico and Saipan.

There have been no reports of accidents or injuries on the Mazda-badged vehicles subject to this recall.

Model Year 2007-2009 B-Series Trucks with Takata passenger-side frontal air bag inflators are part of a previous recall. Approximately 19,000 vehi....