1995 Dodge Avenger Specifications

Specifications

1995 1996 1998 2000

Features

Engine Location :	Front
Drive Type :	Front Wheel
Body / Chassis :	Unibody
Production Years for Series :	1995 - 2000
Price :	$13,340-$17,190
Weight :	2820 lbs \| 1279.13 kg

Engine & Transmission

Inline 4
Displacement :	1983 cc \| 121.0 cu in. \| 2.0 L.
Power :	140 HP (103.04 KW) @ 6000 RPM
Torque :	130 Ft-Lbs (176 NM) @ 4800 RPM
Bore :	3.4 in \| 87 mm.
Stroke :	3.3 in \| 83 mm.
Compression :	9.6:1
Cylinder Block :	Cast-iron
Cylinder Head :	Aluminum
Sequential Fuel Injection

V 6
Displacement :	2491 cc \| 152.0 cu in. \| 2.5 L.
Power :	155 HP (114.08 KW) @ 5500 RPM
Torque :	161 Ft-Lbs (218 NM) @ 4400 RPM
Bore :	3.3 in \| 84 mm.
Stroke :	3.0 in \| 76 mm.
Compression :	9.4:1
Cylinder Block :	Cast-iron
Cylinder Head :	Aluminum
Sequential Fuel Injection

Transmission:
4 Automatic , 4 Automatic

Production Figures

Total Dodge Production for 1995 :	331,253
Total 1995 Avenger production :	32,870
1995 Dodge Avenger

Handling

Recall

Component	FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Manufacturer	AIRTEX PRODUCTS
NHTSA Campaign ID	07E055000
Summary	CERTAIN AIRTEX FUEL PUMP MODULE ASSEMBLIES, P/N E7081H, SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR THE VEHICLES LISTED ABOVE. THE WALL OF THE FLARED FITTING OF THE FUEL PUMP IS NOT THICK ENOUGH TO PREVENT THE MATING THREADED FITTINGS FROM BOTTOMING OUT BEFORE AN ADEQUATE SEAL IS ACHIEVED. THIS CONDITION MAY RESULT IN LEAKAGE OF FUEL AT THE CONNECTION OF THE VEHICLE FUEL LINE AND THE FUEL PUMP MODULE ASSEMBLY.
Consequence	IN THE PRESENCE OF AN IGNITION SOURCE, A FUEL LEAK COULD RESULT IN A FIRE.
Remedy	AIRTEX WILL NOTIFY OWNERS AND REPLACE THE FUEL PUMPS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING JULY 2007. OWNERS CAN CONTACT AIRTEX AUTOMOTIVE AT 800-880-3056.
Notes	AIRTEX RECALL NO. FP072007-1.THIS RECALL ONLY PERTAINS TO AFTERMARKET REPLACEMENT EQUIPMENT AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY DAIMLERCHRYSLER OR MITSUBISHI.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component	SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
Manufacturer	DAIMLERCHRYSLER CORPORATION
Mfr Report Date	19940616
NHTSA Campaign ID	99V066003
Summary	VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE.
Consequence	THIS CONDITION COULD CAUSE THE LOWER LATERAL ARM BALL JOINT TO SEPARATE, INCREASING THE RISK OF A VEHICLE CRASH.
Remedy	DEALERS WILL INSPECT THE RUBBER BOOTS, AND IF THE BOOT IS DAMAGED, THEY WILL REPLACE THE LOWER LATERAL ARM AND BALL JOINT ON THE AFFECTED VEHICLES.
Notes	OWNER NOTIFICATION BEGAN AUGUST 2, 1999. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHRYSLER AT 1-800-992-1997.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).

Component	SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
Manufacturer	DAIMLERCHRYSLER CORPORATION
Mfr Report Date	19940701
NHTSA Campaign ID	00V421002
Summary	VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE. ALSO, MMC HAS ADDED THE POTENTIAL OF LEAKING MOISTURE, WHICH CAN CAUSE THE BALL STUD TO CORRODE.
Consequence	THIS CONDITION COULD CAUSE THE LOWER LATERAL ARM BALL JOINT TO SEPARATE, INCREASING THE RISK OF A VEHICLE CRASH. THIS CAMPAIGN SUPERCEDES MMC'S PREVIOUS SAFETY RECALL CAMPAIGN, SEE 99V-066.
Remedy	DEALERS WILL INSPECT THE LOWER LATERAL ARM BALL JOINT FOR WEAR. BALL JOINTS THAT EXHIBIT WEAR BEYOND THE ESTABLISHED TOLERANCE WILL BE REPLACED WITH NEWLY DESIGNED LATERAL ARM BALL JOINTS. BALL JOINTS THAT ARE WITHIN THE ESTABLISHED TOLERANCE WILL BE CLEANED AND A SPECIAL SEALANT WILL BE APPLIED TO PREVENT INTRUSION OF MOISTURE.
Notes	OWNER NOTIFICATION BEGAN MAY 21, 2001.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).

Information provided by NHTSA
Data updated June 2024

1995 Averages

Avg. Car Cost :	$15,500
Avg. Household Income :	$35,900
Avg. Home :	$113,150
Avg. Gallon of Gas :	$1.10
Avg. Stamp :	$0
Total Car Production :	11,985,457

1995 Dodge Avenger FAQs (show)

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1995 Dodge Avenger?
How many 1995 Dodge Avenger were produced?
How powerful was the 1995 Dodge Avenger? Was the 1995 Dodge Avenger popular? Was the 1995 Dodge Avenger expensive? What was the fuel economy of the 1995 Dodge Avenger?

Q: What is the wheelbase size of the 1995 Dodge Avenger? A: The 1995 Dodge Avenger has a wheelbase size of 103.70 inches.

Q: What is the length of the 1995 Dodge Avenger? A: The 1995 Dodge Avenger has a length of 187.20 inches.

Q: What is the width of the 1995 Dodge Avenger? A: The 1995 Dodge Avenger has a width of 68.50 inches.

Q: How much did the 1995 Dodge Avenger cost when new?A: The 1995 Dodge Avenger cost approximately $13,340 to $17,190 (USD) when new.

Q: What were the bodystyles of the 1995 Dodge Avenger? A: The 1995 Dodge Avenger was offered as a Coupe, ES Coupe.

Q: How many vehicles did Dodge produce in 1995? A: Dodge produced 331,253 automobiles in 1995.

Q: How many 1995 Avengers were produced? A: Dodge produced 32,870 examples of the Avenger in 1995.

Q: What engines did the 1995 Dodge Avenger have? A: The 1995 Dodge Avenger had the following engine options: Inline 4 (1983 cc | 121.0 cu in. | 2.0 L.) with 140 HP (103.04 KW) @ 6000 RPM and 130 Ft-Lbs (176 NM) @ 4800 RPM

V 6 (2491 cc | 152.0 cu in. | 2.5 L.) with 155 HP (114.08 KW) @ 5500 RPM and 161 Ft-Lbs (218 NM) @ 4400 RPM

Q: What transmissions did the 1995 Dodge Avenger have? A: The 1995 Dodge Avenger had the following gearbox options: 4 speed Automatic, 4 speed Automatic.