1984 Chevrolet Camaro Specifications

Specifications

1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992

Features

Engine Location :	Front
Drive Type :	Rear Wheel
Production Years for Series :	1982 - 1992
Price :	$8,200-$10,895
Weight :	2800 lbs \| 1270.059 kg

Engine & Transmission

Inline 4
Displacement :	2474 cc \| 151.0 cu in. \| 2.5 L.
Power :	92 HP (67.712 KW) @ 4000 RPM
Torque :	132 Ft-Lbs (179 NM) @ 2800 RPM
Bore :	4.0 in \| 102 mm.
Stroke :	3.0 in \| 76 mm.
Compression :	9.0:1
Main Bearings :	5
Construction :	Cast-iron block and head

V 6
Displacement :	2835 cc \| 173.0 cu in. \| 2.8 L.
Power :	107 HP (78.752 KW) @ 4800 RPM
Torque :	145 Ft-Lbs (197 NM) @ 2100 RPM
Bore :	3.5 in \| 89 mm.
Stroke :	3.0 in \| 76 mm.
Compression :	8.5:1
Main Bearings :	4
Construction :	Cast-iron block and head

V 6
Displacement :	2835 cc \| 173.0 cu in. \| 2.8 L.
Power :	135 BHP (99.36 KW) @ 5400 RPM
Torque :	145 Ft-Lbs (197 NM) @ 2400 RPM
Compression :	8.9:1
Valvetrain :	12 OHV (2.0 valves per cylinder)
Construction :	Cast-iron block and head

V 8 90-degree
Displacement :	4998 cc \| 305.0 cu in. \| 5.0 L.
Power :	150 BHP (110.4 KW) @ 4000 RPM
Torque :	240 Ft-Lbs (325 NM) @ 2400 RPM
Bore :	3.7 in \| 95 mm.
Stroke :	3.5 in \| 88 mm.
Compression :	8.6:1
Main Bearings :	5
Construction :	Cast-iron block and head
4-Barrel Carburetor

V 8
Displacement :	4998 cc \| 305.0 cu in. \| 5.0 L.
Power :	190 BHP (139.84 KW) @ 4600 RPM
Torque :	240 Ft-Lbs (325 NM) @ 3200 RPM
Bore :	3.7 in \| 95 mm.
Stroke :	3.5 in \| 88 mm.
Compression :	8.6:1
Main Bearings :	5
Valvetrain :	16 OHV (2.0 valves per cylinder)
Construction :	Cast-iron block and head
Rochester E4Me 4-barrel carburetor

Transmission:
4 Manual , 5 Manual , 4 Automatic

Gear Ratios

1st Gear :	3.50:1
2nd Gear :	2.48:1
3rd Gear :	1.66:1
4th Gear :	1.00:1

Production Figures

Total Chevrolet Production for 1984 :	1,655,151
Total 1984 Camaro production :	261,591
1984 Chevrolet Camaro
Berlinetta Sport Coupe 2 dr. 4 P :	33,400
Sport Coupe 2 dr. 4 P :	127,775
Z28 Sport Coupe 2 dr. 4 P :	100,416

Handling

Recall

Component	EQUIPMENT
Manufacturer	HONEYWELL INTERNATIONAL, INC.
NHTSA Campaign ID	07E088000
Summary	CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
Consequence	THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
Remedy	HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
Notes	CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component	FUEL SYSTEM, GASOLINE
Manufacturer	HONEYWELL INTERNATIONAL, INC.
NHTSA Campaign ID	06E043000
Summary	CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON 'DOCUMENT SEARCH' AND THEN 'BUS APPLICATIONS'). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
Consequence	THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.
Remedy	HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).
Notes	THIS RECALL ONLY PERTAINS TO AFTERMARKET FRAM FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE VEHICLES LISTED.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component	PARKING BRAKE:CONVENTIONAL
Manufacturer	GENERAL MOTORS CORP.
Mfr Report Date	19810301
NHTSA Campaign ID	91V055000
Summary	PARKING BRAKE ADJUSTER FAILS TO OPERATE AND DO NOT WORK AFTER BRAKE PAD WEAR.
Consequence	PARKING BRAKES WILL NOT COMPLETELY HOLD A PARKED VEHICLEWHEN PARKED ON A SLOPE, CAUSING UNINTENDED VEHICLE ROLLAWAY WHICH COULD RESULTIN A VEHICLE ACCIDENT.
Remedy	REPLACE NONFUNCTIONING PARKING BRAKE ADJUSTERS.
Notes	SYSTEM: PARKING BRAKE.VEHICLE DESCRIPTION: PASSENGER CARS; FIREBIRDS AND CAMAROS WITH MANUALTRANSMISSIONS AND REAR DISK BRAKES AND FIEROS WITH MANUAL TRANSMISSIONS.

