1975 Fiat X1/9 Specifications

1975 Fiat X1/9
1975 Fiat X1/9 Model Years

Engine Location : Mid
Drive Type : Rear Wheel
Body / Chassis : Steel unibody
Production Years for Series : 1972 - 1989
Body Designer : Bertone
Price : $4,600
Weight : 2100 lbs | 952.544 kg
Inline 4
Displacement : 1290 cc | 78.7 cu in. | 1.3 L.
Power : 61.50 SAE @ 5800 RPM
Torque :67 Ft-Lbs (91 NM) @ 4000 RPM
Bore : 3.4 in | 86 mm.
Stroke : 2.2 in | 56 mm.
Compression : 8.5:1
Main Bearings : 5
Cylinder Block : Cast-iron
Cylinder Head : Aluminum
2-barrel carburetor
Transmission:
Manual

Total Fiat Production for 1975 : 45,469
1975 Fiat X1/9
Targa Coupe 2 dr. 2 P : 17,360
Component

VEHICLE SPEED CONTROL

Manufacturer

FIAT MOTORS OF N.A., INC.

NHTSA Campaign ID75V173000
NotesFIAT CAMPAIGN NO N/A.POSSIBILITY THAT THE ACCELERATOR CABLE WAS INSTALLED INA MANNER WHICH WOULD CAUSE THE ACCELERATOR ASSEMBLY TO FUNCTION ABNORMALLY,CAUSING BREAKAGE OF THE ACCELERATOR CABLE.IF THIS CONDITION EXISTS, THEENGINE WILL IDLE AND CAR WILL DECELERATE AND DANGER OF VEHICLE CRASH WILLEXIST.(CORRECT BY INSPECTING AND INSTALLING COMPLETE NEW ACCELERATORASSEMBLY).

Information provided by NHTSA
Data updated June 2024
1975 Averages
Avg. Car Cost : $4,250
Avg. Household Income : $14,100
Avg. Home : $39,300
Avg. Gallon of Gas : $0.44

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1975 Fiat X1/9?
How many 1975 Fiat X1/9 were produced?
How powerful was the 1975 Fiat X1/9? Was the 1975 Fiat X1/9 popular? Was the 1975 Fiat X1/9 expensive? What was the fuel economy of the 1975 Fiat X1/9?

Q: What is the wheelbase size of the 1975 Fiat X1/9? A: The 1975 Fiat X1/9 has a wheelbase size of 86.70 inches.

Q: What is the length of the 1975 Fiat X1/9? A: The 1975 Fiat X1/9 has a length of 158.50 inches.

Q: What is the width of the 1975 Fiat X1/9? A: The 1975 Fiat X1/9 has a width of 61.80 inches.

Q: How much did the 1975 Fiat X1/9 cost when new?A: The 1975 Fiat X1/9 had a base price of approximately $4,600 (USD).

Q: What is the bodystyle of the 1975 Fiat X1/9? A: The 1975 Fiat X1/9 was a Targa Coupe.

Q: How many vehicles did Fiat produce in 1975? A: Fiat produced 45,469 automobiles in 1975.

Q: What engine did the 1975 Fiat X1/9 have? A: The engine powering the 1975 Fiat X1/9 was a Inline 4 (1290 cc | 78.7 cu in. | 1.3 L.) with 61.50 SAE @ 5800 RPM and 67 Ft-Lbs (91 NM) @ 4000 RPM.

Q: What transmission did the 1975 Fiat X1/9 have? A: The 1975 Fiat X1/9 had a Manual gearbox.

Vehicle information, history, and specifications from concept to production.