 1913 Silver Ghost | 1915 40/50 HP Silver Ghost  |
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
1914 Rolls-Royce Silver Ghost Shapiro-Schebera Skiff news, pictures, and information | ||
| Tweet | ||
 |  |  | Skiff Chassis Num: 54PB Engine Num: 45J |
| High bid of $725,000 at 2009 RM Auctions. (did not sell) Sold for $773,402 (473,000) at 2009 RM Auctions. | |||
The 1906 Tourist Trophy Race was won by a Rolls Royce, beating their nearest competitor by a full 27 minutes. The accolades continued with 15,000 mile reliability run of 1907. The Rolls Royce Silver Ghost finished the event and required an incredible £22s 7d to restore it to as-new specification (or about $10 at 1907 exchange rates).
The Silver Ghost was a mechanical marvel for its day. It had an L-head, six-cylinder engine that displaced 454 cubic-inches and had side valves. There was an aluminum alloy crankcase and a timing drive and ignition that was driven by gears, in-place of chains. The timing gears were made of phosphor bronze and nickel steel, which were ground and polished by hand. The crankshaft itself was ground to an accuracy of .025 on its bearing surfaces and then hand polished to remove any minute scratches left by the grinder. All this tedious and hard work translated into an engine that ran silently and without a puff of smoke.
54PB was placed on test on April 29th, 1914. The original owner was Mr. F. Herman of Brussels, Belgium. Five years later, it was still in Brussels, now in the care of a Mr. A. Lancer.
It is unknown if the car was delivered from the factory as a bare chassis or if it was given coachwork before entering the care of Mr. Herman. When it was in the care of Mr. Lancer, it is still unknown if the car had even been driven or if it was still a bare chassis.
Ernst Schebera founded Carrosserie Schebera GmbH in Berlin in 1911. In 1919, Jacob Shapiro became the managing director. After Shapiro lost a fortune in the stock market during the recession of 1922/23, NSU took over the coachbuilding business. The name was changed to Karosseriewerke Schebera AG, and Shapiro's association with the firm officially ended.
54PB wears coachwork that reads 'Shapiro - Schebera.' This places the body some time after 1919 and before 1922 (or possibly up to 1925). The factory records display no other owners of 54PB until 1925, when it was purchased by Messrs. A. Souraty & Cie of Cairo, Egypt. It is believed that they were automobile agents who subsequently passed the car on to Mr. Achmed Naguib Bev, also of Cairo, in 1926.
The next recorded owner is Gregory Malacos of Cairo, in 1947, followed by H. Williamson of Cairo in 1949, and then Mr. Platt. Dr. Robin O. Barnard of Chiddingfold, Surrey, and Mr. H. Vivian of London, learned of the car in 1956. Mr. Platt offered to loan them the car if they returned it to England and restore it as needed. Restoration work began and since it remained in good condition, only minor work was needed.
Mr. Pratt visited London and his newly restored car and was pleased with the work. He decided to sell the car to Dr. Barnard and Mr. Vivian and they became the joint owners. It would remain in their care for nearly three decades. It went to the next owner, and finally, in 1985, it was acquired by Bob Barrymore of California.
German automotive historian Hans Newbauer believes that the car was penned by Ernst Neuman-Neander. This belief is reinforced by the work performed by Mr. Neuman-Neander for several other German clients around 1920, with a similar style. The boat-tail Skiff body is undeniably unique and the level of craftsmanship required to create such a detailed body is unimaginable.
The wood appears to be of two different species; the body and side panels in mahogany and the deck in cherry or something similar. The gauges appear to be original, including the very rare Elliot Brothers speedometer. There is a Boa Constrictor horn, a raked vee windshield, and an original four-speed gearbox.
The current owners had the car sent to RM Restorations in 2004, where it was given a new convertible top and side-mount covers. Additional work was performed, bringing it back to its original condition. It was shown at the 2005 Pebble Beach Concours d'Elegance and participated in the adjoining tour. It received a Grand Marshall Award at the Cranbrook Concours and a Chief Judge Award at the Concours d'Elegance of the Eastern United States.
In 2009, this Silver Ghost Boat-Tail Skiff was offered for sale at the Automobiles of Arizona presented by RM Auctions. The lot was estimated to sell for $1,500,000 - $2,000,000. A high bid of $725,000 was not enough to satisfy the reserve and it was left unsold.
