1989 Porsche 911 Navigation
Features
Engine Location : | Rear |
Drive Type : | Rear Wheel |
Body / Chassis : | Steel Monocoque |
Production Years for Series : | 1984 - 1989 |
Price : | $51,200-$85,100 |
Weight : | 2600 lbs | 1179.34 kg |
Engine & Transmission
Opposed 6 | |
---|---|
Displacement : | 3164 cc | 193.1 cu in. | 3.2 L. |
Power : | 215 BHP (158.24 KW) @ 5900 RPM |
Torque : | 195 Ft-Lbs (264 NM) @ 4800 RPM |
Bore : | 3.7 in | 95 mm. |
Stroke : | 2.9 in | 74 mm. |
Compression : | 9.5:1 |
Main Bearings : | 8 |
Construction : | Aluminum block and head |
DME Ignition and Fuel Injection |
Turbocharged Opposed 6 | |
---|---|
Displacement : | 3299 cc | 201.3 cu in. | 3.3 L. |
Power : | 282 BHP (207.552 KW) @ 5500 RPM |
Torque : | 288 Ft-Lbs (390 NM) @ 4000 RPM |
Bore : | 3.8 in | 97 mm. |
Stroke : | 2.9 in | 74 mm. |
Compression : | 7.0:1 |
Main Bearings : | 8 |
Construction : | Aluminum block and head |
5 Manual In rear transaxle; G50
Production Figures
Total Porsche Production for 1989 : | 9,479 |
1989 Porsche 911 | |
Speedster 2 dr. : | 2,065 |
Dimension(s)
Coupe
Doors : | 2 |
Exterior | |
---|---|
Length : | 168.9 in | 4290 mm. |
Width : | 65.0 in | 1651 mm. |
Height : | 52.0 in | 1321 mm. |
Wheelbase : | 89.5 in | 2273 mm. |
Front Track : | 54.0 in | 1372 mm. |
Rear Track : | 55.3 in | 1405 mm. |
Targa
Price : | $52,400 |
Weight : | 2600 lbs | 1179.34 kg |
Doors : | 2 |
Exterior | |
---|---|
Length : | 168.9 in | 4290 mm. |
Width : | 65.0 in | 1651 mm. |
Height : | 52.0 in | 1321 mm. |
Wheelbase : | 89.5 in | 2273 mm. |
Front Track : | 54.0 in | 1372 mm. |
Rear Track : | 55.3 in | 1405 mm. |
Cabriolet

Price : | $59,210 |
Weight : | 2600 lbs | 1179.34 kg |
Doors : | 2 |
Exterior | |
---|---|
Length : | 168.9 in | 4290 mm. |
Width : | 65.0 in | 1651 mm. |
Height : | 52.0 in | 1321 mm. |
Wheelbase : | 89.5 in | 2273 mm. |
Front Track : | 54.0 in | 1372 mm. |
Rear Track : | 55.3 in | 1405 mm. |
Coupe

Chassis # WP0AB0916KS120791
Engine # 64K03381
View info And history



Chassis # WP0AB0913KS120943
View info And history
Auction entries : 1

Chassis # WP0EB0917KS173811
View info And history
Auction entries : 3
Price : | $71,000 |
Weight : | 2800 lbs | 1270.059 kg |
Doors : | 2 |
Exterior | |
---|---|
Length : | 168.9 in | 4290 mm. |
Width : | 65.0 in | 1651 mm. |
Height : | 52.0 in | 1321 mm. |
Wheelbase : | 89.5 in | 2273 mm. |
Front Track : | 54.0 in | 1372 mm. |
Rear Track : | 55.3 in | 1405 mm. |
Targa

Chassis # WPOEB0911KS160603
View info And history

Chassis # WPOEB0910KS160463
Auction entries : 1

Chassis # WPOEB0911KS160441

Chassis # WP0EB0914KS160742
Engine # 64K03695
View info And history
Auction entries : 2
Price : | $77,000 |
Weight : | 2800 lbs | 1270.059 kg |
Doors : | 2 |
Exterior | |
---|---|
Length : | 168.9 in | 4290 mm. |
Width : | 65.0 in | 1651 mm. |
Height : | 52.0 in | 1321 mm. |
Wheelbase : | 89.5 in | 2273 mm. |
Front Track : | 54.0 in | 1372 mm. |
Rear Track : | 55.3 in | 1405 mm. |
Cabriolet

