1984 Lincoln Mark VII Specifications
1984 Lincoln Mark VII Navigation
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Production Years for Series : | 1983 - 1992 |
| Price : | $22,400-$24,800 |
Engine & Transmission
| V 8 90-degree | |
|---|---|
| Displacement : | 4949 cc | 302.0 cu in. | 5.0 L. |
| Power : | 140 HP (103.04 KW) @ 3200 RPM |
| Torque : | 250 Ft-Lbs (339 NM) @ 1600 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.0 in | 76 mm. |
| Compression : | 8.4:1 |
| Main Bearings : | 5 |
| Construction : | Cast-iron block and head |
| Throttle-Body Electronic Fuel Injection | |
| TurboDiesel Inline 6 | |
|---|---|
| Displacement : | 2442 cc | 149.0 cu in. | 2.4 L. |
| Power : | 115 HP (84.64 KW) @ 4800 RPM |
| Torque : | 155 Ft-Lbs (210 NM) @ 2400 RPM |
| Bore : | 3.2 in | 80 mm. |
| Stroke : | 3.2 in | 81 mm. |
| Compression : | 23.0:1 |
| Main Bearings : | 4 |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Aluminum |
| Fuel Injected | |
4 Automatic Overdrive
Gear Ratios
| 1st Gear : | 2.40:1 |
| 2nd Gear : | 1.47:1 |
| 3rd Gear : | 1.00:1 |
| 4th Gear : | 0.67:1 |
Production Figures
| Total Lincoln Production for 1984 : | 157,434 |
| Continental Mark VII Production (1983-1992) : | 190,832 |
| Total 1984 Mark VII production : | 33,344 |
| 1984 Lincoln Mark VII | |
Dimension(s)
Coupe
| Fuel Capacity : | 22.3 Gal |
| Seating Capacity : | 5 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 202.8 in | 5151 mm. |
| Width : | 70.9 in | 1801 mm. |
| Height : | 54.2 in | 1377 mm. |
| Wheelbase : | 108.5 in | 2756 mm. |
| Front Track : | 58.4 in | 1483 mm. |
| Rear Track : | 59.0 in | 1499 mm. |
LSC Coupe
| Price : | $23,700 |
| Fuel Capacity : | 22.3 Gal |
| Seating Capacity : | 5 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 202.8 in | 5151 mm. |
| Width : | 70.9 in | 1801 mm. |
| Height : | 54.2 in | 1377 mm. |
| Wheelbase : | 108.5 in | 2756 mm. |
| Front Track : | 58.4 in | 1483 mm. |
| Rear Track : | 59.0 in | 1499 mm. |
Versace Designer Series Coupe
| Price : | $24,400 |
| Fuel Capacity : | 22.3 Gal |
| Seating Capacity : | 5 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 202.8 in | 5151 mm. |
| Width : | 70.9 in | 1801 mm. |
| Height : | 54.2 in | 1377 mm. |
| Wheelbase : | 108.5 in | 2756 mm. |
| Front Track : | 58.4 in | 1483 mm. |
| Rear Track : | 59.0 in | 1499 mm. |
Bill Blass Designer Series Coupe
| Price : | $24,800 |
| Fuel Capacity : | 22.3 Gal |
| Seating Capacity : | 5 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 202.8 in | 5151 mm. |
| Width : | 70.9 in | 1801 mm. |
| Height : | 54.2 in | 1377 mm. |
| Wheelbase : | 108.5 in | 2756 mm. |
| Front Track : | 58.4 in | 1483 mm. |
| Rear Track : | 59.0 in | 1499 mm. |
Handling
| Suspension | |
|---|---|
