1997 Buick Regal Navigation
Features
Engine Location : | Front |
Drive Type : | Front Wheel |
Body / Chassis : | Integral |
Production Years for Series : | 1997 - 2004 |
Price : | $19,740-$21,800 |
Weight : | 3330 lbs | 1510.463 kg |
Engine & Transmission
V 6 60-degree | |
---|---|
Displacement : | 3130 cc | 191.0 cu in. | 3.1 L. |
Power : | 160 HP (117.76 KW) @ 5200 RPM |
Torque : | 185 Ft-Lbs (251 NM) @ 4000 RPM |
Bore : | 3.5 in | 89 mm. |
Stroke : | 3.3 in | 84 mm. |
Compression : | 9.6:1 |
Cylinder Block : | Cast-iron |
Cylinder Head : | Aluminum |
Sequential Port Fuel Injection |
V 6 90-degree | Series II | |
---|---|
Displacement : | 3785 cc | 231.0 cu in. | 3.8 L. |
Power : | 205 HP (150.88 KW) @ 5200 RPM |
Torque : | 230 Ft-Lbs (312 NM) @ 4000 RPM |
Bore : | 3.8 in | 97 mm. |
Stroke : | 3.4 in | 86 mm. |
Compression : | 9.4:1 |
Construction : | Cast-iron block and head |
Sequential Port Fuel Injection |
4 Automatic 4T60-E electronically controlled
Production Figures
Total Buick Production for 1997 : | 287,655 |
Total 1997 Regal production : | 29,239 |
1997 Buick Regal |
Handling
Recall
Component | STEERING:RACK AND PINION |
---|---|
Manufacturer | GENERAL MOTORS CORP. |
Mfr Report Date | 19960801 |
NHTSA Campaign ID | 03V527000 |
Summary | CERTAIN PASSENGER VEHICLES HAVE LOWER PINION BEARINGS IN THE POWER RACK AND PINION ASSEMBLY IN WHICH THE RETAINER TABS WERE NOT CRIMPED PROPERLY. THESE RETAINERS COULD FAIL AND PERMIT THE BALL BEARINGS TO ESCAPE. |
Consequence | IF THIS OCCURS, THE PINION SHAFT CAN BE FORCED UPWARD DURING LEFT TURNS AND BACK DOWN AS THE STEERING WHEEL IS MOVED BACK AND TO THE RIGHT. IF THE PINION SHAFT MOVES FURTHER, THE DRIVER WILL NEED TO EXERT MORE EFFORT TO TURN THE STEERING WHEEL, SIMILAR TO A VEHICLE WITHOUT POWER ASSISTED STEERING. IF THE PINION SHAFT MOVES EVEN FURTHER, THE DRIVER WILL REQUIRE MUCH HIGHER EFFORT TO TURN LEFT AND MAY NOT BE ABLE TO TURN THE WHEEL AS MUCH AS INTENDED. WITH THE MAXIMUM PINION SHAFT MOVEMENT, WHICH REQUIRES INTERNAL GEAR COMPONENT DAMAGE, THE DRIVER CAN ENCOUNTER HIGH RESISTANCE TO TURNING LEFT, FOLLOWED BY UNINTENDED POWER ASSIST TO THE RIGHT. IN ANY OF THESE CONDITIONS, A CRASH COULD OCCUR. |
Remedy | DEALERS WILL INSTALL A NEW LOWER PINION BEARING UNLESS INSPECT OF THE EXISTING BEARING INDICATES THAT REPLACEMENT OF THE GEAR ASSEMBLY IS NECESSARY. OWNER NOTIFICATION BEGAN ON FEBRUARY 5, 2004. OWNERS SHOULD CONTACT BUICK AT 1-866-608-8080; CHEVROLET AT 1-800-630-2438; OLDSMOBILE AT 1-800-630-6537; OR PONTIAC AT 1-800-620-7668. |
Notes | GM RECALL NO. 03062.CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
---|---|
Manufacturer | GENERAL MOTORS CORP. |
Mfr Report Date | 19960801 |
NHTSA Campaign ID | 97V223000 |
Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE RIGHT FRONT BRAKE PIPE CAN CONTACT THE PIOWER STEERING ASSEMBLY CAUSING THE BRAKE LINE TO WEAR THROUGH. |
Consequence | THIS CONDITION CAN RESULT IN THE LOSS OF BRAKE FLUID AND EVENTUAL LOSS OF HALF OF THE VEHICLE BRAKE SYSTEM. |
Remedy | DEALERS WILL INSPECT FOR PROPER CLEARANCE BETWEEN THE BRAKE LINE AND POWER STEERING ASSEMBLY. ASSEMBLIES FOUND TO BE OUT OF POSITION WILL BE REPOSITIONED AND ALL ASSEMBLIES SECURED TO MAINTAIN PROPER CLEARANCES. ADDITIONALLY, THOSE BRAKE LINES FOUND TO HAVE BEEN DAMAGED WILL BE REPLACED AND PROPERLY ROUTED. |
Notes | OWNER NOTIFICATION BEGAN DURING NOVEMBER 1997. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BUICK AT 1-800-521-7300.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
Component | EXTERIOR LIGHTING:HEADLIGHTS |
---|---|
Manufacturer | GENERAL MOTORS CORP. |
Mfr Report Date | 19960801 |
NHTSA Campaign ID | 98V102000 |
Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE OWNER MANUALS DO NOT CONTAIN THE REQUIREMENT INFORMATION PERTAINING TO THE VEHICLE HEADLAMP AIMING DEVICE. THIS DOES NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 108, 'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.' |
Consequence | IF THE HEADLAMP ASSEMBLIES ARE REPLACED, CUSTOMERS MAY NOT BE ABLE TO PROPERLY AIM THE HEADLIGHTS. |
Remedy | OWNERS WILL BE MAILED AN OWNER MANUAL'S INSERT WHICH CONTAINS THE APPROPRIATE INFORMATION. |
Notes | OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING JUNE 1998.OWNERS WHO DO NOT RECEIVE THE INSERT AND INSTALLATION INSTRUCTIONS WITHIN A REASONABLE TIME SHOULD CONTACT BUICK AT 1-800-521-7300 OR OLDSMOBILE AT 1-800-442-6537.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Component | VISIBILITY:WINDSHIELD WIPER/WASHER:LINKAGES |
---|---|
Manufacturer | GENERAL MOTORS CORP. |
Mfr Report Date | 19960801 |
NHTSA Campaign ID | 99V348000 |
Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE WINDSHIELD WIPERS MAY STOP WORKING DUE TO A SEPARATION BETWEEN THE DRIVE PIN AND CRESCENT IN THE CRANK ARM ASSEMBLY. |
Consequence | DRIVER VISIBILITY COULD BE REDUCED, INCREASING THE RISK OF A CRASH. |
Remedy | DEALERS WILL INSPECT THESE VEHICLES FOR THE PRESENCE OF A PLASTIC WATER DEFLECTOR AND, IF NECESSARY, REPLACE THE WIPER MOTOR CRANK ARM AND INSTALL A WATER DEFLECTOR. ON VEHICLES RECEIVING A REPLACEMENT CRANK ARM AND NEW WATER DEFLECTOR, DEALERS WILL ALSO APPLY ADDITIONAL SEALING MATERIAL TO IMPROVE WATER DEFLECTION AWAY FROM THE CRANK ARM ASSEMBLY AND WILL INSTALL A REINFORCEMENT TO IMPROVE THE PERFORMANCE OF THE WIPER PARK MECHANISM. |
Notes | GM RECALL NO. 99091.OWNER NOTIFICATION BEGAN MAY 25, 2000.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT PONTIAC AT 1-800-762-2737 OR BUICK AT 1-800-521-7300.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Component | ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE |
---|---|
Manufacturer | General Motors LLC |
Mfr Report Date | 19960904 |
NHTSA Campaign ID | 15V701000 |
Summary | General Motors LLC (GM) is recalling certain model year 1998-1999 Chevrolet Lumina and Oldsmobile Intrigue, 1997-2004 Buick Regal and Pontiac Grand Prix, 2000-2004 Chevrolet Impala, and 1998-2004 Chevrolet Monte Carlo vehicles. The affected vehicles were previously repaired under recalls 08V-118, 09V-116, and 15V-201 to address the possibility that engine oil may drip onto the hot exhaust manifold. |
Consequence | Engine oil that drips onto the hot surface of the exhaust manifold may result in a fire. |
Remedy | The remedy applied under recalls 08V-118, 09V-116, and 15V-201 did not adequately remove the safety risk. Under the improved remedy, dealers will replace the engine?s front valve cover and gasket. Vehicles that are covered by recalls 08V-118, 09V-116, or 15V-201 that have not yet received the original remedy will instead receive the improved remedy under the original recall number. The recall began on February 19, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020, Buick customer service at 1-800-521-7300, Oldsmobile customer service at 1-800-442-6537 and Pontiac customer service at 1-800-458-8006. GM's number for this recall is 15757. Note: Until the improved remedy has been applied, owners are advised to park their vehicle outside since the fire risk exists even when the vehicle is unattended. |
Notes | Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
Data updated June 2024
1997 Averages
Avg. Car Cost : | $16,900 |
Avg. Household Income : | $37,005 |
Avg. Home : | $124,100 |
Avg. Gallon of Gas : | $1.22 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1997 Buick Regal?
