These are standard specifications for the 1968 ISO Fidia S4, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
4 Manual Borg Warner T-10
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Production Years for Series : | 1967 - 1975 |
| Body Designer : | Giorgetto Giugiaro |
| Price : | $13,875 |
| Weight : | 3740 lbs | 1696.435 kg |
Engine & Transmission
| V 8 90-degree | Corvette Turbofire | |
|---|---|
| Displacement : | 5359 cc | 327.0 cu in. | 5.4 L. |
| Power : | 350.00 SAE @ 5800 RPM |
| Torque : | 360 Ft-Lbs (488 NM) @ 3600 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.3 in | 83 mm. |
| Compression : | 11.0:1 |
| Main Bearings : | 5 |
| Construction : | Cast-iron block and head |
4 Manual Borg Warner T-10
Production Figures
| Fidia Production (1967-1975) : | 192 |
| 1968 ISO Fidia S4 | |
Dimension(s)
Sedan
| Body Designer : | Giorgetto Giugiaro |
| Seating Capacity : | 5 |
| Doors : | 4 |
| Exterior | |
|---|---|
| Length : | 195.7 in | 4971 mm. |
| Width : | 70.1 in | 1781 mm. |
| Height : | 52.0 in | 1321 mm. |
| Wheelbase : | 112.2 in | 2850 mm. |
| Front Track : | 55.5 in | 1410 mm. |
| Rear Track : | 55.5 in | 1410 mm. |
Handling
| Suspension | |
|---|---|
| Front : Wishbones and coil springs with anti-roll bar Rear : DeDion with twin parallel upper and lower radial arms and Panhard rod | |
| Steering | |
|---|---|
| Recirculating Ball |
| Brakes | |
|---|---|
| Front Brakes : | Dunlop hydraulic discs with servo assist |
| Tires / Wheels | |
|---|---|
| Tires : | Pirelli Cinturato HS 185VR15 |
| Wheels : | Disc; 6Lx15 |
1968 Averages
| Avg. Car Cost : | $2,822 |
| Avg. Household Income : | $7,850 |
| Avg. Home : | $14,950 |
| Avg. Gallon of Gas : | $0.34 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1968 ISO Fidia S4?
Q: What is the wheelbase size of the 1968 ISO Fidia S4? A: The 1968 ISO Fidia S4 has a wheelbase size of 112.20 inches.Q: What is the length of the 1968 ISO Fidia S4? A: The 1968 ISO Fidia S4 has a length of 195.70 inches.Q: What is the width of the 1968 ISO Fidia S4? A: The 1968 ISO Fidia S4 has a width of 70.10 inches.Q: How much did the 1968 ISO Fidia S4 cost when new?A: The 1968 ISO Fidia S4 had a base price of approximately $13,875 (USD).Q: What is the bodystyle of the 1968 ISO Fidia S4? A: The 1968 ISO Fidia S4 was a Sedan.Q: What tires did the 1968 ISO Fidia S4 have? A: The 1968 ISO Fidia S4 had Pirelli Cinturato HS 185VR15 tires.Q: What type of wheels did the 1968 ISO Fidia S4 have? A: The 1968 ISO Fidia S4 had Disc; 6Lx15 wheels.Q: How many Fidia were produced? A: ISO produced 192 examples of the Fidia from 1967 to 1975.Q: What engine did the 1968 ISO Fidia S4 have? A: The engine powering the 1968 ISO Fidia S4 was a V 8 (5359 cc | 327.0 cu in. | 5.4 L.) with 350.00 SAE @ 5800 RPM and 360 Ft-Lbs (488 NM) @ 3600 RPM. Q: What transmission did the 1968 ISO Fidia S4 have? A: The 1968 ISO Fidia S4 had a 4 speed Manual Borg Warner T-10 gearbox.