Chassis # WP0EB0919KS170800
View info And history
Auction entries : 1

Chassis # WP0ZZZ91ZKS173618
View info And history
Auction entries : 2

Chassis # WP0EB0930KS070599
View info And history
Auction entries : 1
Price : | $85,100 |
Weight : | 2800 lbs | 1270.059 kg |
Doors : | 2 |
Exterior | |
---|---|
Length : | 168.9 in | 4290 mm. |
Width : | 65.0 in | 1651 mm. |
Height : | 52.0 in | 1321 mm. |
Wheelbase : | 89.5 in | 2273 mm. |
Front Track : | 54.0 in | 1372 mm. |
Rear Track : | 55.3 in | 1405 mm. |
Speedster

Chassis # WP0EB0914KS173071
View info And history
Auction entries : 2

Chassis # WP0EB0913KS173191
View info And history
Auction entries : 1

Chassis # WP0EB0916KS173315
Engine # 64K05823
View info And history
Auction entries : 1

Chassis # WPOEB0912KS173568
Engine # 64K06171
View info And history
Auction entries : 1

Chassis # WP0EB0912KS173716
View info And history
Auction entries : 1

Chassis # WP0EB0915KS173287
Engine # 64K05848
View info And history
Auction entries : 1

Chassis # WP0EB0915KS173273
Auction entries : 1

Chassis # WP0EB0916KS173721
Engine # 64K063338
View info And history
Auction entries : 1

Chassis # WP0EB0918KS173770
Engine # 64K06482
View info And history
Auction entries : 2

Chassis # WP0EB0918KS173607
View info And history
Auction entries : 1

Chassis # WP0EB0914KS173605
View info And history
Auction entries : 1

Chassis # WP0EB0916KS173217
Engine # 64K05779
View info And history
Auction entries : 2

Chassis # WP0EB0912KS173229
Engine # 64K05691
View info And history
Auction entries : 1

Chassis # WP0EB0917KS173128
Engine # 64K05584
View info And history
Auction entries : 1