Q: What is the wheelbase size of the 1997 Buick Regal? A: The 1997 Buick Regal has a wheelbase size of 107.50 inches.Q: What is the length of the 1997 Buick Regal? A: The 1997 Buick Regal has a length of 194.10 inches.Q: What is the width of the 1997 Buick Regal? A: The 1997 Buick Regal has a width of 72.90 inches.Q: How much did the 1997 Buick Regal cost when new?A: The 1997 Buick Regal cost approximately $19,740 to $21,800 (USD) when new.Q: What were the bodystyles of the 1997 Buick Regal? A: The 1997 Buick Regal was offered as a Custom Sedan, Gran Sport Sedan, Limited Sedan.Q: How many vehicles did Buick produce in 1997? A: Buick produced 287,655 automobiles in 1997.Q: How many 1997 Regals were produced? A: Buick produced 29,239 examples of the Regal in 1997.Q: What engines did the 1997 Buick Regal have? A: The 1997 Buick Regal had the following engine options: V 6 (3130 cc | 191.0 cu in. | 3.1 L.) with 160 HP (117.76 KW) @ 5200 RPM and 185 Ft-Lbs (251 NM) @ 4000 RPM V 6 (3785 cc | 231.0 cu in. | 3.8 L.) with 205 HP (150.88 KW) @ 5200 RPM and 230 Ft-Lbs (312 NM) @ 4000 RPM Q: What transmission did the 1997 Buick Regal have? A: The 1997 Buick Regal had a 4 speed Automatic 4T60-E electronically controlled gearbox.
What are the dimension and mechanical specifications of the 1997 Buick Regal?
How many 1997 Buick Regal were produced?
How powerful was the 1997 Buick Regal? Was the 1997 Buick Regal popular? Was the 1997 Buick Regal expensive? What was the fuel economy of the 1997 Buick Regal?
Q: What is the wheelbase size of the 1997 Buick Regal? A: The 1997 Buick Regal has a wheelbase size of 107.50 inches.Q: What is the length of the 1997 Buick Regal? A: The 1997 Buick Regal has a length of 194.10 inches.Q: What is the width of the 1997 Buick Regal? A: The 1997 Buick Regal has a width of 72.90 inches.Q: How much did the 1997 Buick Regal cost when new?A: The 1997 Buick Regal cost approximately $19,740 to $21,800 (USD) when new.Q: What were the bodystyles of the 1997 Buick Regal? A: The 1997 Buick Regal was offered as a Custom Sedan, Gran Sport Sedan, Limited Sedan.Q: How many vehicles did Buick produce in 1997? A: Buick produced 287,655 automobiles in 1997.Q: How many 1997 Regals were produced? A: Buick produced 29,239 examples of the Regal in 1997.Q: What engines did the 1997 Buick Regal have? A: The 1997 Buick Regal had the following engine options: V 6 (3130 cc | 191.0 cu in. | 3.1 L.) with 160 HP (117.76 KW) @ 5200 RPM and 185 Ft-Lbs (251 NM) @ 4000 RPM- 1997 Buick Regal Menu
- Article
- Image gallery
- Valuation
- Specifications
- Recalls