1990 Ferrari 348 Specifications

Specifications

1989 1990 1992 1994 1995

Features

Engine Location :	Mid
Drive Type :	Rear Wheel
Body / Chassis :	Unibody
Production Years for Series :	1989 - 1995
Body Designer :	Pininfarina
Weight :	3175 lbs \| 1440.156 kg

Engine & Transmission

V 8 \| Vee-Type
Displacement :	3409 cc \| 208.0 cu in. \| 3.4 L.
Power :	312 BHP (229.632 KW) @ 7200 RPM
Torque :	238 Ft-Lbs (323 NM) @ 4200 RPM
Bore :	3.4 in \| 85 mm.
Stroke :	3.0 in \| 75 mm.
Compression :	10.4:1
Main Bearings :	5
Valvetrain :	32 DOHC (4.0 valves per cylinder)
Bosch Motronic 2.5 port fuel injection

Transmission:
5 Manual In rear transaxle

Production Figures

348 Spider Production (1989-1995) :	1,146
1990 Ferrari 348

Dimension(s)

Targa Coupe

Chassis # 86949

Chassis # ZFFFG36A2L0088190
View info And history
Auction entries : 1

Exterior
Body Designer :	Pininfarina
Seating Capacity :	2
Doors :	2
Length :	166.7 in \| 4234 mm.
Width :	74.6 in \| 1895 mm.
Height :	46.1 in \| 1171 mm.
Wheelbase :	96.5 in \| 2451 mm.
Front Track :	59.2 in \| 1504 mm.
Rear Track :	62.2 in \| 1580 mm.

Coupe

Chassis # ZFFFA35AXK0082673
View info And history
Auction entries : 2

Exterior
Body Designer :	Pininfarina
Weight :	3170 lbs \| 1437.888 kg
Seating Capacity :	2
Doors :	2
Length :	166.7 in \| 4234 mm.
Width :	74.6 in \| 1895 mm.
Height :	46.1 in \| 1171 mm.
Wheelbase :	96.5 in \| 2451 mm.
Front Track :	59.2 in \| 1504 mm.
Rear Track :	62.2 in \| 1580 mm.

TS Challenge Coupe

Chassis # ZFFFG36AXL0086947
Engine # 23930
View info And history
Auction entries : 3

Exterior
Body Designer :	Pininfarina
Seating Capacity :	2
Doors :	2
Length :	166.7 in \| 4234 mm.
Width :	74.6 in \| 1895 mm.
Height :	46.1 in \| 1171 mm.
Wheelbase :	96.5 in \| 2451 mm.
Front Track :	59.2 in \| 1504 mm.
Rear Track :	62.2 in \| 1580 mm.

Handling

Suspension
Front : Unequal-length A-arms with coil springs and anti-roll bar Rear : Unequal-length A-arms with coil springs and anti-roll bar

Steering
Rack and Pinion

Recall

Component	STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
Manufacturer	FERRARI NORTH AMERICA
Mfr Report Date	19890701
NHTSA Campaign ID	92V073000
Summary	THE STEERING BOX EXTENSION FASTENERS WERE MANUFACTURED WITH INFERIOR MATERIAL.
Consequence	THE FASTENER CAN LOOSEN, CAUSING PLAY IN THE STEERINGSYSTEM AND IMPAIRED HANDLING.
Remedy	REPLACE STEERING BOX EXTENSION FASTENER WITH A NEW FASTENER CONSTRUCTED WITH IMPROVED STRENGTH AND SELF-LOCKING PROPERTIES.
Notes	SYSTEM: STEERING.VEHICLE DESCRIPTION: PASSENGER CARS WITH VIN LOWER THAN 86232.

Component	STEERING: STEERING WHEEL/HANDLE BAR
Manufacturer	FERRARI NORTH AMERICA
Mfr Report Date	19890701
NHTSA Campaign ID	92V072000
Summary	THE UPPER STEERING COLUMN LOCKNUT WAS MANUFACTURED WITH INFERIOR MATERIALS AND INFERIOR SELF-LOCKING PROPERTIES.
Consequence	THE LOCKNUT CAN LOOSEN, CAUSING EXCESSIVE PLAY IN THESTEERING SYSTEM AND IMPAIRED HANDLING. THIS COULD RESULT IN LOSS OF VEHICLECONTROL AND AN ACCIDENT.
Remedy	REPLACE LOCKNUT WITH AN IMPROVED LOCKNUT.
Notes	SYSTEM: STEERING.VEHICLE DESCRIPTION: PASSENGER CARS WITH VIN LOWER THAN 87898.

Component	FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
Manufacturer	FERRARI NORTH AMERICA
Mfr Report Date	19890701
NHTSA Campaign ID	92V071000
Summary	THE ALUMINUM FUEL LINE FITTINGS ON CERTAIN FUEL INJECTION LINES CORRODE, CAUSING THE FUEL LINE FITTINGS TO BREAK.
Consequence	THE BREAKAGE OF THE FUEL LINE FITTING CAUSES FUELLEAKAGE, RESULTING IN INCREASED RISK OF FIRE IN THE PRESENCE OF A SOURCE OFIGNITION.
Remedy	REPLACE THE FUEL LINES WITH MODIFIED LINES CONSTRUCTED WITH A CORROSION RESISTANT COATING TO PREVENT FUEL LINE SURFACE CORROSION.
Notes	SYSTEM: FUEL LINES.VEHICLE DESCRIPTION: PASSENGER CARS WITH VIN LOWER THAN 88386.

Information provided by NHTSA
Data updated June 2024

1990 Averages

Avg. Car Cost :	$16,000
Avg. Household Income :	$28,970
Avg. Home :	$123,000
Avg. Gallon of Gas :	$1.12
Total Car Production :	9,782,997

1990 Ferrari 348 FAQs (show)

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1990 Ferrari 348?
How many 1990 Ferrari 348 were produced?
How powerful was the 1990 Ferrari 348? Was the 1990 Ferrari 348 popular? Was the 1990 Ferrari 348 expensive? What was the fuel economy of the 1990 Ferrari 348?

Q: What is the wheelbase size of the 1990 Ferrari 348? A: The 1990 Ferrari 348 has a wheelbase size of 96.50 inches.

Q: What is the length of the 1990 Ferrari 348? A: The 1990 Ferrari 348 has a length of 166.70 inches.

Q: What is the width of the 1990 Ferrari 348? A: The 1990 Ferrari 348 has a width of 74.60 inches.

Q: What were the bodystyles of the 1990 Ferrari 348? A: The 1990 Ferrari 348 was offered as a Coupe, Targa Coupe, TS Challenge Coupe.

Q: How many 348 Spider were produced? A: Ferrari produced 1,146 examples of the 348 Spider from 1989 to 1995.

Q: What engine did the 1990 Ferrari 348 have? A: The engine powering the 1990 Ferrari 348 was a V 8Vee-Type (3409 cc | 208.0 cu in. | 3.4 L.) with 312 BHP (229.632 KW) @ 7200 RPM and 238 Ft-Lbs (323 NM) @ 4200 RPM.

Q: What transmission did the 1990 Ferrari 348 have? A: The 1990 Ferrari 348 had a 5 speed Manual In rear transaxle gearbox.