Chassis # WP0EB0910KS173116
View info And history
Auction entries : 2

Chassis # WP0EB091XKS173043
View info And history
Auction entries : 1

Chassis # WP0EB0918KS173283
View info And history
Auction entries : 3

Chassis # WP0EB091XKS173673
View info And history
Auction entries : 1

Doors : | 2 |
Exterior | |
---|---|
Length : | 168.9 in | 4290 mm. |
Width : | 65.0 in | 1651 mm. |
Height : | 52.0 in | 1321 mm. |
Wheelbase : | 89.4 in | 2271 mm. |
Front Track : | 54.0 in | 1372 mm. |
Rear Track : | 55.3 in | 1405 mm. |
Handling
Suspension | |
---|---|
Front : MacPherson struts with single lower transverse A-arms, longitudinal torsion bars and anti-roll bar Rear : Semi-trailing arms with transverse torsion bar and anti-roll bar |
Steering | |
---|---|
Rack and Pinion |
Recall
Component | LATCHES/LOCKS/LINKAGES:HOOD:LATCH |
---|---|
Manufacturer | PORSCHE CARS N.A. INC. |
Mfr Report Date | 19880401 |
NHTSA Campaign ID | 91V012000 |
Summary | LUGGAGE IN THE LUGGAGE COMPARTMENT AND OR PLASTIC TRIM SURROUNDING THE SAFETY LATCH MAY PREVENT THE LATCH ON THE FRONT HOOD FROM PROPERLY LOCKING. |
Consequence | LATCH FAILURE COULD CAUSE HOOD TO OPEN AND OBSTRUCT THEDRIVER'S FRONT VIEW WHICH COULD RESULT IN AN ACCIDENT. |
Remedy | REPLACE PLASTIC TRIM PIECE AND INSTALL A BRACKET BEHIND THE SAFETY LATCH TO PREVENT INTERFERENCE. |
Notes | SYSTEM: HOOD SAFETY LATCH.VEHICLE DESCRIPTION: PASSENGER CARS. |
Component | VEHICLE SPEED CONTROL |
---|---|
Manufacturer | PORSCHE CARS N.A. INC. |
Mfr Report Date | 19880401 |
NHTSA Campaign ID | 92V142000 |
Summary | THE BALL SOCKETS ON THE CRUISE CONTROL LINKAGE CAN BREAK, ALLOWING THE CRUISE CONTROL LINKAGE TO BECOME DETACHED ON ONE END AND JAM ON NEARBY COMPONENTS, WHICH COULD IMPAIR THROTTLE PLATE OPERATION. |
Consequence | IMPAIRED THROTTLE PLATE OPERATION COULD PREVENT THEENGINE FROM RETURNING TO IDLE, RESULTING IN UNWANTED ENGINE SPEED AND POSSIBLEVEHICLE ACCIDENT. |
Remedy | REPLACE THE CURRENT PLASTIC BALL SOCKETS WITH A NEW LINKAGE USING STEEL BALL SOCKETS, AND LUBRICATE THE CRUISE CONTROL RELAY LEVER. OWNERS ARE ADVISED NOT TO USE THE CRUISE CONTROL UNTIL THE MODIFICATION IS INSTALLED. |
Notes | SYSTEM: CRUISE CONTROL.VEHICLE DESCRIPTION: PASSENGER CARS; CARRERA 2 AND CARRERA 4 MODELS. |
Component | ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS |
---|---|
Manufacturer | PORSCHE CARS N.A. INC. |
Mfr Report Date | 19880401 |
NHTSA Campaign ID | 93V204000 |
Summary | AFTER THE ENGINE HAS BEEN TURNED OFF, THE REAR HEATER WILL AUTOMATICALLY OPERATE IN ORDER TO DISSIPATE HEAT IN THE ENGINE HEATING SYSTEM. DURING THIS OPERATION, THE RESISTOR FOR THE REAR HEATER BLOWER CAN BECOME OVERLOADED DUE TO A BINDING OR SEIZED REAR HEATER BLOWER. |
Consequence | THE OVERLOADED RESISTOR CAN CREATE HEAT SUFFICIENT TOIGNITE THE PLASTIC AIR PIPE TO WHICH IT IS CONNECTED, RESULTING IN AN ENGINECOMPARTMENT FIRE. |
Remedy | PORSCHE DEALERS WILL INSTALL A NEW RESISTOR CONTAINING A CIRCUIT BREAKER. |
Notes | SYSTEM: HEATER; WATER; DEFROSTER; CIRCUIT BREAKER.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPONSERVICE DATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME AND FREEOF CHARGE OR THE REMEDY DOES NOT CORRECT THE DEFECT OR NONCOMPLIANCE, PLEASECONTACT PORSCHE SERVICE CENTER AT 1-800-545-8039. ALSO CONTACT THE NATIONALHIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
Component | STEERING: STEERING WHEEL/HANDLE BAR |
---|---|
Manufacturer | PORSCHE CARS N.A. INC. |
Mfr Report Date | 19880401 |
NHTSA Campaign ID | 96V147000 |
Summary | A PART OF THE STEERING COLUMN UPPER UNIVERSAL JOINT CRACKED DURING THE MANUFACTURING PROCESS. |
Consequence | THIS CONDITION COULD RESULT IN NOISE AND FREE PLAY IN THE STEERING SYSTEM AND IF LEFT UNCORRECTED, WILL RESULT IN LOSS OF STEERING CONTROL. |