Component	SEAT BELTS:FRONT:WEBBING
Manufacturer	GENERAL MOTORS CORP.
Mfr Report Date	19821001
NHTSA Campaign ID	85V169000
Summary	DISLOCATION OF A SPRING COVER WILL NOT ALLOW THE SHOULDER BELT TO RETRACT AFTER BEING EXTENDED. CONSEQUENCE OF DEFECT: ALTHOUGH INERTIAL FEATURE THAT LOCKS THE LAP BELT AND SHOULDER BELT IN THE EVENT OF AN ACCIDENT ARE NOT AFFECTED, IF SLACK IS MORE THAN RECOMMENDED IN OWNERS MANUAL, INJURIES TO UPPER BODY AND HEAD WOULD BE INCREASED IN AN ACCIDENT.
Remedy	INSTALL RETAINING SPRINGS ON SPRING COVER OF FRONT SHOULDER BELT RETRACTOR AND, WHEN REQUIRED, RETRACTORS WILL BE REPLACED.
Notes	SYSTEM: SHOULDER SEAT BELT RETRACTOR. VEHICLE DESCRIPTION: PASSENGER CARS.

Component	SEATS:FRONT ASSEMBLY:RECLINER
Manufacturer	GENERAL MOTORS CORP.
Mfr Report Date	19830701
NHTSA Campaign ID	84V011000
Summary	SOME VEHICLES HAVE BUCKET SEAT BACK LOCKS THAT DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD 207, ANCHORAGE OF SEATS. IN EVENT OF A CRASH, THE SEAT BACK LOCK MAY NOT FUNCTION.
Remedy	INSPECTION OF SEAT BACK LOCKS WILL BE PERFORMED. LOCKS THAT HAVE BENT, BROKEN OR MISSING HOOKS WILL BE REPLACED.
Notes	VEHICLE DESCRIPTION: TWO DOOR PASSENGER VEHICLES AND LIGHT TRUCKS EQUIPPED WITHAR9 OR AV5 BUCKET SEATS.SYSTEM: INTERIOR SYSTEMS, SEAT BACK LOCKS.CONSEQUENCES OF DEFECT: THE SEAT MAY FOLD FORWARD IN A CRASH, AND WOULDINCREASE THE LIKELIHOOD OF INJURY TO THE SEAT OCCUPANT.

Component	SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer	GENERAL MOTORS CORP.
Mfr Report Date	19830901
NHTSA Campaign ID	90V105000
Summary	PLASTIC COMPONENTS OF SEAT BELT BUCKLE ASSEMBLIES DO NOT CONTAIN AN ULTRA VIOLET STABILIZER, AND EXPOSURE TO DIRECT SUNLIGHT AND ELEVATED INTERIOR TEMPERATURES COULD WEAKEN THE PLASTIC COMPONENTS.
Consequence	THIS COULD RESULT IN BREAKAGE OF PLASTIC COMPONENTS WHICHCOULD PREVENT BUCKLE FROM LATCHING AND PROTECTING OCCUPANT IN A SUDDEN STOP ORACCIDENT.
Remedy	REPLACE OR REPAIR SEAT BELT BUCKLE.
Notes	SYSTEM: SEAT BELT BUCKLE.VEHICLE DESCRIPTION: PASSENGER CARS.

