1991 Chevrolet Camaro Specifications

These are standard specifications for the 1991 Chevrolet Camaro, not necessarily specifications for the vehicle(s) in the photo(s).

Features

Engine Location :	Front
Drive Type :	Rear Wheel
Body / Chassis :	Unibody
Production Years for Series :	1982 - 1992
Price :	$12,200-$183,005
Weight :	3100 lbs \| 1406.136 kg

Engine & Transmission

V 6
Displacement :	3130 cc \| 191.0 cu in. \| 3.1 L.
Power :	140 BHP (103.04 KW) @ 4400 RPM
Torque :	180 Ft-Lbs (244 NM) @ 3800 RPM
Bore :	3.5 in \| 89 mm.
Stroke :	3.3 in \| 84 mm.
Compression :	8.8:1
Valvetrain :	16 DOHC (2.66666666666667 valves per cylinder)
Construction :	Cast-iron block and head
Port fuel injection

V 8
Displacement :	4998 cc \| 305.0 cu in. \| 5.0 L.
Power :	170 BHP (125.12 KW) @ 4000 RPM
Torque :	255 Ft-Lbs (346 NM) @ 2400 RPM
Bore :	3.7 in \| 95 mm.
Stroke :	3.5 in \| 88 mm.
Construction :	Cast-iron block and head
Electronic fuel injection

V 8 90-degree
Displacement :	4998 cc \| 305.0 cu in. \| 5.0 L.
Power :	230 BHP (169.28 KW) @ 4400 RPM
Torque :	255 Ft-Lbs (346 NM) @ 2400 RPM
Bore :	3.7 in \| 95 mm.
Stroke :	3.5 in \| 88 mm.
Compression :	9.3:1
Construction :	Cast-iron block and head
Port fuel injection

V 8 90-degree
Displacement :	5735 cc \| 350.0 cu in. \| 5.7 L.
Power :	245 BHP (180.32 KW) @ 4400 RPM
Torque :	345 Ft-Lbs (468 NM) @ 3200 RPM
Bore :	4.0 in \| 102 mm.
Stroke :	3.5 in \| 88 mm.
Compression :	9.3:1
Valvetrain :	16 OHV (2 valves per cylinder)
Construction :	Cast-iron block and head
Tuned Port Fuel Injection System

Transmission:
5 Manual , 4 Automatic

Production Figures

Total Chevrolet Production for 1991 :	895,569
Total 1991 Camaro production :	100,838
1991 Chevrolet Camaro
RS Convertible 2 dr. 4 P :	8,532
RS Sport Coupe 2 dr. 4 P :	92,306
Z28 Convertible 2 dr. 4 P :	8,532
Z28 Sport Coupe 2 dr. 4 P :	92,306

Dimension(s)

RS Sport Coupe

Exterior
Fuel Capacity :	15.5 Gal
Seating Capacity :	4
Doors :	2
Length :	192.0 in \| 4877 mm.
Width :	72.8 in \| 1849 mm.
Height :	50.0 in \| 1270 mm.
Wheelbase :	101.0 in \| 2565 mm.
Front Track :	60.0 in \| 1524 mm.
Rear Track :	60.9 in \| 1547 mm.

RS Convertible

Chassis # 1G1FP33E9ML124618

Exterior
Price :	$13,000
Weight :	3200 lbs \| 1451.496 kg
Fuel Capacity :	15.5 Gal
Seating Capacity :	4
Doors :	2
Length :	192.0 in \| 4877 mm.
Width :	72.8 in \| 1849 mm.
Height :	50.0 in \| 1270 mm.
Wheelbase :	101.0 in \| 2565 mm.
Front Track :	60.0 in \| 1524 mm.
Rear Track :	60.9 in \| 1547 mm.

Z28 Sport Coupe

Chassis # Riley & Scott TA 91-02

Exterior
Price :	$18,000
Weight :	3000 lbs \| 1360.777 kg
Fuel Capacity :	15.5 Gal
Seating Capacity :	4
Doors :	2
Length :	192.0 in \| 4877 mm.
Width :	72.8 in \| 1849 mm.
Height :	50.0 in \| 1270 mm.
Wheelbase :	101.0 in \| 2565 mm.
Front Track :	60.0 in \| 1524 mm.
Rear Track :	60.9 in \| 1547 mm.

Z28 Convertible

Chassis # 1G1FP33F8ML186875
View info And history
Auction entries : 1

Chassis # 1G1FP33F7ML128594
View info And history

Exterior
Price :	$183,005
Weight :	3500 lbs \| 1587.573 kg
Fuel Capacity :	15.5 Gal
Seating Capacity :	4
Doors :	2
Length :	192.0 in \| 4877 mm.
Width :	72.8 in \| 1849 mm.
Height :	50.0 in \| 1270 mm.
Wheelbase :	101.0 in \| 2565 mm.
Front Track :	60.0 in \| 1524 mm.
Rear Track :	60.9 in \| 1547 mm.

