The Ferrari 375 was introduced at the Paris Salon in 1953. During its production run which lasted until May of 1954, less than 45 examples of the 375 America were produced. The car was constructed for Ferrari's clientele who had the means to afford one of these beautiful creations. Since they were produced in limited numbers, the production took far longer than volume models.
Cabriolet by Pininfarina
Chassis #: 0488AM
View info and historyGioacchino Colombo started out being the primary builder of Ferrari's engines in the late in 1940's and a major contributor to the success of Ferrari. Aurelio Lambredi became his assistant in 1947. Lampredi became convinced that a large engine that was naturally aspirated would have better fuel economy and provide more power. Colombo was of the belief that smaller engine compiled with a supercharger would produce better results. Ferrari tested Lambredi's idea and proved it to be successful. Lampredi was promoted to chief design engineer and Colombo returned to Alfa Romeo. The Lampredi engines were used in the ladder part of the 1950's.Power was provided by a 4.5-liter Lampredi designed V-12 engine with either three twin-choke Weber 40 DCZ or DCF downdraughts, resulting in 300 horsepower. On all four corners were drum brakes, Borrani wire wheels accented the exterior of the vehicle, and a leaf spring suspension was used in the front and the rear. With the four-speed manual gearbox, the car could achieve a top speed of 150 mph and could race from zero to sixty in less than seven seconds.Most Ferrari's were custom-built cars. They were not mass-produced. Ferrari provided the engine and chassis while Italian coachbuilders provided the body. This meant the specifications varied. Engines also varied in horsepower rating, torque, and displacement.
Cabriolet by Pininfarina
Chassis #: 0488AM
View info and historyIn regards to the 375, Pinin Farina was tasked with building the bodywork for many of the models. The Pinin Farina design shared a similarity with the 250 Europa's. The dimensions of several automobiles were similar but their interiors, wings, bumpers, and detailing were all unique. The 375 MM was given its name after the famous 1000 mile race, the Mille Miglia. This limited production series was constructed in 1953 and 1954. The car was outfitted with a 4522 cc powerplant, a small increase in performance over the 4494 cc road-going version. The four-speed manual gearbox was fully synchronized and mounted to the engine. The front suspension was independent by parallel unequal length A-arms with a transverse leaf spring. The rear was sold with semi-elliptic springs and parallel trailing arms. This combination made the 375 MM perfect for high-speed circuits and the open road. In total, only 26 375 MM's had bodywork provided by Pinin Farina in either spyder or Berlinetta configuration. One example received bodywork courteous of Ghia.
In 1954, a 375 Plus was entered in the grueling 24 Hours of LeMans. Powered by a 4.9-liter engine, it captured the overall victory. Production of the 375 continued until 1955. Produced in limited numbers, their exclusivity in modern times is guaranteed. These wonderfully designed unique creations powered by the coveted Lampredi engines are a true time-tested testament of the work inspired by Enzo Ferrari and fostered by Italian ingenuity.
by Daniel Vaughan | Sep 2012
Cabriolet by Pininfarina
Chassis #: 0488AM
View info and history
Cabriolet by Pininfarina
Chassis #: 0488AM
View info and history
In 1954, a 375 Plus was entered in the grueling 24 Hours of LeMans. Powered by a 4.9-liter engine, it captured the overall victory. Production of the 375 continued until 1955. Produced in limited numbers, their exclusivity in modern times is guaranteed. These wonderfully designed unique creations powered by the coveted Lampredi engines are a true time-tested testament of the work inspired by Enzo Ferrari and fostered by Italian ingenuity.
by Daniel Vaughan | Sep 2012
1955 Ferrari 375 Plus Vehicle Profiles
Recent Vehicle Additions
Performance and Specification Comparison
Related Automotive News
Gooding & Company Releases Entire Catalogue for Upcoming London Sale, Led by a 1953 Ferrari 166 MM/53 Spider Offered from Long-Term Ownership
The London Auction at Hampton Court Palace will present an unrestored Ferrari 166 MM53 Spider and Ferrari 250 Europa, as well as a desirable Fiat 8V Berlinetta and right-hand-drive Aston Martin DB5 Convertible.
Gooding %26 Company, the international...
1962 Ferrari 250 GT SWB California Spider to Lead Gooding & Company's Amelia Island Auctions Alongside Stable of the Finest Ferraris
The star car of the auctions will be a one-off 1962 Ferrari 250 GT SWB California Spider, joined by a 250 GT Tour de France Berlinetta, a 250 MM Vignale Spider, and other examples of Maranellos finest models.
Leading international auction...
Gooding & Company Presents Three Significant Competition Ferrari Berlinettas At The Company's 15Th Annual Pebble Beach Auctions
These three cars showcase Ferraris lineage of competition GT cars. Selections include the 1966 Ferrari 275 GTBC, the 1959 Ferrari 250 GT Tour de France, and the 1950 Ferrari 166 MM195 S Berlinetta Le Mans.
Santa Monica, Calif. (June 28,...
2015 Pebble Beach Concours d'Elegance Best of Show
PEBBLE BEACH, Calif. (August 17, 2015) -- An Italian Isotta Fraschini Tipo 8A Cabriolet that once turned heads and garnered top prizes in the classic era glided to victory at the 65th Pebble Beach Concours dElegance on Sunday.
The competition...
63rd Pebble Beach Concours d'Elegance Names 1934 Packard 'Best of Show'
The competition showcased 248 cars, including 48 from abroad
PEBBLE BEACH, Calif. (August 18, 2013) -- A 1934 Packard 1108 Twelve Dietrich Convertible Victoria owned by Joseph and Margie Cassini III of West Orange, New Jersey, was named Best...