Remedy | DEALERS WILL INSPECT THE UNIVERSAL JOINT FOR CRACKS AND WILL REPLACE CRACKED JOINTS WITH NEW PARTS. |
Notes | OWNER NOTIFICATION:OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING AUGUST 1996. NOTE:OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT PORSCHE AT 1-800-545-8039.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
Component | FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS |
---|---|
Manufacturer | PORSCHE CARS N.A. INC. |
Mfr Report Date | 19880601 |
NHTSA Campaign ID | 91V103000 |
Summary | DUE TO ROUTING OF FUEL LINE FROM THE FUEL TANK TO REAR FUEL PUMP, THE FUEL LINE MAY BE DAMAGED UNDER CERTAIN DRIVING CONDITIONS. ON FULL TRAVEL OF LEFT REAR SUSPENSION (JOUNCE), THE BRACKET FOR THE BRAKE PAD WEAR INDICATOR WIRE ON LEFT REAR CONTROL ARM COULD CONTACT AND DAMAGE FUEL LINE. |
Consequence | A DAMAGED FUEL LINE MAY RESULT IN A FUEL LEAK WHICH MAYIGNITE, RESULTING IN A FIRE. |
Remedy | REPLACE DAMAGED FUEL LINE: IN ADDITION ALL FUEL LINES WILL BE REROUTED SO THAT THE BRAKE PAD WEAR INDICATOR WIRE BRACKET CANNOT CONTACT FUEL LINE. |
Notes | SYSTEM: FUEL LINE DAMAGEVEHICLE DESCRIPTION: PORSCHE 911 TURBO MODEL. |
Data updated June 2024
1989 Averages
Avg. Car Cost : | $15,350 |
Avg. Household Income : | $27,450 |
Avg. Home : | $120,000 |
Avg. Gallon of Gas : | $0.97 |
Avg. Stamp : | $0 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1989 Porsche 911?
Q: What is the wheelbase size of the 1989 Porsche 911? A: The 1989 Porsche 911 has wheelbase sizes of 89.40 and 89.50 inches.Q: What is the length of the 1989 Porsche 911? A: The 1989 Porsche 911 has a length of 168.90 inches.Q: What is the width of the 1989 Porsche 911? A: The 1989 Porsche 911 has a width of 65.00 inches.Q: How much did the 1989 Porsche 911 cost when new?A: The 1989 Porsche 911 cost approximately $51,200 to $85,100 (USD) when new.Q: What were the bodystyles of the 1989 Porsche 911? A: The 1989 Porsche 911 was offered as a Cabriolet, Coupe, Speedster, Targa.Q: How many vehicles did Porsche produce in 1989? A: Porsche produced 9,479 automobiles in 1989.Q: What engines did the 1989 Porsche 911 have? A: The 1989 Porsche 911 had the following engine options: Opposed 6 (3164 cc | 193.1 cu in. | 3.2 L.) with 215 BHP (158.24 KW) @ 5900 RPM and 195 Ft-Lbs (264 NM) @ 4800 RPM Turbocharged Opposed 6 (3299 cc | 201.3 cu in. | 3.3 L.) with 282 BHP (207.552 KW) @ 5500 RPM and 288 Ft-Lbs (390 NM) @ 4000 RPM Q: What transmission did the 1989 Porsche 911 have? A: The 1989 Porsche 911 had a 5 speed Manual In rear transaxle; G50 gearbox.
What are the dimension and mechanical specifications of the 1989 Porsche 911?
How many 1989 Porsche 911 were produced?
How powerful was the 1989 Porsche 911? Was the 1989 Porsche 911 popular? Was the 1989 Porsche 911 expensive? What was the fuel economy of the 1989 Porsche 911?
Q: What is the wheelbase size of the 1989 Porsche 911? A: The 1989 Porsche 911 has wheelbase sizes of 89.40 and 89.50 inches.Q: What is the length of the 1989 Porsche 911? A: The 1989 Porsche 911 has a length of 168.90 inches.Q: What is the width of the 1989 Porsche 911? A: The 1989 Porsche 911 has a width of 65.00 inches.Q: How much did the 1989 Porsche 911 cost when new?A: The 1989 Porsche 911 cost approximately $51,200 to $85,100 (USD) when new.Q: What were the bodystyles of the 1989 Porsche 911? A: The 1989 Porsche 911 was offered as a Cabriolet, Coupe, Speedster, Targa.Q: How many vehicles did Porsche produce in 1989? A: Porsche produced 9,479 automobiles in 1989.Q: What engines did the 1989 Porsche 911 have? A: The 1989 Porsche 911 had the following engine options: Opposed 6 (3164 cc | 193.1 cu in. | 3.2 L.) with 215 BHP (158.24 KW) @ 5900 RPM and 195 Ft-Lbs (264 NM) @ 4800 RPM- 1989 Porsche 911 Menu
- Article
- Image gallery
- Valuation
- Specifications
- Profiles
- Recalls
- Production figures