These are standard specifications for the 1995 Ferrari F355, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
6 Manual
Chassis # 102591
Chassis # 100271
Chassis # ZFFPR41A2S0104321
View info And history
Auction entries : 1
Chassis # ZFFPR41A6S0100630
View info And history
Auction entries : 1
Chassis # ZFFPR48A1S0103084
View info And history
Auction entries : 1
Chassis # ZFFPR48A3S0104074
View info And history
Auction entries : 2
Chassis # 100433
Information provided by NHTSA
Data updated January 2023
Features
Engine Location : | Mid |
Drive Type : | Rear Wheel |
Production Years for Series : | 1995 - 1999 |
Price : | $127,180-$137,080 |
Weight : | 2980 lbs | 1351.705 kg |
Chassis Range : | 98363 - 115902 |
Performance
0-60 mph : | 4.7 seconds. |
1/4 Mile : | 12.9 seconds. |
Top Speed : | 158 mph | 254.222 km/h |
Engine & Transmission
V 8 | Vee-Type | |
---|---|
Displacement : | 3500 cc | 213.6 cu in. | 3.5 L. |
Power : | 375 BHP (276 KW) @ 8250 RPM |
Torque : | 268 Ft-Lbs (363 NM) @ 6000 RPM |
Bore : | 3.4 in | 85 mm. |
Stroke : | 3.0 in | 77 mm. |
Compression : | 11.0:1 |
Valvetrain : | 32 DOHC (4 valves per cylinder) |
Bosch Motronic 5.2 fuel injection |
6 Manual
Production Figures
Total Ferrari Production for 1995 : | 700 |
F355 Production (1995-1999) : | 11,273 |
: | 4871 Berlinetta; 3717 Spider; 104 Serie Fiorano |
1995 Ferrari F355 |
Dimension(s)
Berlinetta
Chassis # 102591
Chassis # 100271
Chassis # ZFFPR41A2S0104321
View info And history
Auction entries : 1
Chassis # ZFFPR41A6S0100630
View info And history
Auction entries : 1
Seating Capacity : | 2 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 167.3 in | 4249 mm. |
Width : | 74.8 in | 1900 mm. |
Height : | 46.1 in | 1171 mm. |
Wheelbase : | 96.5 in | 2451 mm. |
Front Track : | 59.6 in | 1514 mm. |
Rear Track : | 63.6 in | 1615 mm. |
Targa
Price : | $133,730 |
Weight : | 2980 lbs | 1351.705 kg |
Seating Capacity : | 2 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 167.3 in | 4249 mm. |
Width : | 74.8 in | 1900 mm. |
Height : | 46.1 in | 1171 mm. |
Wheelbase : | 96.5 in | 2451 mm. |
Front Track : | 59.6 in | 1514 mm. |
Rear Track : | 63.6 in | 1615 mm. |
Cabriolet
Chassis # ZFFPR48A1S0103084
View info And history
Auction entries : 1
Chassis # ZFFPR48A3S0104074
View info And history
Auction entries : 2
Price : | $137,080 |
Weight : | 2970 lbs | 1347.169 kg |
Seating Capacity : | 2 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 167.3 in | 4249 mm. |
Width : | 74.8 in | 1900 mm. |
Height : | 46.1 in | 1171 mm. |
Wheelbase : | 96.5 in | 2451 mm. |
Front Track : | 59.6 in | 1514 mm. |
Rear Track : | 63.6 in | 1615 mm. |
Challenge Berlinetta
Chassis # 100433
Seating Capacity : | 2 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 167.3 in | 4249 mm. |
Width : | 74.8 in | 1900 mm. |
Height : | 46.1 in | 1171 mm. |
Wheelbase : | 96.5 in | 2451 mm. |
Front Track : | 59.6 in | 1514 mm. |
Rear Track : | 63.6 in | 1615 mm. |
Handling
Suspension | |
---|---|
Front : Independent, double unequal-length wishbones, coil springs, pressurized gas dampers, electronic damping (2 settings), anti-roll bar Rear : Independent, double unequal-length wishbones, coil springs, pressurized gas dampers, electronic damping (2 settings), anti-roll bar |
Steering | |
---|---|
Rack and Pinion with Power Assist |
Tires / Wheels | |
---|---|
Tires : | Front : 225/40 ZR 18 Rear : 265/40 ZR 18 |
Recall
Component | FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS |
---|---|
Manufacturer | FERRARI NORTH AMERICA |
Mfr Report Date | 19940701 |
NHTSA Campaign ID | 97V163000 |
Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH DUAL FUEL PUMPS. THE FUEL SUPPLY LINE FITTING CAN FRACTURE IF THE ALUMINUM ***** ATTTACHING THE LINES IS TIGHTENED EXCESSIVELY. HAIRLINE CRACKS ON THE FUEL INJECTOR RAIL ALSO EXISTS. |
Consequence | THIS CONDITION CAN RESULT IN LEAKAGE OF FUEL FROM THE FRACTURED LINE. IF AN IGNITION SOURCE WAS PRESENT, A FIRE COULD OCCUR. |
