conceptcarz.com

1978 Rolls-Royce Corniche Specifications

These are standard specifications for the 1978 Rolls-Royce Corniche, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Production Years for Series : 1971 - 1985
Price : $102,900-$109,800
Weight : 5000 lbs | 2267.962 kg
V 8 90-degree | Vee-Type
Displacement : 6751 cc | 412.0 cu in. | 6.8 L.
Power : 220 BHP (161.92 KW)
Bore : 4.1 in | 104 mm.
Stroke : 3.9 in | 99 mm.
Compression : 7.3:1
Main Bearings : 5
Construction : Cast-Aluminum block and head
2 carburetors
Transmission:
3 Automatic GM 400

Coupe

Seating Capacity : 4
Doors : 2
Exterior
Length : 207.5 in | 5271 mm.
Width : 72.7 in | 1847 mm.
Height : 58.8 in | 1492 mm.
Wheelbase : 119.5 in | 3035 mm.
Front Track : 57.5 in | 1461 mm.
Rear Track : 57.5 in | 1461 mm.

Convertible

Price : $109,800
Weight : 5000 lbs | 2267.962 kg
Seating Capacity : 4
Doors : 2
Exterior
Length : 207.5 in | 5271 mm.
Width : 72.7 in | 1847 mm.
Height : 58.8 in | 1492 mm.
Wheelbase : 119.5 in | 3035 mm.
Front Track : 57.5 in | 1461 mm.
Rear Track : 57.5 in | 1461 mm.

Suspension
Front : Wishbones and coil springs

Rear : Independent, semi-trailing arms with coil springs and automatic leveling

Steering
Rack and Pinion

Tires / Wheels
Tires : HR70x15
Wheels : Steel disc

Component

VEHICLE SPEED CONTROL

Manufacturer

ROLLS-ROYCE MOTORS, INC.

NHTSA Campaign ID78V006000
SummaryTHE VEHICLE MAY REMAIN ON AUTOMATIC CRUISE CONTROL EVEN WHEN DRIVER ATTEMPTS TO BRAKE. THIS MALFUNCTION MAY OCCUR WITHOUT PRIOR WARNING.
RemedyAS A TEMPORARY SOLUTION, DEALER WILL REMOVE THE SLEEVE BALL CHAIN LINKING THE BELLOWS VACUUM ASSEMBLY TO THE ACCELERATOR THROTTLE LINKAGE.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: EQUIPMENT; CRUISE CONTROL.CONSEQUENCES OF DEFECT: LOSS OF VEHICLE CONTROL AND AN ACCIDENT MAY OCCUR.NOTE: OWNER IS ADVISED NOT TO USE THE CRUISE CONTROL UNTIL THE VEHICLE HAS BEENINSPECTED AND CORRECTED.

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Manufacturer

ROLLS-ROYCE MOTORS, INC.

Mfr Report Date19740801
NHTSA Campaign ID80V066000
SummaryHEAT GENERATED BY CATALYTIC CONVERTERS MAY CAUSE DETERIORATION OF HYDRAULIC BRAKE HOSES ON CERTAIN VEHICLES. BRAKE HOSE MAY FAIL, RESULTING IN LOSS OF HYDRAULIC FLUID FROM THE DUAL HYDRAULIC SYSTEM.
RemedyDEALER WILL REPLACE HYDRAULIC BRAKE HOSES AND INSTALL A HEAT SHIELD TO PROTECT THEM, WITHOUT CHARGE.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: SERVICE BRAKES; HYDRAULIC BRAKE HOSES.CONSEQUENCES OF DEFECT: LOSS OF HYDRAULIC FLUID WOULD CAUSE A DEGRADATION OFBRAKING EFFECTIVENESS WITH THE POTENTIAL FOR A VEHICLE ACCIDENT.NOTE: VEHICLE OPERATOR MAY BE WARNED OF IMPENDING BRAKE FAILURE BY ILLUMINATIONOF THE BRAKE WARNING LIGHTS.

Information provided by NHTSA
Data updated January 2023
1978 Averages
Avg. Household Income : $17,000
Avg. Home : $54,800
Avg. Gallon of Gas : $0.63

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1978 Rolls-Royce Corniche?
How many 1978 Rolls-Royce Corniche were produced?
How powerful was the 1978 Rolls-Royce Corniche? Was the 1978 Rolls-Royce Corniche popular? Was the 1978 Rolls-Royce Corniche expensive? What was the fuel economy of the 1978 Rolls-Royce Corniche?

Q: What is the wheelbase size of the 1978 Rolls-Royce Corniche? A: The 1978 Rolls-Royce Corniche has a wheelbase size of 119.50 inches.

Q: What is the length of the 1978 Rolls-Royce Corniche? A: The 1978 Rolls-Royce Corniche has a length of 207.50 inches.

Q: What is the width of the 1978 Rolls-Royce Corniche? A: The 1978 Rolls-Royce Corniche has a width of 72.70 inches.

Q: How much did the 1978 Rolls-Royce Corniche cost when new?A: The 1978 Rolls-Royce Corniche cost approximately $102,900 to $109,800 (USD) when new.

Q: What were the bodystyles of the 1978 Rolls-Royce Corniche? A: The 1978 Rolls-Royce Corniche was offered as a Convertible, Coupe.

Q: What tires did the 1978 Rolls-Royce Corniche have? A: The 1978 Rolls-Royce Corniche had HR70x15 tires.

Q: What type of wheels did the 1978 Rolls-Royce Corniche have? A: The 1978 Rolls-Royce Corniche had Steel disc wheels.

Q: What engine did the 1978 Rolls-Royce Corniche have? A: The engine powering the 1978 Rolls-Royce Corniche was a V 8Vee-Type (6751 cc | 412.0 cu in. | 6.8 L.) with 220 BHP (161.92 KW).

Q: What transmission did the 1978 Rolls-Royce Corniche have? A: The 1978 Rolls-Royce Corniche had a 3 speed Automatic GM 400 gearbox.