| Front : Modified MacPherson strut with anti-sway bar, ectronically-controlled auto-leveling air springs and gas-pressurized shocks. Rear : Rigid axle with four links and anti-sway bar, electronically-controlled auto-leveling air springs and gas-pressurized shocks. | |
| Steering | |
|---|---|
| Rack and Pinion with Power Assist |
| Tires / Wheels | |
|---|---|
| Tires : | P215/70R15 SBR WSW |
Recall
| Component | SEAT BELTS:FRONT:ANCHORAGE |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| Mfr Report Date | 19830801 |
| NHTSA Campaign ID | 83V134000 |
| Summary | THE BOLTS THAT ATTACH THE D-SHAPED RING FOR THE SHOULDER BELT ARE INADEQUATELY SUPPORTED BY THE MATERIAL IN WHICH THEY ARE MOUNTED. THE ATTACHMENT DOES NOT COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, 'SEAT BELT ASSEMBLY ANCHORAGES'. |
| Remedy | DEALERS WILL INSTALL NEW ATTACHING HARDWARE TO IMPROVE THE STRENGTH OF THE MOUNTING. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES AND LIGHT TRUCKS.SYSTEM: INTERIOR SYSTEMS; SEAT BELTS AND UPPER TORSO RESTRAINT ATTACHMENTS.CONSEQUENCES OF DEFECT: IN SEVERE COLLISIONS, THE SHOULDER BELT ATTACHMENTCOULD SEPARATE, INCREASING THE POSSIBILITY OF OCCUPANT INJURY.NOTE: MANUFACTURER ADVISES THAT SEAT BELTS SHOULD CONTINUE TO BE USED AT ALLTIMES, AS SUBSTANTIAL BENEFITS MAY STILL BE OBTAINED. |
| Component | STEERING:COLUMN LOCKING:ANTI-THEFT DEVICE |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| Mfr Report Date | 19830801 |
| NHTSA Campaign ID | 84V003000 |
| Summary | THE STEERING WHEEL MAY BE LOCKED WHEN THE IGNITION KEY IS IN THE OFF POSITION AND THE GEAR SHIFT LEVER IS NOT IN PARK. THIS CONDITION CONSTITUTES A NON COMPLIANCE WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, THEFT PROTECTION. |
| Remedy | KEY RELEASE CONTROL CABLE WILL BE INSPECTED AND MODIFIED IF NECESSARY. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: STEERING; IGNITION LOCK.CONSEQUENCES OF DEFECT: THE DESIGN IS INTENDED TO PREVENT THE KEY FROM BEINGREMOVED WHEN IT IS IN ANY POSITION EXCEPT LOCK. THE DEFECT MAY CAUSE THESTEERING WHEEL TO LOCK WHILE THE VEHICLE IS STILL IN MOTION, POSSIBLY RESULTINGIN LOSS OF CONTROL AND AN ACCIDENT. |
| Component | UNKNOWN OR OTHER |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| Mfr Report Date | 19830801 |
| NHTSA Campaign ID | 84V004000 |
| Summary | LABELS SPECIFYING VEHICLE CAPACITY WEIGHT AND DESIGNATED SEATING CAPACITY OVERSTATE THE MAXIMUM LOAD PERMISSIBLE FOR BOTH OCCUPANTS AND LUGGAGE. THE LABEL IS IN NON COMPLIANCE WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, TIRE SELECTION AND RIMS. |
| Remedy | THE INCORRECT LABEL WILL BE REPLACED. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: LABELS, INFORMATION AND CERTIFICATION.CONSEQUENCES OF DEFECT: THE INCORRECT INFORMATION COULD MISLEAD THE CONSUMERAND RESULT IN AN OVERLOADED VEHICLE. PREMATURE TIRE FAILURE, OR HANDLINGPROBLEMS COULD RESULT IN LOSS OF VEHICLE CONTROL AND AN ACCIDENT. |
