1967 Ferrari 365 GTC Prototipo

1967 Ferrari 365 GTC Prototipo 1967 Ferrari 365 GTC Prototipo 1967 Ferrari 365 GTC Prototipo
Coupe
Chassis #: 10581
Engine #: 10581
Sold for $385,000 at 2007 Gooding & Company.
Sold for $885,000 at 2013 Bonhams - The Scottsdale Auction.
The Ferrari 365 GTC was a continuation of the 330 GTC in terms of style and mechanical components. The 330 GTC had been a popular car so Ferrari decided to increase its performance, power, and torque, make a few cosmetic changes, and breathe another year of life into the elegant Grand Touring car. The engine size was increased to displace 4.4-liters, which was .4 liters larger than the 330's. The 365 GTC's stable mates, the 365 GTB/4 Daytona and the 365 GT 2+2, were updated to comply with the North American emissions and safety laws. The 365 GTC did not receive these updates so it was only available for sale in markets outside of the US.

Production lasted only a year; around 33-percent of the 150 cars produced were right-hand drive vehicles.

The first 365 GTC was serial number 11823. This 365 GTC has chassis number 10581 which is lower than the first production 365 GTC. 10581 is actually a 330 GTC but with a 365 engine, making this a 'Speciale', 'Prototipo', or one-off.

The original owner of this car was Leopoldo Pirelli, CEO of Pirelli, S.P.A. The car was intended to test tires and was the first Ferrari to be fitted with Campagnolo 'Star' wheels. The wheels would later become a feature on the Daytona Ferrari. Under the bonnet is a Single Overhead Camshaft V12 engine with three Weber Twin-Choke carburetors that produce an impressive 320 horsepower. There is a five-speed manual gearbox and an independent front suspension. Since it is actually a 330 GTC, it does not have many of the revisions found on the production 365 GTCs.

To compensate for the additional power and to facilitate his testing, the car was to receive custom handmade 15 inch Campagnolo magnesium alloy wheels, being the first GT so delivered.

It has been in the same care since the spring of 1978. In 2007 the car was offered for sale at the Gooding & Company auction held in Pebble Beach, California where it was estimated to sell for $345,000 - $425,000. Those estimates proved accurate as the lot was sold for $385,000 including buyer's premium.


By Daniel Vaughan | Feb 2013
The 365 Series were introduced in the late 1960's and stayed in production until the early 1970's. The 365's were often powered by a Columbo SOHC 4390 cc V-12 engine with three Weber carburetors capable of producing around 300 horsepower. The front and rear suspension for most of the series was independent with double wishbones and coil springs. The 365 GT4 2+2 had an independent with transverse parallelograms and coil springs suspension. The 365 California had a live axle with coil springs rear suspension. The chassis was an oval tube ladder type frame layout.

Disc brakes were standard on all the vehicles, as was the five-speed manual gearbox. Many of the series received standard options such as power steering and air conditioning, uncommon at the time. When most manufacturers such as Lamborghini and DeTomaso were creating vehicles with mid-engined design, Ferrari continued to use their tried-and-true front-engined, rear wheel design.

In 1967 Ferrari dominated the Daytona 24 Hours race with a first, second, and third place finish. At the 1968 Paris Auto Show the public and press were expecting Ferrari's new berlinetta to be dubbed 'Daytona'. They were proven wrong when Ferrari dubbed the vehicle the 365 GTB/4, however, the name Daytona is a common reference to the vehicle even to this day. Ferrari had intended on using 'Daytona' but it was revealed prematurely so the traditional Ferrari naming sequence was used.

During its production lifespan lasting from 1968 through 1974, 1383 examples of the Pinifarina designed 365 GTB/4 Daytona vehicles were created.

The famous coachbuilder Pininfarina was tasked with creating many of the designs for the 365 Series. The designs were not new, rather they borrowed many of the styling cues of the prior 330 GTC and 275 GTS models. The headlights were courtesy of the 500 Superfast. The result was a visually stunning automobile with proven Ferrari mechanics and performance.

GT represented Gran Turismo. GTB represented Berlinetta or coupe. GTS stood for open models which were either a targa roof or a full convertible. '4' represented four-cam engines. 'C' represented 'Competizione' or 'Corsa' meaning 'to race'.

365 California
In 1966 Ferrari introduced the 365 California at the Geneva Auto Show as a replacement for the Ferrari 500 Superfast. The famous coachbuilder, Pininfarina, had been tasked with creating the body for the vehicle. The result was a two door, two-seat, convertible. The 365 borrowed many of the mechanics of its predecessor including the five-speed manual gearbox, chassis, and suspension. The front of vehicle was similar in design to the 500 with the remaining portions all new. With a top speed of 240 km/h, it was the fastest convertible in the world at the time. Disc brakes provided excellent stopping power for the 1300 kg vehicle. Production continued for only a year with a total of fourteen examples being created.

365 GT2+2
In 1967 Ferrari introduced the 365 GT2+2, only its second production four-seater vehicle. The vehicle would stay in production until 1971 during which around 800 examples being created.

The rear passengers had limited headroom but there was sufficient legroom for most passengers. The purpose of the vehicle was to provided performance and comfort. As a result the vehicle was outfitted with electric windows, leather interior, power assisted brakes, full carpeting, and optional air conditioning.

365 GTC
Near the close of 1968, Ferrari introduced the 365 GTC which stayed in production until 1970. During the production lifespan, 168 examples were produced. The 365 GTC was basically a 330 GTC with a SOHC 4390 cc V-12 engine. Visually, the vehicle was very similar to its predecessor except for the air vents in the front wings had been removed. In their place were black vents placed in the back corners of the hood.

