1991 Oldsmobile Cutlass Recalls

1991 Oldsmobile Cutlass
1991 Oldsmobile Cutlass Navigation
  • Article
  • Image gallery
  • Valuation
  • Specifications
  • Recalls
    • Component

    FUEL SYSTEM, GASOLINE

    Manufacturer

    HONEYWELL INTERNATIONAL, INC.

    NHTSA Campaign ID06E043000
    SummaryCERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON 'DOCUMENT SEARCH' AND THEN 'BUS APPLICATIONS'). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
    ConsequenceTHIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.
    RemedyHONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).
    NotesTHIS RECALL ONLY PERTAINS TO AFTERMARKET FRAM FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE VEHICLES LISTED.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

    Component

    FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES

    Manufacturer

    DELPHI

    NHTSA Campaign ID07E021000
    SummaryCERTAIN DELPHI FUEL PRESSURE REGULATORS, P/NOS. FP10020-11B1, FP10026-11B1, AND FP10027-11B1, SOLD AFTER JANUARY 9, 2007, AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE UNIVERSAL PRESSURE REGULATORS (UPR) WERE PRODUCED WITHOUT AN O'RING AND RETAINER.
    ConsequenceFUEL MAY LEAK, POSSIBLY RESULTING IN A FIRE.
    RemedyDELPHI WILL NOTIFY OWNERS AND REPLACE THE UPR FREE OF CHARGE. THE RECALL BEGAN ON APRIL 23, 2007. OWNERS CAN CONTACT DELPHI AT 877-411-8770.
    NotesTHIS RECALL ONLY PERTAINS TO AFTERMARKET DELPHI FUEL PRESSURE REGULATORS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED BY GENERAL MOTORS.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

    Component

    STRUCTURE

    Manufacturer

    GENERAL MOTORS CORP.

    NHTSA Campaign ID00V189000
    SummaryVEHICLE DESCRIPTION: PASSENGER VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA, WHERE ROAD SALT USE IS HEAVY. A CONDITION WHERE ONE OR BOTH FRONT ENGINE CRADLE BOLTS CAN PULL THROUGH THE RETAINERS DUE TO CORROSION OF THE RETAINERS.
    ConsequenceIF BOTH BOLTS PULL THROUGH, THE FRONT OF THE CRADLE WOULD NO LONGER BE SUPPORTED AT THE MOUNTING LOCATIONS AND THE STEERING INTERMEDIATE SHAFT COULD SEPARATE FROM THE STEERING GEAR.
    RemedyDEALERS WILL REPLACE THE FRONT AND REAR FRAME/CRADLE BOLTS AND RETAINERS.
    NotesOWNER NOTIFICATION BEGAN SEPTEMBER 28, 2000. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020, BUICK AT 1-800-521-7300, PONTIAC AT 1-800-762-2737, OR OLDSMOBILE AT 1-800-442-6537. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).

    Component

    SEAT BELTS:FRONT:ANCHORAGE

    Manufacturer

    GENERAL MOTORS CORP.

    Mfr Report Date19880801
    NHTSA Campaign ID95V173000
    SummaryTHESE VEHICLES WERE ASSEMBLED WITH REAR OUTBOARD SAFETY BELT ANCHORAGES THAT MAY NOT WITHSTAND THE REQUIRED LOAD. THIS DOES NOT COMPLY WITH FMVSS NO.210, 'SEAT BELT ASSEMBLY ANCHORAGES.'
    ConsequenceCONSEQUENCE OF NON-COMPLIANCE: IN A COLLISON, STRESS CAN CAUSE THE ATTACHMENT METAL TO TEAR AND ALLOW THE ANCHORAGE TO SEPARATE FROM THE BODY OF THE VEHICLE. THE SAFETY BELT MAY NOT PROTECT AN OCCUPANT IN THE EVENT OF A VEHICLE CRASH.
    RemedyDEALERS WILL REPLACE THE EXISTING ANCHOR BOLTS WITH A NEW SHOULDER BOLT AND THREAD LOCKING ADHESIVE. ADDITIONALLY, NOISE CONTROL PATCHES WILL BE APPLIED AT EACH ANCHORAGE.
    NotesSYSTEM: INTERIOR; ACTIVE RESTRAINTS; BELT ANCHOR AND ATTACHMENT; FMVSS NO.210.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BUICK AT 1-800-521-7300; CHEVROLET AT 1-800-222-1020; PONTIAC AT 1-800-762-2737; OR OLDSMOBILE AT 1-800-442-6537. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

    Component

    SEATS:FRONT ASSEMBLY:RECLINER

    Manufacturer

    GENERAL MOTORS CORP.

