conceptcarz.com

2000 Ferrari 360 Modena Specifications

These are standard specifications for the 2000 Ferrari 360 Modena, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Mid
Drive Type : Rear Wheel
Body / Chassis : Aluminium
Production Years for Series : 1999 - 2004
Body Designer : Pininfarina
Price : $138,230
Weight : 3070 lbs | 1392.529 kg
Introduced At : 1999 Geneva, Switzerland
0-60 mph : 4.2 seconds.
1/4 Mile : 12.81 sec @ 112.5 mph
Top Speed : 190 mph | 305.71 km/h
V 8
Displacement : 3586 cc | 218.8 cu in. | 3.6 L.
Power : 395 BHP (290.72 KW) @ 8500 RPM
Torque :275 Ft-Lbs (373 NM) @ 4750 RPM
Bore : 3.4 in | 85 mm.
Stroke : 3.1 in | 79 mm.
Valvetrain : 40 DOHC (5 valves per cylinder)
Redline : 8500 RPM
Transmission:
6 Manual

Coupe

Coupe
Coupe
Chassis # 118784
Coupe
Coupe
Coupe
Coupe
Body Designer : Pininfarina
Cargo Volume : 4 cu. ft.
Seating Capacity : 2
Doors : 2
Exterior
Length : 176.3 in | 4478 mm.
Width : 75.7 in | 1923 mm.
Wheelbase : 102.4 in | 2601 mm.
Front Track : 65.7 in | 1669 mm.
Rear Track : 63.7 in | 1618 mm.

Suspension
Aluminum double wishbones, coil springs over electronic Sachs dampers, anti dive and anti squat

Steering
Rack and Pinion

Brakes
Front Brake Size : 330.0 mm | 12.992 in.
Rear Brake Size : 330.0 mm | 12.992 in.

Tires / Wheels
Tires : Front : 215/45 ZR18
Rear : 275/40 ZR18

Component

POWER TRAIN:CLUTCH ASSEMBLY

Manufacturer

FERRARI NORTH AMERICA

Mfr Report Date19981201
NHTSA Campaign ID00V340000
SummaryVEHICLE DESCRIPTION: PASSENGER VEHICLES. THE STARTER RING GEAR, WHICH IS ATTACHED TO THE CLUTCH ASSEMBLY WITH THREE MOUNTING SCREWS, COULD BECOME SEPARATED FROM THE CLUTCH ASSEMBLY. THIS POSSIBLE FAILURE COULD BE CAUSED BY (1) THE FRACTURE OF THE STARTER RING GEAR ITSELF AT THE MOUNTING HOLES DUE TO AN INCORRECT POSITIONING OF THE MOUNTING HOLES, OR (2) BY THE FAILURE OF THE MOUNTING SCREWS. IF EITHER OF THESE CONDITIONS WOULD OCCUR, THE RESULT WOULD BE FRAGMENTS OF THE STARTER RING GEAR BEING THROWN FROM THE CLUTCH AREA.
ConsequenceIF THESE FRAGMENTS CAME INTO CONTACT WITH THE VEHICLE'S TIRE, A PUNCTURE COULD OCCUR RESULTING IN LOSS OF VEHICLE CONTROL.
RemedyDEALERS WILL (1) REPLACE THE STARTER RING GEAR MOUNTING SCREWS AND MEASURING THE STARTER RING GEAR MOUNTING HOLES. THE MEASUREMENT OF THE STARTER RING GEAR WILL DETERMINE IF THE CORRECT POSITION OF THE MOUNTING HOLES EXISTS AND IF THE POSITION IS INCORRECT, THE STARTER RING GEAR WILL ALSO BE REPLACED; OR (2) REPLACE THE STARTER RING GEAR WITH A NEW RING GEAR HAVING THE CORRECTLY POSITIONED MOUNTING HOLES AND THE REPLACEMENT OF THE MOUNTING SCREWS.
NotesOWNER NOTIFICATION BEGAN OCTOBER 31, 2000.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FERRARI AT 1-201-816-2651.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).

Information provided by NHTSA
Data updated January 2023
2000 Averages
Avg. Car Cost : $24,750
Avg. Household Income : $40,343
Avg. Home : $134,150
Avg. Gallon of Gas : $1.46
Avg. Stamp : $0
Total Car Production : 12,799,857

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 2000 Ferrari 360 Modena?
How many 2000 Ferrari 360 Modena were produced?
How powerful was the 2000 Ferrari 360 Modena? Was the 2000 Ferrari 360 Modena popular? Was the 2000 Ferrari 360 Modena expensive? What was the fuel economy of the 2000 Ferrari 360 Modena?

Q: How fast is the 2000 Ferrari 360 Modena? A: The 2000 Ferrari 360 Modena has a top speed of 190 mph.

Q: What is the wheelbase size of the 2000 Ferrari 360 Modena? A: The 2000 Ferrari 360 Modena has a wheelbase size of 102.40 inches.

Q: What is the length of the 2000 Ferrari 360 Modena? A: The 2000 Ferrari 360 Modena has a length of 176.30 inches.

Q: What is the width of the 2000 Ferrari 360 Modena? A: The 2000 Ferrari 360 Modena has a width of 75.70 inches.

Q: How much did the 2000 Ferrari 360 Modena cost when new?A: The 2000 Ferrari 360 Modena had a base price of approximately $138,230 (USD).

Q: What is the bodystyle of the 2000 Ferrari 360 Modena? A: The 2000 Ferrari 360 Modena was a Coupe.

Q: What tires did the 2000 Ferrari 360 Modena have? A: The 2000 Ferrari 360 Modena had Front : 215/45 ZR18
Rear : 275/40 ZR18 tires.

Q: What engine did the 2000 Ferrari 360 Modena have? A: The engine powering the 2000 Ferrari 360 Modena was a V 8 (3586 cc | 218.8 cu in. | 3.6 L.) with 395 BHP (290.72 KW) @ 8500 RPM and 275 Ft-Lbs (373 NM) @ 4750 RPM.

Q: What transmission did the 2000 Ferrari 360 Modena have? A: The 2000 Ferrari 360 Modena had a 6 speed Manual gearbox.