365 GTS
The 365 GTS was a replacement for the 330 GTS. It featured a 4390 cc SOHC engine and had its cooling vents removed in favor of vents in the hood. Only twenty examples were created.

365 GTC/4
In 1971 Ferrari introduced the 365 GTC/4 as a replacement for the 365 GT 2+2. It sat atop a Daytona chassis and given an independent suspension. The same Daytona ventilated disc brakes were used. The gearbox was mounted in the front and the engine was the 4390 cc V12 but with six sidedraught Weber carburetors and wet sump lubrication resulting in 340 horsepower.

The design was once again handled by Pininfarina. The two-door, 2+2 coupe had pop-up headlights and five-spoke alloy wheels. During its production lifespan lasting until 1972, around 500 examples were produced. Strict American safety and emission regulations were partly responsible for the demise of the GTC/4.

365 GT4 2+2
The 365 GT4 2+2 was debuted to the public at the 1972 Paris Auto Show as a replacement for the 365 GT 2+2 and the 365 GTC/4. It sat atop an enlarged 365 GTC/4 chassis and given the same mechanics. The larger chassis meant more interior room for the passengers, especially the rear passengers, and their luggage. The styling was once again assigned to Pininfarina. The design was different from the prior 365 models.

During its production lifespan lasting until 1976, around 470 examples were created.

365 GT4 BB
The 365 GT4 BB, meaning Berlinetta Boxer, was introduced to the public at the 1971 Turin Auto Show. Its styling was similar to the P6 show car built in 1968. The engine was a flat-12 cylinder power-plant mounted longitudinal. The gearbox was mounted under the engine. This was a great design but ultimately created an unbalanced weight distribution with most of the weight over the rear axle. The weight distribution problem and the fact that the engine was mounted high in the vehicle resulted in a car that had poor handling and never achieved successful racing status.

The 365 GT4 BB was replaced by the 512 BB in 1976. The 512 BB was similar in design but featured a five-liter engine.


By Daniel Vaughan | Dec 2006

Recent Vehicle Additions

Performance and Specification Comparison

Model Year Production

#1#2#3Ferrari
1972Chevrolet (2,420,564)Ford (2,246,563)Fiat (1,368,216)850
1971Ford (2,054,351)Chevrolet (1,830,319)Volkswagen (1,128,784)850
1970Ford (2,096,184)Chevrolet (1,451,305)Volkswagen (1,193,853)850
1969Chevrolet (2,092,947)Ford (1,826,777)Volkswagen (1,241,580)
1968Chevrolet (2,139,290)Ford (1,753,334)Volkswagen (1,191,854)706
1967Chevrolet (2,206,639)Ford (1,730,224)Toyota (1,068,321)706
1966Ford (2,212,415)Chevrolet (2,206,639)Volkswagen (1,168,146)706
1965Chevrolet (2,375,118)Ford (2,170,795)Volkswagen (1,174,687)700
1964Chevrolet (2,318,619)Ford (1,594,053)Toyota (1,068,321)
1963Chevrolet (2,237,201)Ford (1,525,404)Fiat (957,941)
1962Chevrolet (2,061,677)Ford (1,476,031)Fiat (957,941)

Related Automotive News

From Russo With Love! Ferrari with 007 Pedigree to Cross the Block at Russo and Steele Monterey!

From Russo With Love! Ferrari with 007 Pedigree to Cross the Block at Russo and Steele Monterey!

1970 Ferrari 365 22 with 007 Pedigree Set to Cross the Block at Russo and Steeles 16th Annual Monterey Collector Automobile Auction Event! Scottsdale, Arizona (June 24th, 2016) – First...
Ten Hot Offerings to Watch at Russo and Steele's 15th Anniversary Auction Celebration!

Ten Hot Offerings to Watch at Russo and Steele's 15th Anniversary Auction Celebration!

Scottsdale, Arizona (August 6th, 2015) – Russo and Steele is once again presenting a spectacular selection of ultra-premium collector automobiles on Californias Monterey Peninsula for this years...
Celebrity Owned 1963 Ferrari 250GT Lusso Set to Take Center Stage at Russo and Steele Monterey 2015!

Celebrity Owned 1963 Ferrari 250GT Lusso Set to Take Center Stage at Russo and Steele Monterey 2015!

Scottsdale, Arizona (April 15, 2015) – By the early 1960s, Ferraris racing and street cars began to diverge in basic essence, with the Scuderias competition cars quickly becoming more specialized...
The Crescendo Effect: As the Days Get Closer, The Cars Get Bigger at Russo and Steele's 15th Anniversary Auction Event!

The Crescendo Effect: As the Days Get Closer, The Cars Get Bigger at Russo and Steele's 15th Anniversary Auction Event!

Scottsdale, Arizona (January 6th, 2015) – For Enthusiasts – By Enthusiasts. ™ This is far more than a tagline at Russo and Steele Collector Automobile Auctions. Its a lifestyle, and we are gearing up...
Italian Racing Classics Lead Gooding & Company's 10th Anniversary

Italian Racing Classics Lead Gooding & Company's 10th Anniversary

SANTA MONICA, Calif. (June 4, 2013) – Gooding %26 Company, the official auction house of the Pebble Beach Concours dElegance acclaimed for selling the worlds most significant and valuable collector...
© 1998-2020. All rights reserved. The material may not be published, broadcast, rewritten, or redistributed.


Vehicle information, history, and specifications from concept to production.

Follow ConceptCarz on Facebook Follow ConceptCarz on Twitter RSS News Feed

Conceptcarz.com
© 1998-2020 Conceptcarz.com Reproduction or reuse prohibited without written consent.