These are standard specifications for the 1996 Dodge Avenger, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
5 Manual , 4 Automatic
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Front Wheel |
| Body / Chassis : | Steel unibody |
| Production Years for Series : | 1995 - 2000 |
| Price : | $14,035-$16,830 |
| Weight : | 2880 lbs | 1306.346 kg |
Engine & Transmission
| V 6 | |
|---|---|
| Displacement : | 2491 cc | 152.0 cu in. | 2.5 L. |
| Power : | 163 HP (119.968 KW) @ 5800 RPM |
| Torque : | 170 Ft-Lbs (230 NM) @ 4400 RPM |
| Bore : | 3.3 in | 84 mm. |
| Stroke : | 3.0 in | 76 mm. |
| Compression : | 9.4:1 |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Aluminum |
| Sequential Fuel Injection | |
5 Manual , 4 Automatic
Production Figures
| Total Dodge Production for 1996 : | 280,416 |
| Total 1996 Avenger production : | 38,812 |
| 1996 Dodge Avenger | |
Handling
Recall
| Component | FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
|---|---|
| Manufacturer | AIRTEX PRODUCTS |
| NHTSA Campaign ID | 07E055000 |
| Summary | CERTAIN AIRTEX FUEL PUMP MODULE ASSEMBLIES, P/N E7081H, SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR THE VEHICLES LISTED ABOVE. THE WALL OF THE FLARED FITTING OF THE FUEL PUMP IS NOT THICK ENOUGH TO PREVENT THE MATING THREADED FITTINGS FROM BOTTOMING OUT BEFORE AN ADEQUATE SEAL IS ACHIEVED. THIS CONDITION MAY RESULT IN LEAKAGE OF FUEL AT THE CONNECTION OF THE VEHICLE FUEL LINE AND THE FUEL PUMP MODULE ASSEMBLY. |
| Consequence | IN THE PRESENCE OF AN IGNITION SOURCE, A FUEL LEAK COULD RESULT IN A FIRE. |
| Remedy | AIRTEX WILL NOTIFY OWNERS AND REPLACE THE FUEL PUMPS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING JULY 2007. OWNERS CAN CONTACT AIRTEX AUTOMOTIVE AT 800-880-3056. |
| Notes | AIRTEX RECALL NO. FP072007-1.THIS RECALL ONLY PERTAINS TO AFTERMARKET REPLACEMENT EQUIPMENT AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY DAIMLERCHRYSLER OR MITSUBISHI.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT |
|---|---|
| Manufacturer | DAIMLERCHRYSLER CORPORATION |
| Mfr Report Date | 19940616 |
| NHTSA Campaign ID | 99V066003 |
| Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE. |
| Consequence | THIS CONDITION COULD CAUSE THE LOWER LATERAL ARM BALL JOINT TO SEPARATE, INCREASING THE RISK OF A VEHICLE CRASH. |
| Remedy | DEALERS WILL INSPECT THE RUBBER BOOTS, AND IF THE BOOT IS DAMAGED, THEY WILL REPLACE THE LOWER LATERAL ARM AND BALL JOINT ON THE AFFECTED VEHICLES. |
| Notes | OWNER NOTIFICATION BEGAN AUGUST 2, 1999. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHRYSLER AT 1-800-992-1997.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| Component | SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT |
|---|---|
| Manufacturer | DAIMLERCHRYSLER CORPORATION |
| Mfr Report Date | 19940701 |
| NHTSA Campaign ID | 00V421002 |
| Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE. ALSO, MMC HAS ADDED THE POTENTIAL OF LEAKING MOISTURE, WHICH CAN CAUSE THE BALL STUD TO CORRODE. |
| Consequence | THIS CONDITION COULD CAUSE THE LOWER LATERAL ARM BALL JOINT TO SEPARATE, INCREASING THE RISK OF A VEHICLE CRASH. THIS CAMPAIGN SUPERCEDES MMC'S PREVIOUS SAFETY RECALL CAMPAIGN, SEE 99V-066. |
| Remedy | DEALERS WILL INSPECT THE LOWER LATERAL ARM BALL JOINT FOR WEAR. BALL JOINTS THAT EXHIBIT WEAR BEYOND THE ESTABLISHED TOLERANCE WILL BE REPLACED WITH NEWLY DESIGNED LATERAL ARM BALL JOINTS. BALL JOINTS THAT ARE WITHIN THE ESTABLISHED TOLERANCE WILL BE CLEANED AND A SPECIAL SEALANT WILL BE APPLIED TO PREVENT INTRUSION OF MOISTURE. |
| Notes | OWNER NOTIFICATION BEGAN MAY 21, 2001.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Data updated January 2023