By Daniel Vaughan | Feb 2010
Skiff Automobiles
by Jules Heumann wîth excerpts from Frederick A. ÚsherSkiff automobile - a seemingly self-contradicting phrase. Are we speaking of a boat or a car? As it happens, we are speaking of both as one because the term skiff used in conjunction wîth automobile has come to refer to an open, sporting body erected upon an automotive chassis and constructed of wood, just as a boat would have been in the early years of the automobile. Indeed, the very definition of the word skiff in both English and French dictionaries means rowboat, small boat, dinghy, etcetera.
The construction of skiff bodies on automobile chassis was primarily a French innovation. Boat-shaped automobiles, designed specifically to cheat the wind, appeared in races as early as 1897, but more than a dozen years then passed before a boat inspired a tourer. The year was 1912 when a then-famous person, the Chevalier Rene de Knyff, approached the Heri Labourdette coachbuilding company to design and furnish a special body for him. Frederick Úsher, automotive historian of reknown, has researched this signal occation:
'Fortunately we do not have to hyphothesize about that occasion,' writes Úsher, 'since what transpired has been recorded for us by one of the protagonists, Jean-Henri Labourdette. This vignette and its significance can be better appreciated wîth brief sketches of the two actors in the drama.'In 1910, on the death of his father Henri, young Jean-Henri had taken over the direction of the coachbuilding firm founded by his grandfather in the nineteenth century. Jean-Henri Labourdette, born in 1888, now in his early twenties, not only had the credentials but had already exhibited the talent that such an inheritance might promise. Several years previously he had participated in the design and construction of an extra-light closed body for the Chevalier Rene de Knyff, and the Chevalier was greatly pleased wîth the results.
'In contrast to Labourdette and twice his age at the time, the Chevalier de Knyff was a towering figure from the heroic era of early automobile racing. From the very first races and for a half century thereafter he would devote his talent and intelligence to motor racing, finishing his career as president of the Commission Sportive International in 1946. There is hardly a comparative figure in the annals. Charles Jarrott, as a participant and eye-witness of these early years, gives us a vivid picture of de Knyff in his Ten Years of Motors and Motor Racing, first published in 1906:
From the very beginning of the sport, no race of importance was run without the Chevalier being a competitor...de Knyff always was and is today the most interesting figure...of the French automobile world.'At the time of their meeting in 1912 the Chevalier was a director of the Panhard et Levassor firm, whose powerful automobiles driven largely by the Chevalier had dominated the early races. What follows is Labourdette's account of his meeting wîth de Knyff:
The Chevalier Rene de Knyff invited me to his office and made me a proposal: 'I would like a very very light but comfortable torpedo offering the least wind resistance.' As he was a great sportsman and practiced bicycling and rowing daily, he suggested to me: 'You know that I do rowing. Why don't you build this body like my skiff, in mahogany wîth ribbing and all? It's light and strong.' I pointed out to him that a boat did not have doors and that was why its hull was rigid. 'That doesn't matter,' he responded. 'Make me a torpedo without doors.'
'But how will you get in?' I objected.'One will step over.'
'And the ladies?'
'Well, they will also step over. We will finally see their legs,' he laughed (in 1912, how daring it was to see a woman's legs).I left Rene de Knyff promising him a beautiful and efficient solution. But, on the way, I scratched my head. What to do? But I thought, as I went, that this project offered the opportunity to realize my idea of the integration of the hood wîth the body. Únderstanding and forward thinking, Rene de Knyff had left it to me.
To acquaint myself wîth naval construction, I went to the firm of Despujols who had been one of the first to construct motor-boats and who had a great reputation. Their shipyard was located at the Ile de Jatte.
I constructed the skiff in triple layers of mahogany planking, riveted on a frame of ash. According to what I had seen, between the second and third plies I had placed a layer of canvas, which assured great rigidity.Since it was almost impossible to sketch a form for the rear of the body I decided to model it. This was the first time, I think, that automobile body forms were studied by modeling in wax.
When the body was put on the scale the needle registered 180 kg (approximately 400 pounds) to the great admiration of the experts. This weight comprised the body, the windshield, the four fenders, the running boards (or step plates), spare wheel carrier, upholstery, the floorboards of grooved mahogany (they were elegant, light and we saved the weight of carpet). The ribs of the hull were exposed, thus we also saved the weight of interior trim....