Component	SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Manufacturer	GENERAL MOTORS CORP.
Mfr Report Date	19840101
NHTSA Campaign ID	84V093000
Summary	REAR BRAKE HOSES WERE NOT PROPERLY MANUFACTURED AND DO NOT CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 106, 'BRAKE HOSES'. HOSES COULD COME LOOSE FROM THE END FITTINGS WHEN SUBJECTED TO A PULLING FORCE.
Remedy	A NEW HOSE WILL BE INSTALLED IF NECESSARY. IN ADDITION, BRAKES WILL BE SERVICED.
Notes	VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: SERVICE BRAKES; REAR BRAKE HOSE.CONSEQUENCES OF DEFECT: SEPARATION OF THE HOSE FROM ITS METAL END FITTING WOULDRESULT IN LOSS OF BRAKE FLUID AND LOSS OF SOME BRAKE ACTION. AN ACCIDENT COULDRESULT UNDER CIRCUMSTANCES REQUIRING MINIMUM STOPPING DISTANCE.

Information provided by NHTSA
Data updated June 2024

1984 Averages

Avg. Household Income :	$21,600
Avg. Home :	$86,730
Avg. Gallon of Gas :	$1.10

1984 Chevrolet Camaro FAQs (show)

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1984 Chevrolet Camaro?
How many 1984 Chevrolet Camaro were produced?
How powerful was the 1984 Chevrolet Camaro? Was the 1984 Chevrolet Camaro popular? Was the 1984 Chevrolet Camaro expensive? What was the fuel economy of the 1984 Chevrolet Camaro?

Q: What is the wheelbase size of the 1984 Chevrolet Camaro? A: The 1984 Chevrolet Camaro has a wheelbase size of 101.00 inches.

Q: What is the length of the 1984 Chevrolet Camaro? A: The 1984 Chevrolet Camaro has a length of 187.80 inches.

Q: What is the width of the 1984 Chevrolet Camaro? A: The 1984 Chevrolet Camaro has a width of 72.80 inches.

Q: How much did the 1984 Chevrolet Camaro cost when new?A: The 1984 Chevrolet Camaro cost approximately $8,200 to $10,895 (USD) when new.

Q: What were the bodystyles of the 1984 Chevrolet Camaro? A: The 1984 Chevrolet Camaro was offered as a Berlinetta Sport Coupe, Sport Coupe, Z28 Sport Coupe.

Q: How many vehicles did Chevrolet produce in 1984? A: Chevrolet produced 1,655,151 automobiles in 1984.

Q: How many 1984 Camaros were produced? A: Chevrolet produced 261,591 examples of the Camaro in 1984.

Q: What engines did the 1984 Chevrolet Camaro have? A: The 1984 Chevrolet Camaro had the following engine options: Inline 4 (2474 cc | 151.0 cu in. | 2.5 L.) with 92 HP (67.712 KW) @ 4000 RPM and 132 Ft-Lbs (179 NM) @ 2800 RPM

V 6 (2835 cc | 173.0 cu in. | 2.8 L.) with 107 HP (78.752 KW) @ 4800 RPM and 145 Ft-Lbs (197 NM) @ 2100 RPM

V 6 (2835 cc | 173.0 cu in. | 2.8 L.) with 135 BHP (99.36 KW) @ 5400 RPM and 145 Ft-Lbs (197 NM) @ 2400 RPM

V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 150 BHP (110.4 KW) @ 4000 RPM and 240 Ft-Lbs (325 NM) @ 2400 RPM

V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 190 BHP (139.84 KW) @ 4600 RPM and 240 Ft-Lbs (325 NM) @ 3200 RPM

Q: What transmissions did the 1984 Chevrolet Camaro have? A: The 1984 Chevrolet Camaro had the following gearbox options: 4 speed Manual, 5 speed Manual, 4 speed Automatic.