1975 Buick LeSabre Specifications

These are standard specifications for the 1975 Buick LeSabre, not necessarily specifications for the vehicle(s) in the photo(s).

Features

Engine Location :	Front
Drive Type :	Rear Wheel
Production Years for Series :	1971 - 1976
Price :	$4,770-$5,590
Weight :	4350 lbs \| 1973.127 kg

Engine & Transmission

V 8
Displacement :	5735 cc \| 350.0 cu in. \| 5.7 L.
Power :	145 HP (106.72 KW) @ 3800 RPM
Bore :	3.8 in \| 97 mm.
Stroke :	3.9 in \| 98 mm.
Compression :	8.0:1
Cylinder Block :	Cast-iron
2-barrel carburetor

V 8
Displacement :	5735 cc \| 350.0 cu in. \| 5.7 L.
Power :	165 BHP (121.44 KW) @ 4000 RPM
Bore :	3.8 in \| 97 mm.
Stroke :	3.9 in \| 98 mm.
Compression :	8.0:1
Cylinder Block :	Cast-iron
4-Barrel Carburetor

Transmission:
3 Automatic

Production Figures

Total Buick Production for 1975 :	481,768
Total 1975 LeSabre production :	122,941
1975 Buick LeSabre
9-Passenger Station Wagon 4 dr. 9 P :	9,612
Convertible 2 dr. 6 P :	5,300
Custom Hardtop Coupe 2 dr. 6 P :	25,016
Custom Hardtop Sedan 4 dr. 6 P :	30,005
Custom Sedan 4 dr. 6 P :	17,026
Hardtop Coupe 2 dr. 6 P :	8,647
Hardtop Sedan 4 dr. 6 P :	9,119
Sedan 4 dr. 6 P :	14,088
Station Wagon 4 dr. 6 P :	4,128

Dimension(s)

Sedan

Exterior
Seating Capacity :	6
Doors :	4
Length :	226.9 in \| 5763 mm.
Wheelbase :	123.5 in \| 3137 mm.

Hardtop Sedan

Exterior
Price :	$4,890
Weight :	4410 lbs \| 2000.342 kg
Seating Capacity :	6
Doors :	4
Length :	226.9 in \| 5763 mm.
Wheelbase :	123.5 in \| 3137 mm.

Hardtop Coupe

Exterior
Price :	$4,840
Weight :	4295 lbs \| 1948.179 kg
Seating Capacity :	6
Doors :	2
Length :	226.9 in \| 5763 mm.
Wheelbase :	123.5 in \| 3137 mm.

Custom Sedan

Exterior
Price :	$4,940
Weight :	4400 lbs \| 1995.806 kg
Seating Capacity :	6
Doors :	4
Length :	226.9 in \| 5763 mm.
Wheelbase :	123.5 in \| 3137 mm.

Custom Hardtop Sedan

Exterior
Price :	$5,060
Weight :	4440 lbs \| 2013.95 kg
Seating Capacity :	6
Doors :	4
Length :	226.9 in \| 5763 mm.
Wheelbase :	123.5 in \| 3137 mm.

Custom Hardtop Coupe

Exterior
Price :	$5,000
Weight :	4315 lbs \| 1957.251 kg
Seating Capacity :	6
Doors :	2
Length :	226.9 in \| 5763 mm.
Wheelbase :	123.5 in \| 3137 mm.

Convertible

Chassis # 4P67J5Y123611
View info And history
Auction entries : 1

View info And history
Auction entries : 1

Exterior
Price :	$5,130
Weight :	4390 lbs \| 1991.271 kg
Seating Capacity :	6
Doors :	2
Length :	226.9 in \| 5763 mm.
Wheelbase :	123.5 in \| 3137 mm.

9-Passenger Station Wagon

Exterior
Price :	$5,590
Weight :	5130 lbs \| 2326.929 kg
Seating Capacity :	9
Doors :	4
Length :	226.9 in \| 5763 mm.
Wheelbase :	127.0 in \| 3226 mm.

Station Wagon

Exterior
Price :	$5,445
Weight :	5050 lbs \| 2290.641 kg
Seating Capacity :	6
Doors :	4
Length :	226.9 in \| 5763 mm.
Wheelbase :	127.0 in \| 3226 mm.

