1995 Plymouth Neon Specifications

Article

Image gallery

Specifications

Features

Engine Location :	Front
Drive Type :	Front Wheel
Body / Chassis :	Unibody
Production Years for Series :	1994 - 1999
Price :	$9,505-$13,570
Weight :	2315 lbs \| 1050.066 kg

Engine & Transmission

Inline 4
Displacement :	2000 cc \| 122.0 cu in. \| 2.0 L.
Power :	132 BHP (97.152 KW) @ 6000 RPM
Torque :	129 Ft-Lbs (175 NM) @ 5000 RPM

Inline 4
Displacement :	1983 cc \| 121.0 cu in. \| 2.0 L.
Power :	150 HP (110.4 KW) @ 6500 RPM
Torque :	133 Ft-Lbs (180 NM) @ 5500 RPM
Bore :	3.4 in \| 87 mm.
Stroke :	3.3 in \| 83 mm.
Compression :	9.8:1
Cylinder Block :	Cast-iron
Cylinder Head :	Aluminum
Sequential Fuel Injection

Transmission:
5 Manual , 3 Automatic , 4 Automatic

Production Figures

Total Plymouth Production for 1995 :	124,571
1995 Plymouth Neon
Highline Coupe 2 dr. 5 P :	24,704
Sedan 4 dr. 5 P :	89,607

Handling

Recall

Component	SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Manufacturer	CHRYSLER CORPORATION
Mfr Report Date	19931101
NHTSA Campaign ID	94V034000
Summary	THE REAR BRAKE HOSE MOUNTING BRACKET SCREWS CAN FAIL ALLOWING THE BRAKE HOSES TO MOVE OUT OF POSITION. THE UNRESTRAINED HOSES ARE THEN SUSCEPTIBLE TO DAMAGE WHICH COULD RESULT IN BRAKE FLUID LEAKAGE.
Consequence	BRAKE FLUID LEAKAGE WILL REDUCE THE BRAKING PERFORMANCEOF THE VEHICLE, EXTEND STOPPING DISTANCES, AND COULD RESULT IN AN ACCIDENT.
Remedy	THE REAR BRAKE LINE HOSE BRACKET SCREWS ON THESE VEHICLES WILL BE REPLACED.
Notes	SYSTEM: BRAKES; HYDRAULIC; LINES; FITTINGS.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME AND FREE OF CHARGE OR THE REMEDY DOES NOT CORRECT THE DEFECT OF NONCOMPLIANCE, PLEASE CONTACT CHRYSLER SERVICE CENTER AT 1-800-992-1997. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

Component	POWER TRAIN
Manufacturer	CHRYSLER CORPORATION
Mfr Report Date	19931101
NHTSA Campaign ID	94V033000
Summary	MOISTURE CAN GET INTO THE POWERTRAIN CONTROL MODULE (PCM) CAUSING DRIVEABILITY MALFUNCTIONS, INCLUDING STALLING.
Consequence	SHOULD DRIVE ABILITY MALFUNCTIONS OR STALLING OCCUR WHILETHE VEHICLE IS IN MOTION, A TRAFFIC ACCIDENT MAY OCCUR.
Remedy	THE POWERTRAIN CONTROL MODULES ON THESE VEHICLES WILL BE REPLACED.
Notes	SYSTEM: TRANSMISSION.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME AND FREE OF CHARGE OR THE REMEDY DOES NOT CORRECT THE DEFECT OR NONCOMPLIANCE, PLEASECONTACT CHRYSLET SERVICE CENTER AT 1-800-992-1997. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

Component	SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP
Manufacturer	CHRYSLER CORPORATION
Mfr Report Date	19931101
NHTSA Campaign ID	94V026000
Summary	THE ABS BRAKE MASTER CYLINDER REAR SEAL ALLOWS AIR TO ENTER THE BRAKE SYSTEM, CAUSING SPONGY BRAKES OR PARTIAL BRAKE SYSTEM LOSS.
Consequence	AIR ENTERING THE BRAKE SYSTEM CAUSED EXTENDED STOPPING DISTANCE OR PARTIAL LOSS OF BRAKES WHICH MAY RESULT IN AN ACCIDENT.
Remedy	MASTER CYLINDERS WILL BE INSPECTED FOR THE SUSPECT BUILD DATE CODE RANGE AND WILL BE REPLACED IF NECESSARY.
Notes	SYSTEM: BRAKES; HYDRAULIC; ANTI-SKID SYSTEM.VEHICLE DESCRIPTION: PASSENGER CARS.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME AND FREE OF CHARGE OR THE REMEDY DOES NOT CORRECT THE DEFECT OR NONCOMPLIANCE, PLEASE CONTACT CHRYSLER SERVICE CENTER AT 1-800-992-1997. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

