These are standard specifications for the 1988 Chevrolet Blazer, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
Manual , Automatic
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | 4WD |
| Production Years for Series : | 1973 - 1991 |
Engine & Transmission
Manual , Automatic
Production Figures
| Total Chevrolet Production for 1988 : | 1,236,316 |
| 1988 Chevrolet Blazer | |
Handling
Recall
| Component | EQUIPMENT |
|---|---|
| Manufacturer | HONEYWELL INTERNATIONAL, INC. |
| NHTSA Campaign ID | 07E088000 |
| Summary | CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES. |
| Consequence | THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE. |
| Remedy | HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075. |
| Notes | CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | PRO-A MOTORS, INC. |
| NHTSA Campaign ID | 06E026000 |
| Summary | CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. |
| Remedy | PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988. |
| Notes | THIS RECALL ONLY PERTAINS TO PRO-A MOTORS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| NHTSA Campaign ID | 93V119000 |
| Summary | SEVERE CORROSION DUE TO ROAD SALT AT THE JOINT OF THE STAMPED STEEL CENTER SECTION AND THE CAST OUTER SECTION CAN CAUSE THE SECTIONS TO SEPARATE. |
| Consequence | SEPARATION OF THE ROTOR SECTIONS CAN CAUSE LOSS OFBRAKING ABILITY IN THE AFFECTED WHEEL. THIS COULD RESULT IN INCREASED STOPPINGDISTANCE AND/OR LOSS OF VEHICLE CONTROL AND AN ACCIDENT. |
| Remedy | REPLACE THE FRONT BRAKE ROTORS WITH NEW ROTORS WITH A CORROSION PROTECTION COATING. HOWEVER, IF REPLACEMENT OF BRAKE LININGS ARE NECESSARY, IT WILL BE DONE AT OWNER'S EXPENSE SINCE BRAKE LININGS ARE NORMAL MAINTENANCE ITEMS. |
| Notes | SYSTEM: BRAKES; HYDRAULIC; DISK ROTORS.VEHICLE DESCRIPTION: LIGHT TRUCKS AND VANS SOLD OR REGISTERED IN THE FOLLOWINGSTATES: CT, IL, IN, MA, ME, MI, NH, NJ, NY, OH, PA, RI, VT, AND WI.NOTES: THE VEHICLES INVOLVED CAN BE IDENTIFIED BY THE FOLLOWING: THE 5THCHARACTER OF THE VEHICLE IDENTIFICATION NUMBER MUST BE A 'K' OR 'L', AND THESEVENTH CHARACTER MUST BE '3','4','5','6', OR '9'.IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPONSERVICE DATE, AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE AMOUNT OF TIMEAND FREE OF CHARGE OR THE REMEDY DOES NOT CORRECT THE SAFETY-RELATED DEFECT ORNONCOMPLIANCE, PLEASE CONTACT YOUR NEAREST GMC TRUCK ZONE OFFICE. THE TELEPHONENUMBERS OF THE ZONE OFFICES ARE LISTED IN YOUR WARRANTY AND OWNER'S ASSISTANCEINFORMATION MANUALS. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETYADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
| Component | FUEL SYSTEM, GASOLINE |
|---|---|
| Manufacturer | HONEYWELL INTERNATIONAL, INC. |
| NHTSA Campaign ID | 06E043000 |
| Summary | CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON 'DOCUMENT SEARCH' AND THEN 'BUS APPLICATIONS'). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE. |
| Consequence | THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR. |
| Remedy | HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1). |
| Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET FRAM FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE VEHICLES LISTED.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
Data updated January 2023
1988 Averages
| Avg. Car Cost : | $10,400 |
| Avg. Household Income : | $27,225 |
| Avg. Home : | $91,600 |
| Avg. Gallon of Gas : | $0.91 |
| Avg. Stamp : | $0 |
1988 Chevrolet Blazer FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1988 Chevrolet Blazer?
Q: What is the wheelbase size of the 1988 Chevrolet Blazer? A: The 1988 Chevrolet Blazer has a wheelbase size of 106.50 inches.Q: What is the length of the 1988 Chevrolet Blazer? A: The 1988 Chevrolet Blazer has a length of 184.80 inches.Q: What is the width of the 1988 Chevrolet Blazer? A: The 1988 Chevrolet Blazer has a width of 79.60 inches.Q: What is the bodystyle of the 1988 Chevrolet Blazer? A: The 1988 Chevrolet Blazer was a SUV.Q: How many vehicles did Chevrolet produce in 1988? A: Chevrolet produced 1,236,316 automobiles in 1988.Q: What transmissions did the 1988 Chevrolet Blazer have? A: The 1988 Chevrolet Blazer had the following gearbox options: Manual, Automatic.
What are the dimension and mechanical specifications of the 1988 Chevrolet Blazer?
How many 1988 Chevrolet Blazer were produced?
How powerful was the 1988 Chevrolet Blazer? Was the 1988 Chevrolet Blazer popular? Was the 1988 Chevrolet Blazer expensive? What was the fuel economy of the 1988 Chevrolet Blazer?
Q: What is the wheelbase size of the 1988 Chevrolet Blazer? A: The 1988 Chevrolet Blazer has a wheelbase size of 106.50 inches.Q: What is the length of the 1988 Chevrolet Blazer? A: The 1988 Chevrolet Blazer has a length of 184.80 inches.Q: What is the width of the 1988 Chevrolet Blazer? A: The 1988 Chevrolet Blazer has a width of 79.60 inches.Q: What is the bodystyle of the 1988 Chevrolet Blazer? A: The 1988 Chevrolet Blazer was a SUV.Q: How many vehicles did Chevrolet produce in 1988? A: Chevrolet produced 1,236,316 automobiles in 1988.Q: What transmissions did the 1988 Chevrolet Blazer have? A: The 1988 Chevrolet Blazer had the following gearbox options: Manual, Automatic.Similarly Sized Vehicles
from 1988
Chevrolet Monthly Sales Volume
March 2023
398,141