Handling

Suspension
Front : Modified springs and stabilizer bar Rear : Salisbury axle and torque arm with ICA, coil springs and track bar

Steering
Recirculating Ball

Tires / Wheels
Tires :	P215/65R15 steel-belted radial tires

Recall

Component	EQUIPMENT
Manufacturer	HONEYWELL INTERNATIONAL, INC.
NHTSA Campaign ID	07E088000
Summary	CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
Consequence	THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
Remedy	HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
Notes	CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component	EXTERIOR LIGHTING
Manufacturer	PRO-A MOTORS, INC.
NHTSA Campaign ID	06E026000
Summary	CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Consequence	WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
Remedy	PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
Notes	THIS RECALL ONLY PERTAINS TO PRO-A MOTORS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component	FUEL SYSTEM, GASOLINE
Manufacturer	HONEYWELL INTERNATIONAL, INC.
NHTSA Campaign ID	06E043000
Summary	CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON 'DOCUMENT SEARCH' AND THEN 'BUS APPLICATIONS'). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
Consequence	THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.
Remedy	HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).
Notes	THIS RECALL ONLY PERTAINS TO AFTERMARKET FRAM FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE VEHICLES LISTED.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component	SEAT BELTS:FRONT:ANCHORAGE
Manufacturer	GENERAL MOTORS CORP.
NHTSA Campaign ID	91V067000
Summary	THE METAL LATCHPLATES MAY NOT ENGAGE THE BUCKLE ASSEMBLIES, CAUSING A 'NO LATCH' CONDITION. MOVEMENT OF THE SEAT OCCUPANT IN THIS CONDITION COULD CAUSE LATCHPLATE RELEASE FROM THE BUCKLE.
Consequence	UNBELTED OR INCORRECTLY BELTED SEAT OCCUPANTS ARESUBJECTED TO INCREASED RISK OF INJURY IN THE EVENT OF SUDDEN STOP OR ACCIDENT.
Remedy	REPLACE THE RETRACTOR ASSEMBLY FOR THE SAFETY BELT (FRONT AND REAR IN COUPES AND FRONT ONLY IN CONVERTIBLES).
Notes	SYSTEM: SAFETY BELT ASSEMBLY; FMVSS 209.VEHICLE DESCRIPTION: PASSENGER CARS; COUPES AND CONVERTIBLES.

Component	FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
Manufacturer	GENERAL MOTORS CORP.
Mfr Report Date	19891001
NHTSA Campaign ID	94V077000
Summary	THE FUEL FILLER NECK SOLDER JOINT CAN DEVELOP CRACKS OR PIN HOLE LEAKS, WHICH DOES NOT COMPLY WITH FMVSS NO. 301, 'FUEL SYSTEM INTEGRITY.' THE CRACKS AND HOLES CAN ALLOW FUEL VAPOR AND FUEL LEAKAGE.
Consequence	CONSEQUENCE OF NON-COMPLIANCE: GASOLINE VAPORS AND FUEL LEAKS CAN RESULT IN A FIRE IF EXPOSED TO A SOURCE OF IGNITION.
Remedy	DEALERS WILL INSPECT THE FUEL TANK ASSEMBLY AND REPLACE THOSE WHICH EXHIBIT THE CRACKS OR PIN HOLE LEAKS.
Notes	SYSTEM: FUEL; FUEL TANK ASSEMBLY; PIPE; FILLER; NECK; FMVSS 301.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE AMOUNT OF TIME OR THE REMEDY DOES NOT CORRECT THE NONCOMPLIANCE, PLEASE CONTACT CHEVROLET AT1-800-222-1020 OR PONTIAC AT 1-800-762-2737. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

Component	VISIBILITY:WINDSHIELD
Manufacturer	GENERAL MOTORS CORP.
Mfr Report Date	19901201
NHTSA Campaign ID	91V031000
Summary	POOR BOND ADHESION BETWEEN THE WINDSHIELD GLASS AND THE MOUNTING, WHICH COULD ALLOW THE WINDSHIELD TO SEPARATE FROM THE VEHICLE DURING A COLLISION. THIS FAILS TO CONFORM WITH FMVSS 212.
Consequence	IF WINDSHIELD SEPARATION OCCURS IN A COLLISION, ANUNBELTED OCCUPANT COULD BE EJECTED FROM THE VEHICLE, AND PERSONAL INJURY COULDOCCUR.
Remedy	REMOVE ALL SEALER FROM WINDSHIELD AND MOUNTING; APPLY NEW BONDING AND SEALANT MATERIAL, AND REINSTALL WINDSHIELD.
Notes	SYSTEM: WINDSHIELD MOUNTING; FMVSS 212.VEHICLE DESCRIPTION: PASSENGER CARS.