Handling

Tires / Wheels
Tires :	HR78-15

Recall

Component	VEHICLE SPEED CONTROL
Manufacturer	GENERAL MOTORS CORP.
NHTSA Campaign ID	74V140000
Notes	OLDSMOBILE CAMPAIGN NO 75-C-2.OTHERS N/A.POSSIBILITY VEHICLES EQUIPPED WITHROCHESTER 4 BBL.QUADRAJET CARBURETORS MAY HAVE HAD AN INCORRECT FAST IDLE CAMFOLLOWER LEVER INSTALLED.THIS CONDITION COULD CAUSE BINDING ON THE SECONDARYTHROTTLE PLATE LOCK OUT LEVER AT THE WIDE OPEN THROTTLE AND NOT ALLOW THEENGINE TO RETURN TO IDLE.SUCH A CONDITION COULD MAKE A VEHICLE DIFFICULT TOCONTROL.(CORRECT BY INSPECTING AND REPLACING CARBURETOR FOUND WITH ANINCORRECT LEVER.)

Component	WHEELS:HUBCAP/COVER
Manufacturer	GENERAL MOTORS CORP.
NHTSA Campaign ID	74V217000
Notes	PONTIAC CAMPAIGN NO 75-C-5.OLDSMOBILE CAMPAIGN NO 75-C-5.BUICK CAMPAIGN NO75-C-4.POSSIBILITY THAT THE CENTER SPIDER SECTION OF THE WHEEL TO RIM MAYSEPARATE DUE TO INADEQUATE WELDING OF THE SPIDER.(CORRECT BY INSPECTING ANDREPLACING WITH NEW WHEEL WHERE NECESSARY.)

Component	WHEELS
Manufacturer	GENERAL MOTORS CORP.
NHTSA Campaign ID	75V142000
Notes	BUICK CAMPAIGN NO 75-C-12.PONTIAC CAMPAIGN NO 75-C-13.POSSIBILITY THAT THECENTER SECTION OF THE WHEEL MAY HAVE BEEN IMPROPERLY WELDED TO THE RIM.AS ARESULT, RIM COULD SEPARATE FROM CENTER SECTION OF THE WHEEL.IF THIS HAPPENSWHILE VEHICLE IS IN MOTION, IT MAY RESULT IN LOSS OF CONTROL AND A VEHICLECRASH COULD OCCUR WITHOUT PRIOR WARNING.(CORRECT BY INSPECTING AND REPLACINGWHEEL WHERE NECESSARY.)

Information provided by NHTSA
Data updated January 2023

1975 Averages

Avg. Car Cost :	$4,250
Avg. Household Income :	$14,100
Avg. Home :	$39,300
Avg. Gallon of Gas :	$0.44

1975 Buick LeSabre FAQs (show)

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1975 Buick LeSabre?
How many 1975 Buick LeSabre were produced?
How powerful was the 1975 Buick LeSabre? Was the 1975 Buick LeSabre popular? Was the 1975 Buick LeSabre expensive? What was the fuel economy of the 1975 Buick LeSabre?

Q: What is the wheelbase size of the 1975 Buick LeSabre? A: The 1975 Buick LeSabre has wheelbase sizes of 123.50 and 127.00 inches.

Q: What is the length of the 1975 Buick LeSabre? A: The 1975 Buick LeSabre has a length of 226.90 inches.

Q: How much did the 1975 Buick LeSabre cost when new?A: The 1975 Buick LeSabre cost approximately $4,770 to $5,590 (USD) when new.

Q: What were the bodystyles of the 1975 Buick LeSabre? A: The 1975 Buick LeSabre was offered as a 9-Passenger Station Wagon, Convertible, Custom Hardtop Coupe, Custom Hardtop Sedan, Custom Sedan, Hardtop Coupe, Hardtop Sedan, Sedan, Station Wagon.

Q: What tires did the 1975 Buick LeSabre have? A: The 1975 Buick LeSabre had HR78-15 tires.

Q: How many vehicles did Buick produce in 1975? A: Buick produced 481,768 automobiles in 1975.

Q: How many 1975 LeSabres were produced? A: Buick produced 122,941 examples of the LeSabre in 1975.

Q: What engines did the 1975 Buick LeSabre have? A: The 1975 Buick LeSabre had the following engine options: V 8 (5735 cc | 350.0 cu in. | 5.7 L.) with 145 HP (106.72 KW) @ 3800 RPM

V 8 (5735 cc | 350.0 cu in. | 5.7 L.) with 165 BHP (121.44 KW) @ 4000 RPM

Q: What transmission did the 1975 Buick LeSabre have? A: The 1975 Buick LeSabre had a 3 speed Automatic gearbox.