Remedy | DEALERS WILL REMOVE THE FUEL FUEL INJECTION LINES AND TWO RAILS THAT US ALUMINUM NUTS AND REPLACE THE LINES AND RAILS WITH STEEL NUTS. |
Notes | OWNER NOTIFICATION BEGAN DURING SEPTEMBER 1997. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FERRARI AT 1-201-816-2651.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
Component | FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS |
---|---|
Manufacturer | FERRARI NORTH AMERICA |
Mfr Report Date | 19940701 |
NHTSA Campaign ID | 98V088000 |
Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES FITTED WITH DUAL FUEL PUMPS. THE FUEL INJECTION LINE FITTING CAN FRACTURE IF THE ALUMINUM ***** ATTACHING THE LINES IS TIGHTENED EXCESSIVELY. |
Consequence | IF THE FUEL LINE FRACTURES, FUEL LEAKAGE CAN OCCUR. IF AN IGNITION SOURCE IS PRESENT, A FIRE COULD OCCUR. |
Remedy | DEALERS WILL REMOVE THE FUEL INJECTION LINES THAT HAVE ALUMINUM NUTS AND REPLACE WITH NEW LINES CONTAINING STEEL ATTACHING NUTS. |
Notes | OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING MAY 1998.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FERRARI AT 1-201-816-2651.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Component | FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS |
---|---|
Manufacturer | FERRARI NORTH AMERICA |
Mfr Report Date | 19950701 |
NHTSA Campaign ID | 98V057000 |
Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES FITTED WITH SINGLE FUEL PUMPS. THE FUEL INJECTION LINE FITTING CAN FRACTURE IF THE ALUMINUM ***** ATTACHING THE LINES IS TIGHTENED EXCESSIVELY. |
Consequence | IF THE FUEL LINE FRACTURES, FUEL LEAKAGE CAN OCCUR. IF AN IGNITION SOURCE IS PRESENT, A FIRE COULD OCCUR. |
Remedy | DEALERS WILL REMOVE THE FUEL INJECTION LINES THAT HAVE ALUMINUM NUTS AND REPLACE WITH NEW LINES CONTAINING STEEL ATTACHING NUTS. |
Notes | OWNER NOTIFICATION BEGAN MARCH15, 1998.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FERRARI AT 1-201-816-2651.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
Component | STEERING:RACK AND PINION:RACK |
---|---|
Manufacturer | FERRARI NORTH AMERICA |
Mfr Report Date | 19950801 |
NHTSA Campaign ID | 96V013000 |
Summary | DEFECTIVE LEFT STEERING RACK MOUNTING SUPPORTS WERE IMPROPERLY HEAT TREATED RESULTING IN THE POSSIBLE FRACTURING OF THE SUPPORT. |
Consequence | IF THE STEERING RACK FRACTURES, LOSS OF VEHICLE CONTROL CAN OCCUR INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT. |
Remedy | DEALERS WILL REPLACE THE LEFT STEERING RACK MOUNTING SUPPORT WITH A NEW SUPPORT WHICH HAS BEEN PROPERLY HEAT TREATED. |
Notes | SYSTEM: STEERING; GEAR; RACK.VEHICLE DESCRIPTION: PASSENGER VEHICLES. NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME, SHOULD CONTACT FERRARI AT 1-201-816-2651. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
Component | SEAT BELTS:FRONT:ANCHORAGE |
---|---|
Manufacturer | FERRARI NORTH AMERICA |
Mfr Report Date | 19951001 |
NHTSA Campaign ID | 96V207000 |
Summary | THE PASSENGER SIDE SEAT BELT MECHANISM WHICH IS FITTED WITH THE CHILD SAFETY SEAT LOCKING MECHANISM WAS FITTED ON THE DRIVER SIDE AND THE DRIVER'S SIDE SEAT BELT MECHANISM WITHOUT THE LOCKING MECHANISM FITTED ON THE PASSENGER SIDE. |
Consequence | THE SEAT BELT MECHANISM (WITHOUT THE LOCKING DEVICE) MAY NOT LOCK FAST ENOUGH AND COULD ALLOW EXCESSIVE MOVEMENT OF THE CHILD SAFETY SEAT IN THE EVENT OF AN ACCIDENT. |
Remedy | DEALERS WILL INSPECT THE SEAT BELT MECHANISMS TO DETERMINE WHETHER THEY HAVE BEEN INSTALLED ON THE PROPER SIDE OF THE VEHICLE AND, IF NECESSARY, DISMOUNT AND REMOUNT THE MECHANISMS ON THE CORRECT SIDE. |
Notes | OWNER NOTIFICATION:OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING OCTOBER 1996. NOTE:OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FERRARI AT 1-201-816-2651.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
Data updated January 2023
1995 Averages
Avg. Car Cost : | $15,500 |
Avg. Household Income : | $35,900 |
Avg. Home : | $113,150 |
Avg. Gallon of Gas : | $1.10 |
Avg. Stamp : | $0 |
Total Car Production : | 11,985,457 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1995 Ferrari F355?