'The resulting design was little short of revolutionary at the time', write Úsher. 'Today critics consider it to be one of the most beautiful automobiles ever, a masterpiece of the art of bodybuilding. To appreciate the impact of Labourdette's 'skiff' one must see it in the context of its contemporaries. Most designs of that era were characterized by a 'box' which covered the engine, terminating wîth a break at the windshield, and behind this, a bulky upholstered body for the passengers. At the very rear the fuel tank was slung between the frame rails.
'Labourdette's skiff combined all these separate elements into one harmonious whole wîth graceful transitions and elegant curving lines. The engine hood flared up to a low, slanting windshield and the gas tank was hidden behind the front seat to expose the rounded, voluptuous tail. And while the construction technique suggested by the Chevalier did produce the light weight he desired, the lines that Labourdette provided went on to visually accentuate the idea. After satisfying all its technical requirements there was the added elegance and flair typical of a Labourdette design.'
The emergence of the skiff theme as an automobile body design probably emanated from the increasing use of body designs that had certain aerodynamic qualities that lessened wind resistance, like the bow and sometimes the stern of a boat did.
It must be considered that the very unique appearance of a skiff body would be appealing to certain potential owners who needed to have something different, something no one else had. Skiff construction fulfilled this desire, but above all, it was possible to save weight, and that was tantamount to adding power to the engine concurrent wîth providing a new look. One could have an automobile of singular appearance that was more powerful than an automobile wîth a standard body.
In any case, the skiff idea took hold and soon Labourdette was erecting skiff bodies on many different chassis. Examples are known to have been constructed on chassis from Hispano-Suiza, Renault, Peugeot, Rolls-Royce, Abadal, Delauney-Belleville, Lancia and even Citroen.
Other coachbuilders were also active in designing and manufacturing skiffs although it was Labourdette that made the most of them and became famous for them, pioneering the most successful of the various types of skiff construction. It employed a lightweight but strong frame of ash ribs on close centers erected upon sturdy wood members forming the sills or longitudinal rails, thus forming the foundation for the body skin. Three layers of 3 to 4 millimeters of wood were then applied, wîth the innermost layer running at a 45 degree angle to the sills, the next layer at 90 degrees to the first, and the outermost layer running horizontally. A layer of canvas could be placed between the two diagonal layers. Then all layers were joined wîth copper rivets on close centers, and it is not an exaggeration to state that there could be 10,000 individual rivets in the bodies for larger cars. In some cases the compound curves of the body required intricate curves to be formed in wood and the only way to achieve these shapes was to steam-bend the pieces.
Mulbacher, Duquesne, Schebera and Ansart et Teisseire were other makers of skiff bodies, and all but the last used construction techniques similar to Labourdette. Ansart et Teisseire used solid wood planking of considerable thickness, thus limiting the forms the designer could require.
Even Nieuport, the airplane manufacturer made a sole skiff automobile. It was commissioned by Andre Dubonnet of aperitif and racing fame, and it became the famous Hisspano-Suiza known as the 'tulipwood' car. And there in lies a tale.
Much has been written about tulipwood being used on the exterior of skiff bodies. This is an entirely inaccurate statement as bodies of this type were made of mahogany. This is borne out by Labourdette himself in his book Úne Siecle de Carrosserie Francaise in which he consistently refers to skiff bodies being constructed of acajou (mahogany). Intensive research was initiated several years ago by an English Hispano-Suiza owner seeking to make a replica of the Dubonnet car specifically. He sought advice from a German professor whose expertise was the science of lumber. We quote from a letter from Dr. H. G. Richter of the Institute fur Holzbiolgie and Holzschutz (the Instititue for Wood Biology and Wood Protection) of Hamburg, Germany, in 1991 pursuant to his personal examination of the Dubonnet car:
The timbers employed for exterior planking of car body and wings are identical and certainly not tulipwood in the sense that this trade name was commonly used for (Dalbergia decipularis) of the botanical family of Fabacease. Neither does it correspond to any of the timbers that have, at one time or another, carried the trade name tulip wood as for instance 'Dalbergia nigra (Brazilian rosewood)...
According to surface characteristics (colour, grain, etc) and structural features accessible to microscopic examination the timber used for planking is one of the 'mahogany' group, most likely Swietenia macrophylla (Central or South America) or Swietenia mahogoni of the West Indies....