Component	STEERING: STEERING WHEEL/HANDLE BAR
Manufacturer	CHRYSLER CORPORATION
Mfr Report Date	19940101
NHTSA Campaign ID	97V169000
Summary	VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE STEERING COLUMN COUPLER CAN BECOME DISCONNECTED WHEN THE VEHICLE EXPERIENCES AN UNDERBODY IMPACT.
Consequence	LOSS OF STEERING CONTROL CAN OCCUR.
Remedy	DEALERS WILL REPLACE THE STEERING COLUMN COUPLER WITH A COUPLER DESIGN THAT COLLAPSES ON IMPACT.
Notes	OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING NOVEMBER 1997.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHRYSLER AT 1-800-992-1997.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

Component	FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Manufacturer	CHRYSLER CORPORATION
Mfr Report Date	19940101
NHTSA Campaign ID	96V228000
Summary	THE FUEL AND REAR BRAKE TUBES CAN EXPERIENCE ACCELERATED CORROSION BETWEEN THE TUBES AND A RUBBER ISOLATOR.
Consequence	CORROSION OF THE TUBES CAN LEAD TO BRAKE FLUID OR FUEL LEAKAGE. THIS CAN CAUSE A LOSS OF BRAKES OR RESULT IN A FIRE.
Remedy	DEALERS WILL INSPECT THE BRAKE, FUEL SUPPLY AND FUEL VAPOR TUBES FOR THE PRESENCE OF CORROSION. ANY TUBES SHOWING CORROSION WILL BE REPLACED. ALL VEHICLES WILL HAVE THE RUBBER ISOLATOR REPLACED WITH A PLASTIC CLIP.
Notes	OWNER NOTIFICATION BEGAN DECEMBER 6, 1996.NOTE:OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHRYSLER AT 1-800-853-1403.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

Component	SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Manufacturer	CHRYSLER CORPORATION
Mfr Report Date	19940801
NHTSA Campaign ID	96V075000
Summary	THE BRAKE MASTER CYLINDER CAN LEAK BRAKE FLUID DUE TO A DAMAGED DOUBLE LIP REAR PISTON SEAL.
Consequence	BRAKE FLUID LEAKAGE CAN RESULT IN DIMINISHED EFFECTIVENESS OF ONE HALF OF THE SPLIT BRAKE SYSTEM. THE INSTRUMENT PANEL WARNING LIGHT(S) WILL SIGNAL SYSTEM IMPAIRMENT PRIOR TO PARTIAL BRAKE SYSTEM LOSS.
Remedy	DEALERS WILL REPLACE THE REAR BRAKE MASTER CYLINDR PISTON ASSEMBLY.
Notes	SYSTEM: BRAKES; HYDRAULIC; MASTER BRAKE CYLINDER. VEHICLE DESCRIPTION: PASSENGER VEHICLES. INCLUDES NEON VEHICLES EQUIPPED WITH THE 'ACR COMPETITION' PACKAGE ONLY. NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME, SHOULD CONTACT CHRYSLER AT 1-800-853-1403. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

Information provided by NHTSA
Data updated June 2024

1995 Averages

Avg. Car Cost :	$15,500
Avg. Household Income :	$35,900
Avg. Home :	$113,150
Avg. Gallon of Gas :	$1.10
Avg. Stamp :	$0
Total Car Production :	11,985,457

1995 Plymouth Neon FAQs (show)

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1995 Plymouth Neon?
How many 1995 Plymouth Neon were produced?
How powerful was the 1995 Plymouth Neon? Was the 1995 Plymouth Neon popular? Was the 1995 Plymouth Neon expensive? What was the fuel economy of the 1995 Plymouth Neon?

Q: What is the wheelbase size of the 1995 Plymouth Neon? A: The 1995 Plymouth Neon has a wheelbase size of 104.00 inches.

Q: What is the length of the 1995 Plymouth Neon? A: The 1995 Plymouth Neon has a length of 171.80 inches.

Q: What is the width of the 1995 Plymouth Neon? A: The 1995 Plymouth Neon has width of 67.20 and 67.50 inches.

Q: How much did the 1995 Plymouth Neon cost when new?A: The 1995 Plymouth Neon cost approximately $9,505 to $13,570 (USD) when new.

Q: What were the bodystyles of the 1995 Plymouth Neon? A: The 1995 Plymouth Neon was offered as a Highline Coupe, Highline Sedan, Sedan, Sport Coupe, Sport Sedan.

Q: How many vehicles did Plymouth produce in 1995? A: Plymouth produced 124,571 automobiles in 1995.

Q: What engines did the 1995 Plymouth Neon have? A: The 1995 Plymouth Neon had the following engine options: Inline 4 (2000 cc | 122.0 cu in. | 2.0 L.) with 132 BHP (97.152 KW) @ 6000 RPM and 129 Ft-Lbs (175 NM) @ 5000 RPM

Inline 4 (1983 cc | 121.0 cu in. | 2.0 L.) with 150 HP (110.4 KW) @ 6500 RPM and 133 Ft-Lbs (180 NM) @ 5500 RPM

Q: What transmissions did the 1995 Plymouth Neon have? A: The 1995 Plymouth Neon had the following gearbox options: 5 speed Manual, 3 speed Automatic, 4 speed Automatic.