1984 Ford Bronco Specifications

Specifications

Features

Engine Location :	Front
Drive Type :	Rear Wheel (standard), 4WD
Lockable 4WD
Production Years for Series :	1980 - 1986
Price :	$9,999-$10,860
Weight :	3240 lbs \| 1469.639 kg

Engine & Transmission

V 6 \| 2-barrel carburetor
Displacement :	2802 cc \| 171.0 cu in. \| 2.8 L.
Power :	115 BHP (84.64 KW) @ 4600 RPM
Bore :	3.7 in \| 93 mm.
Stroke :	2.7 in \| 69 mm.
Compression :	8.6:1

V 8
Displacement :	5752 cc \| 351.0 cu in. \| 5.8 L.
Power :	150 BHP (110.4 KW)

Transmission:
3 Automatic , 5 Manual

Production Figures

Total Ford Production for 1984 :	1,180,708
1984 Ford Bronco

Dimension(s)

Wagon

Chassis # 1FMEU15HXELA42319
View info And history
Auction entries : 1

Chassis # 1FMCU14S4EUC69455
View info And history
Auction entries : 1

Exterior
Seating Capacity :	4
Doors :	2
Length :	158.4 in \| 4023 mm.
Width :	68.0 in \| 1727 mm.
Height :	68.2 in \| 1732 mm.
Wheelbase :	94.0 in \| 2388 mm.

Wagon

Exterior
Price :	$10,860
Weight :	4080 lbs \| 1850.657 kg
Seating Capacity :	4
Doors :	2
Length :	177.6 in \| 4511 mm.
Width :	77.2 in \| 1961 mm.
Height :	73.2 in \| 1859 mm.
Wheelbase :	104.7 in \| 2659 mm.

Handling

Suspension
Front : Twin Traction Beam independent

Tires / Wheels
Tires :	P215/75R x 15SL

Recall

Component	FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Manufacturer	FEDERAL-MOGUL CORPORATION
NHTSA Campaign ID	07E064000
Summary	CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.
Consequence	A LEAKING FUEL PUMP COULD CREATE A VEHICLE FIRE HAZARD.
Remedy	FEDERAL-MOGUL WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMPS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 15, 2007. OWNERS CAN CONTACT FEDERAL-MOGUL AT 248-354-7700.
Notes	THIS RECALL ONLY PERTAINS TO AFTERMARKET CARTER, NAPA, ACCUFLOW, TRU FLOW, PARTS MASTER, AND PARTS DEPOT BRAND FUEL PUMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED MOTOR VEHICLES.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component	SEAT BELTS:FRONT:ANCHORAGE
Manufacturer	FORD MOTOR COMPANY
Mfr Report Date	19830801
NHTSA Campaign ID	83V134000
Summary	THE BOLTS THAT ATTACH THE D-SHAPED RING FOR THE SHOULDER BELT ARE INADEQUATELY SUPPORTED BY THE MATERIAL IN WHICH THEY ARE MOUNTED. THE ATTACHMENT DOES NOT COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, 'SEAT BELT ASSEMBLY ANCHORAGES'.
Remedy	DEALERS WILL INSTALL NEW ATTACHING HARDWARE TO IMPROVE THE STRENGTH OF THE MOUNTING.
Notes	VEHICLE DESCRIPTION: PASSENGER VEHICLES AND LIGHT TRUCKS.SYSTEM: INTERIOR SYSTEMS; SEAT BELTS AND UPPER TORSO RESTRAINT ATTACHMENTS.CONSEQUENCES OF DEFECT: IN SEVERE COLLISIONS, THE SHOULDER BELT ATTACHMENTCOULD SEPARATE, INCREASING THE POSSIBILITY OF OCCUPANT INJURY.NOTE: MANUFACTURER ADVISES THAT SEAT BELTS SHOULD CONTINUE TO BE USED AT ALLTIMES, AS SUBSTANTIAL BENEFITS MAY STILL BE OBTAINED.