Component	SEATS:FRONT ASSEMBLY:RECLINER
Manufacturer	GENERAL MOTORS CORP.
Mfr Report Date	19910401
NHTSA Campaign ID	91V074000
Summary	THE FRONT SEAT UPPER HINGE COVER SCREWS ARE TOO LONG, AND INTERFERE WITH THE SEAT BACK INERTIA LOCK. THIS PREVENTS THE SEAT BACK FROM LOCKING PROPERLY.
Consequence	IN THE EVENT OF A SUDDEN STOP OR VEHICLE IMPACT, ANUNLOCKED SEAT BACK WOULD INCREASE THE RISK OF INJURY TO THE SEAT OCCUPANT.
Remedy	REPLACE SCREWS SECURING UPPER HINGE TRIM COVER WITH CORRECT LENGTH SCREWS.
Notes	SYSTEM: FRONT BUCKET SEAT LATCH; FMVSS 207.VEHICLE DESCRIPTION: PASSENGER CARS.

Information provided by NHTSA
Data updated January 2023

1991 Averages

Avg. Household Income :	$29,430
Avg. Home :	$120,000
Avg. Gallon of Gas :	$1.12

1991 Chevrolet Camaro FAQs (show)

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1991 Chevrolet Camaro?
How many 1991 Chevrolet Camaro were produced?
How powerful was the 1991 Chevrolet Camaro? Was the 1991 Chevrolet Camaro popular? Was the 1991 Chevrolet Camaro expensive? What was the fuel economy of the 1991 Chevrolet Camaro?

Q: What is the wheelbase size of the 1991 Chevrolet Camaro? A: The 1991 Chevrolet Camaro has a wheelbase size of 101.00 inches.

Q: What is the length of the 1991 Chevrolet Camaro? A: The 1991 Chevrolet Camaro has a length of 192.00 inches.

Q: What is the width of the 1991 Chevrolet Camaro? A: The 1991 Chevrolet Camaro has a width of 72.80 inches.

Q: How much did the 1991 Chevrolet Camaro cost when new?A: The 1991 Chevrolet Camaro cost approximately $12,200 to $183,005 (USD) when new.

Q: What were the bodystyles of the 1991 Chevrolet Camaro? A: The 1991 Chevrolet Camaro was offered as a RS Convertible, RS Sport Coupe, Z28 Convertible, Z28 Sport Coupe.

Q: What tires did the 1991 Chevrolet Camaro have? A: The 1991 Chevrolet Camaro had P215/65R15 steel-belted radial tires tires.

Q: How many vehicles did Chevrolet produce in 1991? A: Chevrolet produced 895,569 automobiles in 1991.

Q: How many 1991 Camaros were produced? A: Chevrolet produced 100,838 examples of the Camaro in 1991.

Q: What engines did the 1991 Chevrolet Camaro have? A: The 1991 Chevrolet Camaro had the following engine options: V 6 (3130 cc | 191.0 cu in. | 3.1 L.) with 140 BHP (103.04 KW) @ 4400 RPM and 180 Ft-Lbs (244 NM) @ 3800 RPM

V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 170 BHP (125.12 KW) @ 4000 RPM and 255 Ft-Lbs (346 NM) @ 2400 RPM

V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 230 BHP (169.28 KW) @ 4400 RPM and 255 Ft-Lbs (346 NM) @ 2400 RPM

V 8 (5735 cc | 350.0 cu in. | 5.7 L.) with 245 BHP (180.32 KW) @ 4400 RPM and 345 Ft-Lbs (468 NM) @ 3200 RPM

Q: What transmissions did the 1991 Chevrolet Camaro have? A: The 1991 Chevrolet Camaro had the following gearbox options: 5 speed Manual, 4 speed Automatic.

Chevrolet Monthly Sales Volume

March 2023

398,141

Additional Sales Volume Data

1991 Chevrolet Camaro Specifications

Features

Engine & Transmission

Production Figures

Dimension(s)

RS Sport Coupe

RS Convertible

Z28 Sport Coupe

Z28 Convertible

Handling

Recall

EQUIPMENT

HONEYWELL INTERNATIONAL, INC.

EXTERIOR LIGHTING

PRO-A MOTORS, INC.

FUEL SYSTEM, GASOLINE

HONEYWELL INTERNATIONAL, INC.

SEAT BELTS:FRONT:ANCHORAGE

GENERAL MOTORS CORP.

FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP

GENERAL MOTORS CORP.

VISIBILITY:WINDSHIELD

GENERAL MOTORS CORP.

SEATS:FRONT ASSEMBLY:RECLINER

GENERAL MOTORS CORP.

Chevrolet

Similar Automakers

Similarly Sized Vehiclesfrom 1991

Chevrolet Monthly Sales Volume

Similarly Sized Vehicles
from 1991