These are standard specifications for the 1990 Mazda RX-7, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
5 Manual , 4 Automatic
Information provided by NHTSA
Data updated January 2023
Features
Engine Location : | Front |
Drive Type : | Rear Wheel |
Body / Chassis : | Steel unibody |
Production Years for Series : | 1986 - 1991 |
Price : | $18,000-$26,500 |
Weight : | 2630 lbs | 1192.948 kg |
Engine & Transmission
Rotary | Wankel with two coaxial three-lobe rotors | |
---|---|
Displacement : | 1308 cc | 79.8 cu in. | 1.3 L. |
Power : | 160 BHP (117.76 KW) @ 7000 RPM |
Torque : | 140 Ft-Lbs (190 NM) @ 4000 RPM |
Compression : | 9.7:1 |
Main Bearings : | 2 |
Multi-port Fuel Injection |
5 Manual , 4 Automatic
Production Figures
Total Mazda Production for 1990 : | 244,720 |
RX-7 Production (1986-1991) : | 272,027 |
Total 1990 RX-7 production : | 9,743 |
1990 Mazda RX-7 |
Handling
Recall
Component | SEAT BELTS:FRONT:WEBBING |
---|---|
Manufacturer | MAZDA (NORTH AMERICA),INC |
Mfr Report Date | 19881224 |
NHTSA Campaign ID | 96V173000 |
Summary | THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY WILL BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE. |
Consequence | IN THE EVENT OF A VEHICLE COLLISION, THE OCCUPANT WOULD NOT BE ADEQUATELY RESTRAINED INCREASING THE RISK OF PERSONAL INJURY. |
Remedy | DEALERS WILL REPLACE INOPERATIVE SHOULDER BELTS. MAZDA HAS EXTENDED THE WARRANTY COVERAGE ON THE DRIVER AND PASSENGER AUTOMATIC SHOULDER BELT RAIL AND MOTOR FOR THE LIFE OF THE VEHICLE. |
Notes | OWNER NOTIFICATION:OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING OCTOBER 1996. NOTE:OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'SAUTO SAFETY HOTLINE AT 1-800-424-9393. |
Component | AIR BAGS:FRONTAL |
---|---|
Manufacturer | MAZDA (NORTH AMERICA),INC |
Mfr Report Date | 19891101 |
NHTSA Campaign ID | 90E043002 |
Summary | THREADED INFLATOR COMPONENTS MAY HAVE BEEN DAMAGED DURING ASSEMBLY WHICH MAY ALLOW COMPONENTS TO SEPARATE WHEN INFLATOR RECEIVES A SIGNAL TO DEPLOY THE AIR BAG. |
Consequence | INFLATOR COMPONENT SEPARATION ALLOWS HOT COMBUSTION GASES TO ESCAPE INTO THE PASSENGER COMPARTMENT WHICH COULD RESULT IN INJURIES TO VEHICLE OCCUPANTS. |
Remedy | REPLACE AIR BAG MODULES CONTAINING POTENTIALLY DEFECTIVE INFLATORS. |
Notes | NOTE: THIS CAMPAIGN WAS INITIATED BY TRW, INC., MANUFACTURER OF THE AIR BAG MODULE SYSTEM:AIR BAG MODULES.VEHICLE DESCRIPTION:PASSENGER CARS EQUIPPED WITH DRIVER SIDE SUPPLEMENTAL AIRBAG MODULES. |
Data updated January 2023
1990 Averages
Avg. Car Cost : | $16,000 |
Avg. Household Income : | $28,970 |
Avg. Home : | $123,000 |
Avg. Gallon of Gas : | $1.12 |
Total Car Production : | 9,782,997 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1990 Mazda RX-7?
Q: What is the wheelbase size of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a wheelbase size of 95.70 inches.Q: What is the length of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a length of 169.90 inches.Q: What is the width of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a width of 66.50 inches.Q: How much did the 1990 Mazda RX-7 cost when new?A: The 1990 Mazda RX-7 cost approximately $18,000 to $26,500 (USD) when new.Q: What were the bodystyles of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 was offered as a Convertible, Coupe, Coupe 2+2.Q: How many vehicles did Mazda produce in 1990? A: Mazda produced 244,720 automobiles in 1990.Q: How many RX-7 were produced? A: Mazda produced 272,027 examples of the RX-7 from 1986 to 1991.Q: How many 1990 RX-7s were produced? A: Mazda produced 9,743 examples of the RX-7 in 1990.Q: What engine did the 1990 Mazda RX-7 have? A: The engine powering the 1990 Mazda RX-7 was a Rotary (1308 cc | 79.8 cu in. | 1.3 L.) with 160 BHP (117.76 KW) @ 7000 RPM and 140 Ft-Lbs (190 NM) @ 4000 RPM. Q: What transmissions did the 1990 Mazda RX-7 have? A: The 1990 Mazda RX-7 had the following gearbox options: 5 speed Manual, 4 speed Automatic.
What are the dimension and mechanical specifications of the 1990 Mazda RX-7?
How many 1990 Mazda RX-7 were produced?
How powerful was the 1990 Mazda RX-7? Was the 1990 Mazda RX-7 popular? Was the 1990 Mazda RX-7 expensive? What was the fuel economy of the 1990 Mazda RX-7?
Q: What is the wheelbase size of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a wheelbase size of 95.70 inches.Q: What is the length of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a length of 169.90 inches.Q: What is the width of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a width of 66.50 inches.Q: How much did the 1990 Mazda RX-7 cost when new?A: The 1990 Mazda RX-7 cost approximately $18,000 to $26,500 (USD) when new.Q: What were the bodystyles of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 was offered as a Convertible, Coupe, Coupe 2+2.Q: How many vehicles did Mazda produce in 1990? A: Mazda produced 244,720 automobiles in 1990.Q: How many RX-7 were produced? A: Mazda produced 272,027 examples of the RX-7 from 1986 to 1991.Q: How many 1990 RX-7s were produced? A: Mazda produced 9,743 examples of the RX-7 in 1990.Q: What engine did the 1990 Mazda RX-7 have? A: The engine powering the 1990 Mazda RX-7 was a Rotary (1308 cc | 79.8 cu in. | 1.3 L.) with 160 BHP (117.76 KW) @ 7000 RPM and 140 Ft-Lbs (190 NM) @ 4000 RPM. Q: What transmissions did the 1990 Mazda RX-7 have? A: The 1990 Mazda RX-7 had the following gearbox options: 5 speed Manual, 4 speed Automatic.Similarly Sized Vehicles
from 1990
Mazda Monthly Sales Volume
March 2024
37,119
February 2024
32,705
January 2024
30,279
December 2023
39,518
November 2023
27,715
October 2023
23,504
September 2023
28,031
August 2023
30,174
June 2023
29,786
May 2023
33,262
April 2023
32,351
March 2023
34,778