Component	FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM
Manufacturer	FORD MOTOR COMPANY
Mfr Report Date	19830801
NHTSA Campaign ID	84V119000
Summary	THE SECONDARY THROTTLE SHAFT MAY, WITH ACCUMULATED MILEAGE, BECOME CONTAMINATED AND MAY STICK IN A PARTIALLY OPEN POSITION WHILE DRIVING.
Consequence	CONSEQUENCE OF DEFECT: THIS STICKING COULD RESULT IN A FASTER SPEED THAN INTENDED, POSSIBLY RESUTLING IN AN ACCIDENT.
Remedy	THE PRIMARY TO SECONDARY THROTTLE CLOSURE LINK ON THE CARBURETOR WILL BE REPLACED FREE OF CHARGE.
Notes	VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 5.0 LITER ENGINES, AND TRUCKS AND MULTIPURPOSE PASSENGER VEHICLES EQUIPPED WITH 5.8 OR 7.5 LITER ENGINES; VEHICLES ARE EQUIPPED WITH 4 BARREL CARBURETORS.SYSTEM: FUEL; CARBURETOR SECONDARY THROTTLE CONTROL.

Component	FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Manufacturer	FORD MOTOR COMPANY
Mfr Report Date	19831201
NHTSA Campaign ID	84V013000
Summary	THE CLAMPS ON FLEXIBLE FUEL HOSES CONNECTING THE FUEL PUMP TO THE METAL LINE MAY NOT BE IN THE PROPER POSITION.
Remedy	THE HOSE CLAMP CONNECTING THE FUEL HOSE TO THE FUEL PUMP WILL BE INSPECTED AND RELOCATED, IF NECESSARY.
Notes	VEHICLE DESCRIPTION: TRUCKS EQUIPPED WITH 5.0 OR 5.8 LITER ENGINES.SYSTEM: FUEL SYSTEM; HOSE CLAMPS.CONSEQUENCES OF DEFECT: IN CERTAIN FRONT END COLLISIONS, THE HOSE MAY SEPARATEFROM THE FUEL PUMP AND LEAK GASOLINE IN THE ENGINE COMPARTMENT AND GROUND,POSSIBLY RESULTING IN A FIRE. THE HOSE IS NOT EXPECTED TO SEPARATE UNDER NORMALOPERATING CONDITIONS. FUEL LEAKAGE, AS A RESULT OF A SEPARATED HOSE CAUSED BY ACRASH, MAY NOT MEET THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD301, FUEL SYSTEM INTEGRITY.

Information provided by NHTSA
Data updated June 2024

1984 Averages

Avg. Household Income :	$21,600
Avg. Home :	$86,730
Avg. Gallon of Gas :	$1.10

1984 Ford Bronco FAQs (show)

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1984 Ford Bronco?
How many 1984 Ford Bronco were produced?
How powerful was the 1984 Ford Bronco? Was the 1984 Ford Bronco popular? Was the 1984 Ford Bronco expensive? What was the fuel economy of the 1984 Ford Bronco?

Q: What is the wheelbase size of the 1984 Ford Bronco? A: The 1984 Ford Bronco has wheelbase sizes of 94.00 and 104.70 inches.

Q: What is the length of the 1984 Ford Bronco? A: The 1984 Ford Bronco has lengths of 158.40 and 177.60 inches.

Q: What is the width of the 1984 Ford Bronco? A: The 1984 Ford Bronco has width of 68.00 and 77.20 inches.

Q: How much did the 1984 Ford Bronco cost when new?A: The 1984 Ford Bronco cost approximately $9,999 to $10,860 (USD) when new.

Q: What is the bodystyle of the 1984 Ford Bronco? A: The 1984 Ford Bronco was a Wagon.

Q: What tires did the 1984 Ford Bronco have? A: The 1984 Ford Bronco had P215/75R x 15SL tires.

Q: How many vehicles did Ford produce in 1984? A: Ford produced 1,180,708 automobiles in 1984.

Q: What engines did the 1984 Ford Bronco have? A: The 1984 Ford Bronco had the following engine options: V 6 (2802 cc | 171.0 cu in. | 2.8 L.) with 115 BHP (84.64 KW) @ 4600 RPM

V 8 (5752 cc | 351.0 cu in. | 5.8 L.) with 150 BHP (110.4 KW)

Q: What transmissions did the 1984 Ford Bronco have? A: The 1984 Ford Bronco had the following gearbox options: 3 speed Automatic, 5 speed Manual.