Data updated June 2024
1984 Averages
| Avg. Household Income : | $21,600 |
| Avg. Home : | $86,730 |
| Avg. Gallon of Gas : | $1.10 |
1984 Lincoln Mark VII FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1984 Lincoln Mark VII?
Q: What is the wheelbase size of the 1984 Lincoln Mark VII? A: The 1984 Lincoln Mark VII has a wheelbase size of 108.50 inches.Q: What is the length of the 1984 Lincoln Mark VII? A: The 1984 Lincoln Mark VII has a length of 202.80 inches.Q: What is the width of the 1984 Lincoln Mark VII? A: The 1984 Lincoln Mark VII has a width of 70.90 inches.Q: How much did the 1984 Lincoln Mark VII cost when new?A: The 1984 Lincoln Mark VII cost approximately $22,400 to $24,800 (USD) when new.Q: What were the bodystyles of the 1984 Lincoln Mark VII? A: The 1984 Lincoln Mark VII was offered as a Bill Blass Designer Series Coupe, Coupe, LSC Coupe, Versace Designer Series Coupe.Q: What tires did the 1984 Lincoln Mark VII have? A: The 1984 Lincoln Mark VII had P215/70R15 SBR WSW tires.Q: How many vehicles did Lincoln produce in 1984? A: Lincoln produced 157,434 automobiles in 1984.Q: How many Continental Mark VII were produced? A: Lincoln produced 190,832 examples of the Continental Mark VII from 1983 to 1992.Q: How many 1984 Mark VIIs were produced? A: Lincoln produced 33,344 examples of the Mark VII in 1984.Q: What engines did the 1984 Lincoln Mark VII have? A: The 1984 Lincoln Mark VII had the following engine options: V 8 (4949 cc | 302.0 cu in. | 5.0 L.) with 140 HP (103.04 KW) @ 3200 RPM and 250 Ft-Lbs (339 NM) @ 1600 RPM TurboDiesel Inline 6 (2442 cc | 149.0 cu in. | 2.4 L.) with 115 HP (84.64 KW) @ 4800 RPM and 155 Ft-Lbs (210 NM) @ 2400 RPM Q: What transmission did the 1984 Lincoln Mark VII have? A: The 1984 Lincoln Mark VII had a 4 speed Automatic Overdrive gearbox.
What are the dimension and mechanical specifications of the 1984 Lincoln Mark VII?
How many 1984 Lincoln Mark VII were produced?
How powerful was the 1984 Lincoln Mark VII? Was the 1984 Lincoln Mark VII popular? Was the 1984 Lincoln Mark VII expensive? What was the fuel economy of the 1984 Lincoln Mark VII?
Q: What is the wheelbase size of the 1984 Lincoln Mark VII? A: The 1984 Lincoln Mark VII has a wheelbase size of 108.50 inches.Q: What is the length of the 1984 Lincoln Mark VII? A: The 1984 Lincoln Mark VII has a length of 202.80 inches.Q: What is the width of the 1984 Lincoln Mark VII? A: The 1984 Lincoln Mark VII has a width of 70.90 inches.Q: How much did the 1984 Lincoln Mark VII cost when new?A: The 1984 Lincoln Mark VII cost approximately $22,400 to $24,800 (USD) when new.Q: What were the bodystyles of the 1984 Lincoln Mark VII? A: The 1984 Lincoln Mark VII was offered as a Bill Blass Designer Series Coupe, Coupe, LSC Coupe, Versace Designer Series Coupe.Q: What tires did the 1984 Lincoln Mark VII have? A: The 1984 Lincoln Mark VII had P215/70R15 SBR WSW tires.Q: How many vehicles did Lincoln produce in 1984? A: Lincoln produced 157,434 automobiles in 1984.Q: How many Continental Mark VII were produced? A: Lincoln produced 190,832 examples of the Continental Mark VII from 1983 to 1992.Q: How many 1984 Mark VIIs were produced? A: Lincoln produced 33,344 examples of the Mark VII in 1984.Q: What engines did the 1984 Lincoln Mark VII have? A: The 1984 Lincoln Mark VII had the following engine options: V 8 (4949 cc | 302.0 cu in. | 5.0 L.) with 140 HP (103.04 KW) @ 3200 RPM and 250 Ft-Lbs (339 NM) @ 1600 RPM- 1984 Lincoln Mark VII Menu
- Article
- Image gallery
- Valuation
- Specifications
- Profiles
- Recalls