Furthermore, woods that could be classified as tulipwood are dense and hard and thus quite unacceptable for automobile body use; they would be prone to excessive cracking and cannot be used for compound curves. Various species of mahogany easily meet the requirements, and thus we see that the Nieuport and Labourdette bodies were mahogany. So too are the Mulbacher, Duquesne, and Ansart et Teisseire skiff bodies, by personal observation of the author of this article, whose professional career involved the use of mahogany and other woods.
A replica of the Chevalier Rene de Knyff skiff exists. It was undertaken by the Het Museum of Automobiles in the Netherlands, and although he did not live long enough to see it completed, Jean-Henri Labourdette lent his expertise and his memory to the reconstruction of the masterpiece.
Very few original examples of skiff type construction survive. The skiffs selected to be exhibited at Pebble Beach today are believed to be original - maintained but not restored or replicated - examples.Source - by Jules Heumann with excerpts from Frederick A. Usher
In 1906 a new model, the 40/50 horsepower, was developed wîth a longer chassis and a six-cylinder engine. The popularity of the new Rolls-Royce grew quickly as it developed a reputation for smoothness, silence, flexibility and, above all, reliability. In 1907 a writer from the 'Autocar' described riding in the Rolls-Royce 40/50 hp as '....the feeling of being wafted through the countryside.' Engineers at Rolls-Royce coined the word 'waftability' to encapsulate that sensation. Today it is a word that cannot be found in any direction but it is a key design and engineering criterion.
The twelfth 40/50 produced had all its fittings silver-plated and the coachwork painted in aluminum paint. This car became known as the Silver Ghost and is probably the most famous car in the world. The name was later adopted for all the 40/50 hp car and had an immediate international impact, enhanced by the coachbuilders of the day, who could produce bodies of breathtaking beauty. The Silver Ghost was, quite simply, in a class of its own.
The motor car's versatility is legendary. It overwhelmingly won every reliability trial and distance record, dominated the great Alpine Trial of 1913 and won the Spanish Grand Prix of that year.
In May 1907, Claude Johnson drove the car to Scotland and back. This run was a precursor to the Scottish Reliability Trial for which the motor car was later awarded a gold model by the RAC.
The original idea was to drive 10,000 miles without stopping the engine, but the Silver Ghost proved so reliable that the target was raised to 15,000 miles. Despite a stall at 629 miles, when rough roads shook the petrol switch to the off position, the Silver Ghost ran faultlessly for 40 days and nights.
A further challenge was designed by Napier for Rolls-Royce to compete against them in a run from London to Edinburgh followed by high-speed runs at Brooklands. But the challenge was to complete the distance without changing gear, as opposed to how far you could travel. The car, driven by Ernest Hives, averaged 24.3 mpg between London and Edinburgh and attained a speed of 78.2 mph at Brooklands.
As an armored car in the First World War The Silver Ghost delivered exemplary service to the extent that Colonel T.E Lawrence (Lawrence of Arabia) is quoted as saying, 'A Rolls in the desert is above rubies'.
In more elegant guise the Silver Ghost was the choice of the rich and famous across the globe. Kings, queens, maharajas, tsars and emperors owned them. The demand for the Silver Ghost was so high that manufacture was started in the Únited States in 1921 and continued in production wîth worldwide success until 1925.Source - Rolls-Rocye Motor Cars Limited
The twelfth 40/50 produced had all its fittings silver-plated and the coachwork painted in aluminum paint. This car became known as the Silver Ghost and is probably the most famous car in the world. The name was later adopted for all the 40/50 hp car and had an immediate international impact, enhanced by the coachbuilders of the day, who could produce bodies of breathtaking beauty. The Silver Ghost was, quite simply, in a class of its own.
The motor car's versatility is legendary. It overwhelmingly won every reliability trial and distance record, dominated the great Alpine Trial of 1913 and won the Spanish Grand Prix of that year.
In May 1907, Claude Johnson drove the car to Scotland and back. This run was a precursor to the Scottish Reliability Trial for which the motor car was later awarded a gold model by the RAC.The original idea was to drive 10,000 miles without stopping the engine, but the Silver Ghost proved so reliable that the target was raised to 15,000 miles. Despite a stall at 629 miles, when rough roads shook the petrol switch to the off position, the Silver Ghost ran faultlessly for 40 days and nights.