1996 Averages
| Avg. Car Cost : | $16,300 |
| Avg. Household Income : | $36,300 |
| Avg. Home : | $118,200 |
| Avg. Gallon of Gas : | $1.22 |
| Avg. Stamp : | $0 |
1996 Dodge Avenger FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1996 Dodge Avenger?
Q: What is the wheelbase size of the 1996 Dodge Avenger? A: The 1996 Dodge Avenger has a wheelbase size of 103.70 inches.Q: What is the length of the 1996 Dodge Avenger? A: The 1996 Dodge Avenger has a length of 187.20 inches.Q: What is the width of the 1996 Dodge Avenger? A: The 1996 Dodge Avenger has a width of 68.50 inches.Q: How much did the 1996 Dodge Avenger cost when new?A: The 1996 Dodge Avenger cost approximately $14,035 to $16,830 (USD) when new.Q: What were the bodystyles of the 1996 Dodge Avenger? A: The 1996 Dodge Avenger was offered as a Coupe, ES Coupe.Q: How many vehicles did Dodge produce in 1996? A: Dodge produced 280,416 automobiles in 1996.Q: How many 1996 Avengers were produced? A: Dodge produced 38,812 examples of the Avenger in 1996.Q: What engine did the 1996 Dodge Avenger have? A: The engine powering the 1996 Dodge Avenger was a V 6 (2491 cc | 152.0 cu in. | 2.5 L.) with 163 HP (119.968 KW) @ 5800 RPM and 170 Ft-Lbs (230 NM) @ 4400 RPM. Q: What transmissions did the 1996 Dodge Avenger have? A: The 1996 Dodge Avenger had the following gearbox options: 5 speed Manual, 4 speed Automatic.
What are the dimension and mechanical specifications of the 1996 Dodge Avenger?
How many 1996 Dodge Avenger were produced?
How powerful was the 1996 Dodge Avenger? Was the 1996 Dodge Avenger popular? Was the 1996 Dodge Avenger expensive? What was the fuel economy of the 1996 Dodge Avenger?
Q: What is the wheelbase size of the 1996 Dodge Avenger? A: The 1996 Dodge Avenger has a wheelbase size of 103.70 inches.Q: What is the length of the 1996 Dodge Avenger? A: The 1996 Dodge Avenger has a length of 187.20 inches.Q: What is the width of the 1996 Dodge Avenger? A: The 1996 Dodge Avenger has a width of 68.50 inches.Q: How much did the 1996 Dodge Avenger cost when new?A: The 1996 Dodge Avenger cost approximately $14,035 to $16,830 (USD) when new.Q: What were the bodystyles of the 1996 Dodge Avenger? A: The 1996 Dodge Avenger was offered as a Coupe, ES Coupe.Q: How many vehicles did Dodge produce in 1996? A: Dodge produced 280,416 automobiles in 1996.Q: How many 1996 Avengers were produced? A: Dodge produced 38,812 examples of the Avenger in 1996.Q: What engine did the 1996 Dodge Avenger have? A: The engine powering the 1996 Dodge Avenger was a V 6 (2491 cc | 152.0 cu in. | 2.5 L.) with 163 HP (119.968 KW) @ 5800 RPM and 170 Ft-Lbs (230 NM) @ 4400 RPM. Q: What transmissions did the 1996 Dodge Avenger have? A: The 1996 Dodge Avenger had the following gearbox options: 5 speed Manual, 4 speed Automatic.Similarly Sized Vehicles
from 1996
Dodge Monthly Sales Volume
March 2023
50,975