1990 Mazda RX-7 Navigation
Features
Engine Location : | Front |
Drive Type : | Rear Wheel |
Body / Chassis : | Steel unibody |
Production Years for Series : | 1986 - 1991 |
Price : | $18,000-$26,500 |
Weight : | 2630 lbs | 1192.948 kg |
Engine & Transmission
Rotary | Wankel with two coaxial three-lobe rotors | |
---|---|
Displacement : | 1308 cc | 79.8 cu in. | 1.3 L. |
Power : | 160 BHP (117.76 KW) @ 7000 RPM |
Torque : | 140 Ft-Lbs (190 NM) @ 4000 RPM |
Compression : | 9.7:1 |
Main Bearings : | 2 |
Multi-port Fuel Injection |
5 Manual , 4 Automatic
Production Figures
Total Mazda Production for 1990 : | 244,720 |
RX-7 Production (1986-1991) : | 272,027 |
Total 1990 RX-7 production : | 9,743 |
1990 Mazda RX-7 |
Handling
Recall
Component | SEAT BELTS:FRONT:WEBBING |
---|---|
Manufacturer | MAZDA (NORTH AMERICA),INC |
Mfr Report Date | 19881224 |
NHTSA Campaign ID | 96V173000 |
Summary | THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY WILL BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE. |
Consequence | IN THE EVENT OF A VEHICLE COLLISION, THE OCCUPANT WOULD NOT BE ADEQUATELY RESTRAINED INCREASING THE RISK OF PERSONAL INJURY. |
Remedy | DEALERS WILL REPLACE INOPERATIVE SHOULDER BELTS. MAZDA HAS EXTENDED THE WARRANTY COVERAGE ON THE DRIVER AND PASSENGER AUTOMATIC SHOULDER BELT RAIL AND MOTOR FOR THE LIFE OF THE VEHICLE. |
Notes | OWNER NOTIFICATION:OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING OCTOBER 1996. NOTE:OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'SAUTO SAFETY HOTLINE AT 1-800-424-9393. |
Component | AIR BAGS:FRONTAL |
---|---|
Manufacturer | MAZDA (NORTH AMERICA),INC |
Mfr Report Date | 19891101 |
NHTSA Campaign ID | 90E043002 |
Summary | THREADED INFLATOR COMPONENTS MAY HAVE BEEN DAMAGED DURING ASSEMBLY WHICH MAY ALLOW COMPONENTS TO SEPARATE WHEN INFLATOR RECEIVES A SIGNAL TO DEPLOY THE AIR BAG. |
Consequence | INFLATOR COMPONENT SEPARATION ALLOWS HOT COMBUSTION GASES TO ESCAPE INTO THE PASSENGER COMPARTMENT WHICH COULD RESULT IN INJURIES TO VEHICLE OCCUPANTS. |
Remedy | REPLACE AIR BAG MODULES CONTAINING POTENTIALLY DEFECTIVE INFLATORS. |
Notes | NOTE: THIS CAMPAIGN WAS INITIATED BY TRW, INC., MANUFACTURER OF THE AIR BAG MODULE SYSTEM:AIR BAG MODULES.VEHICLE DESCRIPTION:PASSENGER CARS EQUIPPED WITH DRIVER SIDE SUPPLEMENTAL AIRBAG MODULES. |
Data updated June 2024
1990 Averages
Avg. Car Cost : | $16,000 |
Avg. Household Income : | $28,970 |
Avg. Home : | $123,000 |
Avg. Gallon of Gas : | $1.12 |
Total Car Production : | 9,782,997 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1990 Mazda RX-7?
Q: What is the wheelbase size of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a wheelbase size of 95.70 inches.Q: What is the length of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a length of 169.90 inches.Q: What is the width of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a width of 66.50 inches.Q: How much did the 1990 Mazda RX-7 cost when new?A: The 1990 Mazda RX-7 cost approximately $18,000 to $26,500 (USD) when new.Q: What were the bodystyles of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 was offered as a Convertible, Coupe, Coupe 2+2.Q: How many vehicles did Mazda produce in 1990? A: Mazda produced 244,720 automobiles in 1990.Q: How many RX-7 were produced? A: Mazda produced 272,027 examples of the RX-7 from 1986 to 1991.Q: How many 1990 RX-7s were produced? A: Mazda produced 9,743 examples of the RX-7 in 1990.Q: What engine did the 1990 Mazda RX-7 have? A: The engine powering the 1990 Mazda RX-7 was a Rotary (1308 cc | 79.8 cu in. | 1.3 L.) with 160 BHP (117.76 KW) @ 7000 RPM and 140 Ft-Lbs (190 NM) @ 4000 RPM. Q: What transmissions did the 1990 Mazda RX-7 have? A: The 1990 Mazda RX-7 had the following gearbox options: 5 speed Manual, 4 speed Automatic.
What are the dimension and mechanical specifications of the 1990 Mazda RX-7?
How many 1990 Mazda RX-7 were produced?
How powerful was the 1990 Mazda RX-7? Was the 1990 Mazda RX-7 popular? Was the 1990 Mazda RX-7 expensive? What was the fuel economy of the 1990 Mazda RX-7?
Q: What is the wheelbase size of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a wheelbase size of 95.70 inches.Q: What is the length of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a length of 169.90 inches.Q: What is the width of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 has a width of 66.50 inches.Q: How much did the 1990 Mazda RX-7 cost when new?A: The 1990 Mazda RX-7 cost approximately $18,000 to $26,500 (USD) when new.Q: What were the bodystyles of the 1990 Mazda RX-7? A: The 1990 Mazda RX-7 was offered as a Convertible, Coupe, Coupe 2+2.Q: How many vehicles did Mazda produce in 1990? A: Mazda produced 244,720 automobiles in 1990.Q: How many RX-7 were produced? A: Mazda produced 272,027 examples of the RX-7 from 1986 to 1991.Q: How many 1990 RX-7s were produced? A: Mazda produced 9,743 examples of the RX-7 in 1990.Q: What engine did the 1990 Mazda RX-7 have? A: The engine powering the 1990 Mazda RX-7 was a Rotary (1308 cc | 79.8 cu in. | 1.3 L.) with 160 BHP (117.76 KW) @ 7000 RPM and 140 Ft-Lbs (190 NM) @ 4000 RPM. Q: What transmissions did the 1990 Mazda RX-7 have? A: The 1990 Mazda RX-7 had the following gearbox options: 5 speed Manual, 4 speed Automatic.- 1990 Mazda RX-7 Menu
- Article
- Image gallery
- Valuation
- Specifications
- Profiles
- Recalls
Mazda
Similarly Sized Vehicles
from 1990
- BMW 325
BMW E30 M3
BMW Z1
Chevrolet Cavalier
DeTomaso Pantera
Honda Civic
Lotus Esprit
Mazda Miata
Mazda RX-7 GTO
Mercedes-Benz 190E
Mazda Monthly Sales Volume
March 2025
43,097
December 2024
40,201
November 2024
33,422
October 2024
37,307
September 2024
29,841
August 2024
41,259
June 2024
35,696
April 2024
31,125
March 2024
37,119
February 2024
32,705
January 2024
30,279