These are standard specifications for the 1995 Mitsubishi Eclipse, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
5 Manual , 4 Automatic
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Front Wheel |
| Body / Chassis : | Steel unibody |
| Production Years for Series : | 1995 - 1999 |
| Price : | $14,400-$23,000 |
| Weight : | 2700 lbs | 1224.699 kg |
Performance
| 0-60 mph : | 7 seconds. |
Engine & Transmission
| Inline 4 | |
|---|---|
| Displacement : | 1996 cc | 121.8 cu in. | 2.0 L. |
| Power : | 140 BHP (103.04 KW) @ 6000 RPM |
| Torque : | 130 Ft-Lbs (176 NM) @ 4800 RPM |
| Bore : | 3.4 in | 87 mm. |
| Stroke : | 3.3 in | 83 mm. |
| Compression : | 9.6:1 |
| Valvetrain : | 16 DOHC (4 valves per cylinder) |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Light Alloy |
| Ignition system : | multi-point fuel inject |
| Turbocharged Inline 4 | |
|---|---|
| Displacement : | 1996 cc | 121.8 cu in. | 2.0 L. |
| Power : | 205 BHP (150.88 KW) @ 5500 RPM |
| Torque : | 220 Ft-Lbs (298 NM) @ 3000 RPM |
| Bore : | 3.4 in | 85 mm. |
| Stroke : | 3.5 in | 88 mm. |
| Compression : | 8.5:1 |
| Valvetrain : | 16 DOHC (4 valves per cylinder) |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Light Alloy |
| Ignition system : | multi-point fuel inject |
5 Manual , 4 Automatic
Production Figures
| Total Mitsubishi Production for 1995 : | 175,267 |
| 1995 Mitsubishi Eclipse | |
Handling
Recall
| Component | FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
|---|---|
| Manufacturer | AIRTEX PRODUCTS |
| NHTSA Campaign ID | 07E055000 |
| Summary | CERTAIN AIRTEX FUEL PUMP MODULE ASSEMBLIES, P/N E7081H, SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR THE VEHICLES LISTED ABOVE. THE WALL OF THE FLARED FITTING OF THE FUEL PUMP IS NOT THICK ENOUGH TO PREVENT THE MATING THREADED FITTINGS FROM BOTTOMING OUT BEFORE AN ADEQUATE SEAL IS ACHIEVED. THIS CONDITION MAY RESULT IN LEAKAGE OF FUEL AT THE CONNECTION OF THE VEHICLE FUEL LINE AND THE FUEL PUMP MODULE ASSEMBLY. |
| Consequence | IN THE PRESENCE OF AN IGNITION SOURCE, A FUEL LEAK COULD RESULT IN A FIRE. |
| Remedy | AIRTEX WILL NOTIFY OWNERS AND REPLACE THE FUEL PUMPS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING JULY 2007. OWNERS CAN CONTACT AIRTEX AUTOMOTIVE AT 800-880-3056. |
| Notes | AIRTEX RECALL NO. FP072007-1.THIS RECALL ONLY PERTAINS TO AFTERMARKET REPLACEMENT EQUIPMENT AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY DAIMLERCHRYSLER OR MITSUBISHI.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING:HEADLIGHTS |
|---|---|
| Manufacturer | ANZO USA, INC. |
| NHTSA Campaign ID | 06E023000 |
| Summary | CERTAIN ANZO COMBINATION HEADLAMP ASSEMBLIES SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS WHICH FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, 'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.' |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH. |
| Remedy | ANZO WILL NOTIFY OWNERS AND REPLACE THE HEADLAMPS FREE OF CHARGE. THE RECALL BEGAN MAY 9, 2006. OWNERS MAY CONTACT ANZO USA AT 909-468-3688. |
| Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET HEADLAMP ASSEMBLIES MANUFACTURED BY ANZO AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | PRO-A MOTORS, INC. |
| NHTSA Campaign ID | 06E026000 |
| Summary | CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. |
| Remedy | PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988. |
| Notes | THIS RECALL ONLY PERTAINS TO PRO-A MOTORS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | CK MOTORSPORT, INC. |
| NHTSA Campaign ID | 06E049000 |
