These are standard specifications for the 1990 Nissan 240SX, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
5 Manual
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Body / Chassis : | Steel unibody |
| Production Years for Series : | 1989 - 1994 |
| Price : | $13,000-$13,200 |
| Weight : | 2650 lbs | 1202.02 kg |
Engine & Transmission
| Inline 4 | |
|---|---|
| Displacement : | 2393 cc | 146.0 cu in. | 2.4 L. |
| Power : | 140 BHP (103.04 KW) @ 5600 |
| Torque : | 152.00 @ 4400 |
| Bore : | 3.5 in | 89 mm. |
| Stroke : | 3.8 in | 96 mm. |
| Compression : | 8.6:1 |
| Valvetrain : | 12 OHC (3 valves per cylinder) |
| Cylinder Block : | Cast-iron |
| Electronic fuel injection | |
5 Manual
Production Figures
| Total Nissan Production for 1990 : | 405,147 |
| 1990 Nissan 240SX | |
Handling
Recall
| Component | SEAT BELTS:FRONT:BUCKLE ASSEMBLY |
|---|---|
| Manufacturer | NISSAN NORTH AMERICA, INC. |
| Mfr Report Date | 19860801 |
| NHTSA Campaign ID | 95V103002 |
| Summary | THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED 'PRESS.' IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY. |
| Consequence | THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH. |
| Remedy | OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED FREE OF CHARGE. |
| Notes | SYSTEM: INTERIOR; SEAT BELTS; BELT BUCKLES.VEHICLE DESCRIPTION: PASSENGER, MULTI-PURPOSE VEHICLES AND LIGHT DUTY TRUCKS EQUIPPED WITH SAFETY BELTS MADE BY TAKATA CORPORATION.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPONSERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME, PLEASE CONTACT NISSAN AT 1-800-647-7261.ALSO CONTACT THE NATIONALHIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
Data updated January 2023
1990 Averages
| Avg. Car Cost : | $16,000 |
| Avg. Household Income : | $28,970 |
| Avg. Home : | $123,000 |
| Avg. Gallon of Gas : | $1.12 |
| Total Car Production : | 9,782,997 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1990 Nissan 240SX?
Q: What is the wheelbase size of the 1990 Nissan 240SX? A: The 1990 Nissan 240SX has a wheelbase size of 97.40 inches.Q: What is the length of the 1990 Nissan 240SX? A: The 1990 Nissan 240SX has a length of 178.00 inches.Q: What is the width of the 1990 Nissan 240SX? A: The 1990 Nissan 240SX has a width of 66.50 inches.Q: How much did the 1990 Nissan 240SX cost when new?A: The 1990 Nissan 240SX cost approximately $13,000 to $13,200 (USD) when new.Q: What were the bodystyles of the 1990 Nissan 240SX? A: The 1990 Nissan 240SX was offered as a Coupe, Hatchback Coupe.Q: How many vehicles did Nissan produce in 1990? A: Nissan produced 405,147 automobiles in 1990.Q: What engine did the 1990 Nissan 240SX have? A: The engine powering the 1990 Nissan 240SX was a Inline 4 (2393 cc | 146.0 cu in. | 2.4 L.) with 140 BHP (103.04 KW) @ 5600 and 152.00 @ 4400. Q: What transmission did the 1990 Nissan 240SX have? A: The 1990 Nissan 240SX had a 5 speed Manual gearbox.