These are standard specifications for the 1975 Chevrolet Camaro, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
3 Manual , 4 Manual , Automatic
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Production Years for Series : | 1970 - 1981 |
| Price : | $3,540-$4,050 |
| Weight : | 3420 lbs | 1551.286 kg |
Engine & Transmission
| Inline 6 | L-Head | |
|---|---|
| Displacement : | 4097 cc | 250.0 cu in. | 4.1 L. |
| Power : | 105 HP (77.28 KW) @ 1800 RPM |
| Bore : | 3.9 in | 99 mm. |
| Stroke : | 3.5 in | 90 mm. |
| Compression : | 8.2:1 |
| Main Bearings : | 7 |
| Cylinder Block : | Cast-iron |
| 1 barrel carburetor | |
| V 8 | |
|---|---|
| Displacement : | 5735 cc | 350.0 cu in. | 5.7 L. |
| Power : | 145 HP (106.72 KW) @ 3800 RPM |
| Torque : | 250 Ft-Lbs (339 NM) @ 2200 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.5 in | 88 mm. |
| Main Bearings : | 5 |
| Construction : | Cast-iron block and head |
| 2-barrel carburetor | |
| V 8 | |
|---|---|
| Displacement : | 5735 cc | 350.0 cu in. | 5.7 L. |
| Power : | 155 HP (114.08 KW) @ 3800 RPM |
| Torque : | 250 Ft-Lbs (339 NM) @ 2400 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.5 in | 88 mm. |
| Compression : | 8.5:1 |
| Main Bearings : | 5 |
| Valvetrain : | 16 OHV (2 valves per cylinder) |
| Construction : | Cast-iron block and head |
| 1 4-barrel carburetor | |
3 Manual , 4 Manual , Automatic
Production Figures
| Total Chevrolet Production for 1975 : | 1,755,773 |
| Total 1975 Camaro production : | 141,629 |
| 1975 Chevrolet Camaro | |
Handling
Recall
| Component | ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| NHTSA Campaign ID | 75V087000 |
| Notes | CHEVROLET CAMPAIGN NO 75-C-11.EQUIPPED WITH 350 CID V8 ENGINE ANDAIR-CONDITIONING.POSSIBILITY OF FAILURE OF THE FLEXBLE FAN BLADE.THEFAILURE IS THE RESULT OF FAN BLADE RESONANCE WHICH OCCURS AT 42 CYCLES PERSECOND OR AT APPROXIMATELY 630 ENGINE RPM.FAILURE OF THE FAN BLADE COULDRESULT IN A HAZARD TO TUNE-UP PERSONNEL SHOULD FAILURE OCCUR WITH THE ENGINERUNNING AND THE HOOD OPEN.(CORRECT BY INSPECTING AND REPLACING FAN BLADE). |
| Component | EQUIPMENT |
|---|---|
| Manufacturer | HONEYWELL INTERNATIONAL, INC. |
| NHTSA Campaign ID | 07E088000 |
| Summary | CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES. |
| Consequence | THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE. |
| Remedy | HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075. |
| Notes | CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | STEERING: STEERING WHEEL/HANDLE BAR |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| NHTSA Campaign ID | 75V094000 |
| Notes | CHEVROLET CAMPAIGN NO 75-C-13.BUICK CAMPAIGN NO 75-C-9.POSSIBILITY THATUNITS MAY HAVE BEEN ASSEMBLED WITH INSUFFICIENT TORQUE ON THE STEERING POTJOINT CLAMP BOLT/NUT WHICH SECURES THE INTERMEDIATE STEERING SHAFT TO THE UPPERSTEERING SHAFT.IF THIS CONDITION EXISTS, IT MAY ALLOW THE SHAFTS TO SEPARATEAND RESULT IN LOSS OF STEERING CONTROL.(CORRECT BY INSPECTING AND PROPERLYTORQUING THE STEERING CONNECTIONS WHREE NECESSARY.) |