A further challenge was designed by Napier for Rolls-Royce to compete against them in a run from London to Edinburgh followed by high-speed runs at Brooklands. But the challenge was to complete the distance without changing gear, as opposed to how far you could travel. The car, driven by Ernest Hives, averaged 24.3 mpg between London and Edinburgh and attained a speed of 78.2 mph at Brooklands.
As an armored car in the First World War The Silver Ghost delivered exemplary service to the extent that Colonel T.E Lawrence (Lawrence of Arabia) is quoted as saying, 'A Rolls in the desert is above rubies'.In more elegant guise the Silver Ghost was the choice of the rich and famous across the globe. Kings, queens, maharajas, tsars and emperors owned them. The demand for the Silver Ghost was so high that manufacture was started in the Únited States in 1921 and continued in production wîth worldwide success until 1925.Source - Rolls-Rocye Motor Cars Limited
The Rolls-Royce vehicles have always been the pinnacle of design, technology, and ambiance. The loudest noise that could be heard by occupants of their vehicles was said to be the clock. In 1904 engineer Frederick Henry Royce joined with the entrepreneur and businessman, the Honorable Charles Stewart Rolls. This union became known as the Rolls-Royce Company.
The Silver Ghost became available in 1906 and brought with it quality and technology to a level that had never been seen before on a motor vehicle. Most engines of the time had long and flexible crankshafts that were prone to vibration and noise. The Rolls-Royce engines had large bearings and pressurized oiling systems, secured by seven main bearings. This was then enclosed in a strong aluminum alloy crankcase eliminating much noise and creating a pleasurable driving experience for the occupants of the vehicle. The crankshaft had an accuracy of .00025 on its bearing surface. They were hand polished to remove any surface cracks left by the grinder. Instead of using noisy chains to drive the ignition, Royce used gears. Phosphor bronze and nickel steel were used in the construction of the timing gears which were then ground and polished by hand. The engine was further shortened by casting in triplets. Cooling problems and leaks were eliminated by the removable cylinder blocks and fixed heads. A Royce designed twin jet carburetor gave the engine all the breathing it required.
The Rolls Royce vehicles could accelerate from zero to top speed without shifting. Shifting during the early 1900's was a chore, with the lower gears never being smooth. It was not until top gear was achieved that the automobiles would operate properly. The Rolls-Royce Ghosts would accelerate as though they were being pulled. This feature, coupled with the vehicles silent operation amplified the vehicles prestige and was the ultimate driving experience of its day.
When first introduced, the Ghosts were given a four-speed gearbox with a direct drive third and an overdrive fourth. As time passed, the overdrive was dropped. The chassis was mostly conventional. Royce had fine-tuned the chassis to standards much higher than most marque's of the day. The body was held in place by a live rear axle carried in three quarter elliptical springs. In the front there was a solid axle supported by semi-elliptic leaf springs. Braking was by a food pedal connected to a transmission brake. A hand brake operated twin rear drums.
Where Royce excelled in engineering, Rolls excelled in promoting and marketing. In 1906 a Ghost was entered in the Tourist Trophy Race, one of the most prestigious races of the time. The Ghost emerged victorious - well, much more than that. It had beaten the next nearest competitor by 27 minutes. Next, Rolls and Royce entered a Ghost in a 15,000 mile reliability run in 1907 which it did without incident. Upon its return to the Rolls-Royce shop, it took a small amount of money, about two-pounds or roughly ten-dollars by today's exchange rates, to restore the vehicle back to new condition.
The Silver Ghosts were entered in the Austrian Alpine Trials where the hoods were sealed shut to prevent any maintenance. The Silver Ghosts again dominated the competition and traversed the Alpine passes which were impassable for many motor cars.
This marketing worked and soon the Rolls-Royce vehicles became legendary and renowned for their durability, reliability, and style. To improve upon the prestige even further, Rolls supplied the Silver Ghosts to British royalty, a move that made sure the vehicles were seen in the right places by the right people.
The first Rolls-Royce distributor in the United States was Walter Martin of New York City, who was also a Cadillac distributor. As Cadillac continued to improve the ambiance of their vehicles, Martin naturally gave them more attention as the logistics of company location was in their favor. Rolls-Royce, on the other hand, was an ocean apart.