Q: How fast is the 1995 Ferrari F355? A: The 1995 Ferrari F355 has a top speed of 158 mph. Q: What is the wheelbase size of the 1995 Ferrari F355? A: The 1995 Ferrari F355 has a wheelbase size of 96.50 inches.Q: What is the length of the 1995 Ferrari F355? A: The 1995 Ferrari F355 has a length of 167.30 inches.Q: What is the width of the 1995 Ferrari F355? A: The 1995 Ferrari F355 has a width of 74.80 inches.Q: How much did the 1995 Ferrari F355 cost when new?A: The 1995 Ferrari F355 cost approximately $127,180 to $137,080 (USD) when new.Q: What were the bodystyles of the 1995 Ferrari F355? A: The 1995 Ferrari F355 was offered as a Berlinetta, Cabriolet, Challenge Berlinetta, Targa.Q: What tires did the 1995 Ferrari F355 have? A: The 1995 Ferrari F355 had Front : 225/40 ZR 18
Rear : 265/40 ZR 18 tires.Q: How many vehicles did Ferrari produce in 1995? A: Ferrari produced 700 automobiles in 1995.Q: How many F355 were produced? A: Ferrari produced 11,273 examples of the F355 from 1995 to 1999.Q: What engine did the 1995 Ferrari F355 have? A: The engine powering the 1995 Ferrari F355 was a V 8Vee-Type (3500 cc | 213.6 cu in. | 3.5 L.) with 375 BHP (276 KW) @ 8250 RPM and 268 Ft-Lbs (363 NM) @ 6000 RPM. Q: What transmission did the 1995 Ferrari F355 have? A: The 1995 Ferrari F355 had a 6 speed Manual gearbox.
What are the dimension and mechanical specifications of the 1995 Ferrari F355?
How many 1995 Ferrari F355 were produced?
How powerful was the 1995 Ferrari F355? Was the 1995 Ferrari F355 popular? Was the 1995 Ferrari F355 expensive? What was the fuel economy of the 1995 Ferrari F355?
Q: How fast is the 1995 Ferrari F355? A: The 1995 Ferrari F355 has a top speed of 158 mph. Q: What is the wheelbase size of the 1995 Ferrari F355? A: The 1995 Ferrari F355 has a wheelbase size of 96.50 inches.Q: What is the length of the 1995 Ferrari F355? A: The 1995 Ferrari F355 has a length of 167.30 inches.Q: What is the width of the 1995 Ferrari F355? A: The 1995 Ferrari F355 has a width of 74.80 inches.Q: How much did the 1995 Ferrari F355 cost when new?A: The 1995 Ferrari F355 cost approximately $127,180 to $137,080 (USD) when new.Q: What were the bodystyles of the 1995 Ferrari F355? A: The 1995 Ferrari F355 was offered as a Berlinetta, Cabriolet, Challenge Berlinetta, Targa.Q: What tires did the 1995 Ferrari F355 have? A: The 1995 Ferrari F355 had Front : 225/40 ZR 18Rear : 265/40 ZR 18 tires.Q: How many vehicles did Ferrari produce in 1995? A: Ferrari produced 700 automobiles in 1995.Q: How many F355 were produced? A: Ferrari produced 11,273 examples of the F355 from 1995 to 1999.Q: What engine did the 1995 Ferrari F355 have? A: The engine powering the 1995 Ferrari F355 was a V 8Vee-Type (3500 cc | 213.6 cu in. | 3.5 L.) with 375 BHP (276 KW) @ 8250 RPM and 268 Ft-Lbs (363 NM) @ 6000 RPM. Q: What transmission did the 1995 Ferrari F355 have? A: The 1995 Ferrari F355 had a 6 speed Manual gearbox.
Ferrari Challenge Series Vehicles