Data updated January 2023
1975 Averages
| Avg. Car Cost : | $4,250 |
| Avg. Household Income : | $14,100 |
| Avg. Home : | $39,300 |
| Avg. Gallon of Gas : | $0.44 |
1975 Chevrolet Camaro FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1975 Chevrolet Camaro?
Q: What is the wheelbase size of the 1975 Chevrolet Camaro? A: The 1975 Chevrolet Camaro has a wheelbase size of 106.00 inches.Q: What is the length of the 1975 Chevrolet Camaro? A: The 1975 Chevrolet Camaro has a length of 196.00 inches.Q: What is the width of the 1975 Chevrolet Camaro? A: The 1975 Chevrolet Camaro has a width of 75.00 inches.Q: How much did the 1975 Chevrolet Camaro cost when new?A: The 1975 Chevrolet Camaro cost approximately $3,540 to $4,050 (USD) when new.Q: What is the bodystyle of the 1975 Chevrolet Camaro? A: The 1975 Chevrolet Camaro was a Hardtop Coupe.Q: How many vehicles did Chevrolet produce in 1975? A: Chevrolet produced 1,755,773 automobiles in 1975.Q: How many 1975 Camaros were produced? A: Chevrolet produced 141,629 examples of the Camaro in 1975.Q: What engines did the 1975 Chevrolet Camaro have? A: The 1975 Chevrolet Camaro had the following engine options: Inline 6L-Head (4097 cc | 250.0 cu in. | 4.1 L.) with 105 HP (77.28 KW) @ 1800 RPM V 8 (5735 cc | 350.0 cu in. | 5.7 L.) with 145 HP (106.72 KW) @ 3800 RPM and 250 Ft-Lbs (339 NM) @ 2200 RPM V 8 (5735 cc | 350.0 cu in. | 5.7 L.) with 155 HP (114.08 KW) @ 3800 RPM and 250 Ft-Lbs (339 NM) @ 2400 RPM Q: What transmissions did the 1975 Chevrolet Camaro have? A: The 1975 Chevrolet Camaro had the following gearbox options: 3 speed Manual, 4 speed Manual, Automatic.
What are the dimension and mechanical specifications of the 1975 Chevrolet Camaro?
How many 1975 Chevrolet Camaro were produced?
How powerful was the 1975 Chevrolet Camaro? Was the 1975 Chevrolet Camaro popular? Was the 1975 Chevrolet Camaro expensive? What was the fuel economy of the 1975 Chevrolet Camaro?
Q: What is the wheelbase size of the 1975 Chevrolet Camaro? A: The 1975 Chevrolet Camaro has a wheelbase size of 106.00 inches.Q: What is the length of the 1975 Chevrolet Camaro? A: The 1975 Chevrolet Camaro has a length of 196.00 inches.Q: What is the width of the 1975 Chevrolet Camaro? A: The 1975 Chevrolet Camaro has a width of 75.00 inches.Q: How much did the 1975 Chevrolet Camaro cost when new?A: The 1975 Chevrolet Camaro cost approximately $3,540 to $4,050 (USD) when new.Q: What is the bodystyle of the 1975 Chevrolet Camaro? A: The 1975 Chevrolet Camaro was a Hardtop Coupe.Q: How many vehicles did Chevrolet produce in 1975? A: Chevrolet produced 1,755,773 automobiles in 1975.Q: How many 1975 Camaros were produced? A: Chevrolet produced 141,629 examples of the Camaro in 1975.Q: What engines did the 1975 Chevrolet Camaro have? A: The 1975 Chevrolet Camaro had the following engine options: Inline 6L-Head (4097 cc | 250.0 cu in. | 4.1 L.) with 105 HP (77.28 KW) @ 1800 RPMSimilarly Sized Vehicles
from 1975
Chevrolet Monthly Sales Volume
March 2023
398,141