| Summary | CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. |
| Remedy | CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211. |
| Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET REPLACEMENT EQUIPMENT AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY THE VEHICLE MANUFACTURERS.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | AAI MOTORSPORTS USA, LLC |
| NHTSA Campaign ID | 06E060000 |
| Summary | CERTAIN AAI MOTORSPORTS COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LIST PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, 'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.' |
| Consequence | LACK OF AMBER SIDE REFLECTORS IN THE LAMPS WILL DECREASE LIGHTING VISIBILITY TO OTHER DRIVERS AND MAY POSSIBLY RESULT IN A VEHICLE CRASH |
| Remedy | AAI MOTORSPORTS WILL NOTIFY OWNERS AND REPLACE THE LAMPS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 1, 2006. OWNERS MAY CONTACT AAI MOTORSPORTS AT 909-923-9188. |
| Notes | THIS RECALL ONLY PERTAINS TO AAI MOTORSPORTS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION |
|---|---|
| Manufacturer | MITSUBISHI AMERICA |
| Mfr Report Date | 19890515 |
| NHTSA Campaign ID | 98V069001 |
| Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. LOCKUP OF THE TRANSFER CASE CAN OCCUR DUE TO INSUFFICIENT LUBRICATION. |
| Consequence | THIS CONDITION CAN CAUSE A LOSS OF VEHICLE CONTROL, INCREASING THE RISK OF A CRASH. |
| Remedy | DEALERS WILL INSPECT THE VEHICLES FOR ADEQUACY OF THE TRANSFER CASE OIL VOLUME, TRANSFER CASE OIL LEAKAGE, AND OPERATIONAL DEGRADATION OF THE TRANSFER CASE MECHANISM. IF OIL VOLUME IS INSUFFICIENT, THE APPROPRIATE AMOUNT OF OIL WILL BE ADDED. IF THERE IS TRANSFER CASE OIL LEAKAGE, AFFECTED COMPONENTS WILL BE REPLACED. IF THE TRANSFER CASE SHOWS OPERATIONAL DEGRADATION, THE TRANSFER CASE WILL BE REPLACED. |
| Notes | OWNER NOTIFICATION IS EXPECTED TO BEGIN APRIL 20, 1998.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MITSUBISHI AT 1-800-222-0037.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| Component | SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT |
|---|---|
| Manufacturer | MITSUBISHI AMERICA |
| Mfr Report Date | 19940121 |
| NHTSA Campaign ID | 99V066001 |
| Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE. |
| Consequence | THIS CONDITION COULD CAUSE THE LOWER LATERAL ARM BALL JOINT TO SEPARATE, INCREASING THE RISK OF A VEHICLE CRASH. |
| Remedy | DEALERS WILL INSPECT THE RUBBER BOOTS, AND IF THE BOOT IS DAMAGED, THEY WILL REPLACE THE LOWER LATERAL ARM AND BALL JOINT ON THE AFFECTED VEHICLES. |
| Notes | OWNER NOTIFICATION BEGAN JUNE 15, 1999. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MITSUBISHI AT 1-800-222-0037. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| Component | SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP |
|---|---|
| Manufacturer | MITSUBISHI AMERICA |
| Mfr Report Date | 19940201 |
| NHTSA Campaign ID | 94V149002 |
| Summary | THE HEADLAMP SUPPORT PANEL CAN DEVELOP A FATIGUE CRACK WHERE THE ANTI-LOCK BRAKE SYSTEM (ABS) HYDRAULIC UNIT IS ATTACHED, ALLOWING THE HYDRAULIC UNIT TO FALL DOWN. |
| Consequence | LOSS OF BRAKING CAN RESULT IF THE ABS HYDRAULIC UNIT FALLS. THIS CAN RESULT IN A VEHICLE ACCIDENT. |
| Remedy | DEALERS WILL CONNECT THE ABS HYDRAULIC UNIT ATTACHMENT POINT AT A RIGID PORTION OF THE HEADLAMP SUPPORT PANEL WITH A BRACKET AND REINFORCE THE HEADLAMP SUPPORT PANEL BY ADDING A BACK PLATE. |
| Notes | SYSTEM: BRAKES; HYDRAULIC; ANTI-SKID.VEHICLE DESCRIPTION: PASSENGER CARS.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLETIME OR THE REMEDY DOES NOT CORRECT THE DEFECT, PLEASE CONTACT MITSUBISHI SERVICE CENTER AT 1-800-222-0037. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