Over the early years of Rolls-Royce production, Brewster would become more effective in bringing Rolls-Royce chassis to America than Martin. Brewster imported several dozen chassis to supply its coachwork clients.
In 1913, the business manager for Rolls-Royce, Claude Johnson, formed a factory depot in New York and rented space from Brewster. Baker's US agent, Robert W. Schuette was appointed as Rolls-Royce distributor. At the time, Schuette also represented Fleetwood, Holbrook, Brewster, and Quinby. Around 100 Rolls-Royce's were imported over the next two years by Schuette, with around half of them bodied by Brewster.
As the First World War began to escalate, the production of Rolls-Royce automobiles slowed considerably. The factory's attention was turned to cars for military clients. Engines were produced for aircraft. By 1916, there were no more new Rolls-Royces available. Schuette and Brewster were still able to satisfy US demand for Rolls-Royce's by buying up existing chassis, renovating, and then fitting them with new coachwork.
By Daniel Vaughan | May 2008
For more information and related vehicles, click hereThe Silver Ghost became available in 1906 and brought with it quality and technology to a level that had never been seen before on a motor vehicle. Most engines of the time had long and flexible crankshafts that were prone to vibration and noise. The Rolls-Royce engines had large bearings and pressurized oiling systems, secured by seven main bearings. This was then enclosed in a strong aluminum alloy crankcase eliminating much noise and creating a pleasurable driving experience for the occupants of the vehicle. The crankshaft had an accuracy of .00025 on its bearing surface. They were hand polished to remove any surface cracks left by the grinder. Instead of using noisy chains to drive the ignition, Royce used gears. Phosphor bronze and nickel steel were used in the construction of the timing gears which were then ground and polished by hand. The engine was further shortened by casting in triplets. Cooling problems and leaks were eliminated by the removable cylinder blocks and fixed heads. A Royce designed twin jet carburetor gave the engine all the breathing it required.
The Rolls Royce vehicles could accelerate from zero to top speed without shifting. Shifting during the early 1900's was a chore, with the lower gears never being smooth. It was not until top gear was achieved that the automobiles would operate properly. The Rolls-Royce Ghosts would accelerate as though they were being pulled. This feature, coupled with the vehicles silent operation amplified the vehicles prestige and was the ultimate driving experience of its day.
When first introduced, the Ghosts were given a four-speed gearbox with a direct drive third and an overdrive fourth. As time passed, the overdrive was dropped. The chassis was mostly conventional. Royce had fine-tuned the chassis to standards much higher than most marque's of the day. The body was held in place by a live rear axle carried in three quarter elliptical springs. In the front there was a solid axle supported by semi-elliptic leaf springs. Braking was by a food pedal connected to a transmission brake. A hand brake operated twin rear drums.
Where Royce excelled in engineering, Rolls excelled in promoting and marketing. In 1906 a Ghost was entered in the Tourist Trophy Race, one of the most prestigious races of the time. The Ghost emerged victorious - well, much more than that. It had beaten the next nearest competitor by 27 minutes. Next, Rolls and Royce entered a Ghost in a 15,000 mile reliability run in 1907 which it did without incident. Upon its return to the Rolls-Royce shop, it took a small amount of money, about two-pounds or roughly ten-dollars by today's exchange rates, to restore the vehicle back to new condition.
The Silver Ghosts were entered in the Austrian Alpine Trials where the hoods were sealed shut to prevent any maintenance. The Silver Ghosts again dominated the competition and traversed the Alpine passes which were impassable for many motor cars.
This marketing worked and soon the Rolls-Royce vehicles became legendary and renowned for their durability, reliability, and style. To improve upon the prestige even further, Rolls supplied the Silver Ghosts to British royalty, a move that made sure the vehicles were seen in the right places by the right people.
The first Rolls-Royce distributor in the United States was Walter Martin of New York City, who was also a Cadillac distributor. As Cadillac continued to improve the ambiance of their vehicles, Martin naturally gave them more attention as the logistics of company location was in their favor. Rolls-Royce, on the other hand, was an ocean apart.
Over the early years of Rolls-Royce production, Brewster would become more effective in bringing Rolls-Royce chassis to America than Martin. Brewster imported several dozen chassis to supply its coachwork clients.