    Mfr Report Date19890801
    NHTSA Campaign ID92V124000
    SummaryTHE POWER SEAT OR RECLINER WIRING HARNESS CAN BE PINCHED OR CAN CHAFE ON THE SEAT FRAME OR SPRING SUPPORT ROD, WEARING THROUGH THE WIRE INSULATION AND CAUSING AN ELECTRICAL SHORT.
    ConsequenceTHE HIGH CURRENT CAUSED BY THE ELECTRICAL SHORT WELDS THECIRCUIT BREAKER ELEMENTS TOGETHER IN THE CLOSED POSITION, LEAVING THE CIRCUITUNPROTECTED AND GENERATING SUFFICIENT HEAT TO BURN THE WIRE INSULATION ANDIGNITE THE SEAT CUSHION MATERIAL.
    RemedyREPAIR ANY ABRADED WIRING AND REROUTE THE WIRING HARNESS USING A WIRING HARNESS CLIP.
    NotesSYSTEM: INTERIOR: SEATING.VEHICLE DESCRIPTION: PASSENGER CARS WITH 6 WAY POWER SEATS OR POWER RECLINERS.

    Component

    SEAT BELTS

    Manufacturer

    GENERAL MOTORS CORP.

    Mfr Report Date19900201
    NHTSA Campaign ID92V003000
    SummaryTHE FRONT DOOR SHOULDER BELT GUIDE LOOPS MAY BE CRACKED AND ARE NOT IN COMPLIANCE WITH FMVSS 208.
    ConsequenceTHE SEAT OCCUPANT FACES INCREASED RISK OF INJURY IN THEEVENT OF A SUDDEN STOP OR ACCIDENT.
    RemedyINSTALL REINFORCING PLATES ON THE CRACKED SHOULDER BELT GUIDES.
    NotesSYSTEM: SAFETY BELTS; FMVSS 208.DESCRIPTION OF VEHICLES: PASSENGER VEHICLES; 1991 GM 'J' AND 'W' MODEL CARS.

    Component

    STRUCTURE

    Manufacturer

    GENERAL MOTORS CORP.

    Mfr Report Date19900801
    NHTSA Campaign ID97V058000
    SummaryVEHICLE DESCRIPTION: PASSENGER VEHICLES AND MINI VANS ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE FOLLOWING STATES: CONNECTICUT, ILLINOIS, INDIANA, MAINE, MASSACHUSETTS, MICHIGAN, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT AND WISCONSIN. THE REAR CRADLE BOLTS PULL THROUGH THE RETAINERS DUE TO CORROSION OF THE RETAINER. IF BOTH BOLTS PULL THROUGH, THE REAR CRADLE WOULD NOT LONGER BE SUPPORTED AT THESE MOUNTING LOCATIONS AND THE STEERING INTERMEDIATE SHAFT CAN SEPARATE FROM THE STEERING GEAR.
    ConsequenceIF THIS WERE TO OCCUR WHILE THE VEHICLE WAS IN MOTION, A VEHICLE CRASH COULD RESULT.
    RemedyDEALERS WILL REPLACE THE REAR CRADLE BOLTS AND RETAINERS.
    NotesOWNER NOTIFICATION IS EXPECTED TO BEGIN DURING MAY 1997.NOTE:OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BUICK AT 1-800-521-7300, CHEVROLET AT 1-800-222-1020, OLDSMOBILE AT 1-800-442-6537, OR PONTIAC AT 1-800-762-2737.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

    Component

    VISIBILITY:POWER WINDOW DEVICES AND CONTROLS

    Manufacturer

    GENERAL MOTORS CORP.

    Mfr Report Date19910101
    NHTSA Campaign ID92V043000
    SummaryMOISTURE CAN ENTER THE EXPRESS-DOWN ELECTRONIC CONTROL MODULE AND CAUSE A SHORT CIRCUIT THAT CAUSES WINDOW OPERATION WITHOUT OPERATOR CONTROL, AND LEAVES THE WINDOW IN THE DOWN POSITION.
    ConsequenceTHE ELECTRONIC CONTROL MODULE WILL FAIL FROM OVERHEATINGAND COULD RESULT IN A FIRE HAZARD INSIDE THE DOOR PANEL.
    RemedyREPLACE THE WINDOW EXPRESS-DOWN ELECTRONIC CONTROL MODULE.
    NotesSYSTEM: VISUAL SYSTEMS.VEHICLE DESCRIPTION: PASSENGER CARS EQUIPPED WITH POWER WINDOWS.

    Information provided by NHTSA
    Data updated June 2024

    Q: Does the 1991 Oldsmobile Cutlass have any vehicle recalls?
    A: Yes, the 1991 Oldsmobile Cutlass has atleast 8 recalls.

    Q: What are the 1991 Oldsmobile Cutlass recalls?
    A: The 1991 Oldsmobile Cutlass recalls include: FUEL SYSTEM, GASOLINE, FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES, STRUCTURE, SEAT BELTS:FRONT:ANCHORAGE, SEATS:FRONT ASSEMBLY:RECLINER, SEAT BELTS, STRUCTURE, VISIBILITY:POWER WINDOW DEVICES AND CONTROLS

    .

    Vehicle information, history, and specifications from concept to production.