| Component | FUEL SYSTEM, GASOLINE |
|---|---|
| Manufacturer | MITSUBISHI AMERICA |
| Mfr Report Date | 19940301 |
| NHTSA Campaign ID | 96V158001 |
| Summary | THE FUEL TANK GASKETS FOR THE FUEL PUMP AND/OR GAUGE UNIT GASKET COULD HAVE BEEN INCORRECTLY INSTALLED ALLOWING FUEL OR FUMES TO ESCAPE. |
| Consequence | IF AN IGNITION SOURCE WERE PRESENT, THE FUEL LEAKAGE COULD RESULT IN A FIRE. |
| Remedy | DEALERS WILL INSPECT THE FUEL TANK AND IF THE GASKETS ARE FOUND TO BE LEAKING, REPLACE THE FUEL TANK, CAPS AND GASKETS. |
| Notes | OWNER NOTIFICATION BEGAN AUGUST 21, 1996. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MITSUBISHI AT 1-800-222-0037.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
| Component | SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT |
|---|---|
| Manufacturer | MITSUBISHI AMERICA |
| Mfr Report Date | 19940301 |
| NHTSA Campaign ID | 00V421001 |
| Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE. ALSO, MMC HAS ADDED THE POTENTIAL OF LEAKING MOISTURE, WHICH CAN CAUSE THE BALL STUD TO CORRODE. |
| Consequence | THIS CONDITION COULD CAUSE THE LOWER LATERAL ARM BALL JOINT TO SEPARATE, INCREASING THE RISK OF A VEHICLE CRASH. THIS CAMPAIGN SUPERCEDES MMC'S PREVIOUS SAFETY RECALL CAMPAIGN, SEE 99V-066. |
| Remedy | DEALERS WILL INSPECT THE LOWER LATERAL ARM BALL JOINT FOR WEAR. BALL JOINTS THAT EXHIBIT WEAR BEYOND THE ESTABLISHED TOLERANCE WILL BE REPLACED WITH NEWLY DESIGNED LATERAL ARM BALL JOINTS. BALL JOINTS THAT ARE WITHIN THE ESTABLISHED TOLERANCE WILL BE CLEANED AND A SPECIAL SEALANT WILL BE APPLIED TO PREVENT INTRUSION OF MOISTURE. |
| Notes | OWNER NOTIFICATION WILL BE CONDUCTED IN PHASES.THE FIRST PHASE BEGAN APRIL 2, 2001, AND THE FINAL PHASE WILL BE COMPLETED ON SEPTEMBER 3, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MITSUBISHI AMERICA AT 1-888-MITSU-2001 (1-888-648-7820).ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Data updated January 2023
1995 Averages
| Avg. Car Cost : | $15,500 |
| Avg. Household Income : | $35,900 |
| Avg. Home : | $113,150 |
| Avg. Gallon of Gas : | $1.10 |
| Avg. Stamp : | $0 |
| Total Car Production : | 11,985,457 |
1995 Mitsubishi Eclipse FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1995 Mitsubishi Eclipse?
Q: What is the wheelbase size of the 1995 Mitsubishi Eclipse? A: The 1995 Mitsubishi Eclipse has a wheelbase size of 98.80 inches.Q: What is the length of the 1995 Mitsubishi Eclipse? A: The 1995 Mitsubishi Eclipse has a length of 172.20 inches.Q: What is the width of the 1995 Mitsubishi Eclipse? A: The 1995 Mitsubishi Eclipse has a width of 68.30 inches.Q: How much did the 1995 Mitsubishi Eclipse cost when new?A: The 1995 Mitsubishi Eclipse cost approximately $14,400 to $23,000 (USD) when new.Q: What is the bodystyle of the 1995 Mitsubishi Eclipse? A: The 1995 Mitsubishi Eclipse was a HatchBack.Q: How many vehicles did Mitsubishi produce in 1995? A: Mitsubishi produced 175,267 automobiles in 1995.Q: What engines did the 1995 Mitsubishi Eclipse have? A: The 1995 Mitsubishi Eclipse had the following engine options: Inline 4 (1996 cc | 121.8 cu in. | 2.0 L.) with 140 BHP (103.04 KW) @ 6000 RPM and 130 Ft-Lbs (176 NM) @ 4800 RPM Turbocharged Inline 4 (1996 cc | 121.8 cu in. | 2.0 L.) with 205 BHP (150.88 KW) @ 5500 RPM and 220 Ft-Lbs (298 NM) @ 3000 RPM Q: What transmissions did the 1995 Mitsubishi Eclipse have? A: The 1995 Mitsubishi Eclipse had the following gearbox options: 5 speed Manual, 4 speed Automatic.