In 1913, the business manager for Rolls-Royce, Claude Johnson, formed a factory depot in New York and rented space from Brewster. Baker's US agent, Robert W. Schuette was appointed as Rolls-Royce distributor. At the time, Schuette also represented Fleetwood, Holbrook, Brewster, and Quinby. Around 100 Rolls-Royce's were imported over the next two years by Schuette, with around half of them bodied by Brewster.
As the First World War began to escalate, the production of Rolls-Royce automobiles slowed considerably. The factory's attention was turned to cars for military clients. Engines were produced for aircraft. By 1916, there were no more new Rolls-Royces available. Schuette and Brewster were still able to satisfy US demand for Rolls-Royce's by buying up existing chassis, renovating, and then fitting them with new coachwork.
By Daniel Vaughan | May 2008
| AUDI DELIVERS 100TH CUSTOMER RACE CAR | |
 | • Audi R8 LMS ultra handed over to MS RACING on Tuesday • Current ADAC GT Masters champion's team to start relying on Audi • Car number '100' symbolizes success of the program Ingolstadt, April 3, 2013 – Newcomer to Audi Sport customer racing: Team MS RACING is switching to Audi and will be fielding two new R8 LMS ultra cars in the 2013 ADAC GT Masters. On Tuesday, quattro GmbH handed over the 100th race car from Heilbronn-Biberach, a facility of the Neckarsulm l...[Read more...] |
| HITTING THE SPOT: BMW GROUP DESIGN WINS FOUR RED DOT AWARDS IN 2013 | |
 | The BMW Group can add another chapter to its successful history in the red dot awards, with BMW Group Design taking home four of the internationally renowned distinctions in the red dot award: product design 2013 competition. The BMW M6 Gran Coupe, BMW 1 Series, BMW 3 Series Touring and BMW R 1200 GS motorcycle were granted red dot design awards in the 'Automotive and Transportation' category in acknowledgement of their excellent design quality. The awards will be presented at the red dot gala, ...[Read more...] |
| FIVE MILLION AUDI QUATTRO DRIVE SYSTEMS | |
 | VICTORY LAP FOR A SUPERIOR TECHNOLOGY - Five millionth Audi with permanent all-wheel drive rolls off the assembly line - A successful 33 years for quattro on the road and in motorsport AUDI AG celebrates a very special event today – the five millionth Audi with a quattro drive system. The car is a white Audi A6 allroad 3.0 TDI; it rolled off the assembly line at the Neckarsulm plant. The record is a testament to the leading role played by the pioneering all-wheel drive – no other ...[Read more...] |
| Project Visio.M: Electric mass mobility for urban environments. | |
 | Electric vehicles powered by electricity from renewable energy sources are an attractive option for mobility within the urban area and beyond. However, previous approaches lead to vehicles that either are too heavy and too expensive or do not meet mass-market safety requirements. Within the joint research project Visio.M scientists at the Technische Universitaet Muenchen (TUM), in cooperation with engineers from the automotive industry, will develop concepts to produce electric cars that are eff...[Read more...] |
| The Champion in Touring Car Racing : The BMW M3 | |
 | In August 1985, a rumour surfaced in motor magazine Auto-Deutschland which emanated from a new sports car. An A Group Car from BMW that was a thoroughbred racing car according to the rules but was also to be produced in a version licensed to drive on open roads for everyday use. Speculation about this dream car that could take to normal roads and was intended for the 'Most dynamic among BMW 3 Series drivers' was right on target. But the pundits missed the mark about the motor-sport car by a mile...[Read more...] |
 1914
Rolls-Royce
models |
| Rolls-Royce Silver Ghost |
| Similar Automakers | |
| Aston Martin | Bentley |
| Bugatti | Devon |
| Ferrari | GTA |
| Koenigsegg | Lamborghini |
| Lotus | Maserati |
| Maybach | McLaren |
| Porsche | Spyker |
| Tesla | |
| Rolls-Royce: 1911-1920 |
| Similar Automakers |
| Other models by Rolls-Royce |
| Related Articles and Event Coverage |
| 61st Pebble Beach Concours d'Elegance |
| Automobiles of Arizona |
| 19th Annual Concours d'Elegance of the Eastern United States |
| 2005 Pebble Beach Concours d'Elegance |
| ||||||||||||||||||||||||||||||||
| 1913 Silver Ghost | 1915 40/50 HP Silver Ghost |
